Installation Guide for UTV Stereo models including: UTVS-XPD-RSA Polaris Xpedition Rear Speaker Adapters, UTVS-XPD-RSA, Polaris Xpedition Rear Speaker Adapters, Xpedition Rear Speaker Adapters, Rear Speaker Adapters, Speaker Adapters

UTVS-XPD-RSA-INSTRUCTIONS Web p2

UTV Stereo

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 1 Pages, 2.51MB

Document Document

POLARIS XPEDITION REAR SPEAKER ADAPTERS
PART #: UTVS-XPD-RSA

PARTS LIST:

Rear Overhead Speaker Adapters

x2

Speaker Wire Harness

x2

Mounting Hardware:

Button Head Screws

x12

Black Countersunk Screws

x8

RECOMMENDED PRODUCTS:

1

1.

Remove the two screws shown here

2.
Pull off the speaker and unplug from the OEM plug

3.
Remove the 4 screws on the speaker grille

SIGNATURE SERIES 6.5" SPEAKERS
PART #: UTVS-654 *SOLD SEPARATELY
RGB LED 6.5" SPEAKER RINGS
PART #: UTVS-65LSR *SOLD SEPARATELY

4.
Remove the 4 screws on the speaker mount

5.
Unplug the OEM speaker from the enclosure

6.
Place the UTV Stereo speaker mount onto the OEM enclosure and secure
using included hardware

7.
Connect the speaker wire harness to the UTV Stereo Speaker

8.
Plug in the speaker to the OEM plug

9.
Place the speaker into the enclosure and secure using included hardware

10.
Place enclosure back into the vehicle and plug in before securing to the roof

11.
Use the same OEM screws to secure the enclosure to the roof

Repeat for the other side

We are here to help! Reach out to us at info@utvstereo.com or call us at 480.616.2299