Babyhawk Race User Manual

Disclaimer

Please read the disclaimer carefully before using this product. By using this product, you agree to this disclaimer and signify that you have read it carefully and completely. This product is not suitable for people under the age of 18. Adult supervision is highly recommended for children under 18. The Babyhawk Race features open-source flight controller and Electronic Speed Controllers for FPV enthusiasts. Read the instruction manual and warnings carefully. Before each flight, ensure the battery is fully charged and power connections are secure. Do not fly around crowds, children, animals, or objects. EMAX accepts no liability for damage(s) or injuries incurred directly or indirectly from the use of this product.

Precautions

1. Please follow the instructions to assemble and operate this product properly.
2. Pilots should not use this product if experiencing physical or mental illness, dizziness, fatigue, or if under the influence of alcohol or drugs.
3. Please fly in a safe area away from people.
4. Do not modify or use parts and accessories not approved by EMAX.
5. Do not use this product in harsh environments (e.g., strong winds, rain, lightning, snow).
6. Do not use this product in a strong electromagnetic environment.

Product Specification

Product List

1. BabyHawk Race × 1
2. Manual ×1
3. AVAN-MICRO 2 inch Propeller ×2 or 3030 Propeller ×2
4. Screw pack×1
5. Camera adjusting board×1

Drone Component Diagram Description:

The diagram illustrates the EMAX Babyhawk Race drone with its various components labeled. These include: Top Frame, Arm of frame, AVAN-MICRO 2inch prop, VTX, Camera, F3 Magnum mini, Receiver, Front shell, Middle plate, Bottom plate, and Non-slip silicone.

VTX Frequency Chart

Navigation Instructions:

1. Enter/Exit Menu: Press and hold the button for 5 seconds.

2. Select Menu Item: After entering the menu, click the button to cycle through Band (R), Channel (C), or Power (P).

3. Enter/Exit Parameters: Select a menu item, then press and hold the button for 2 seconds to enter parameter selection. Press and hold for 2 seconds again to exit parameter selection and return to the menu option. Press and hold for 5 seconds to exit the menu directly.

4. Select Parameter: Within parameter selection, click the button to choose a specific parameter value.

EMAX Tiny Receiver Instruction

Specifications

• Dimension: 16 × 9 × 3.3mm (L × W × H)
• Weight: 0.55g
• Number of Channels: Up to 8CH from SBUS (CH1~CH7 for PWM, CH8 RSSI for FC)
• Operating Voltage Range: 3.7~6V
• Operating Current: 50mA@5V
• Compatibility: FrSky D8 mode

Binding Procedure

Binding is the process of uniquely associating a particular receiver to a transmitter module. A transmitter module can be bound to multiple receivers (not to be used simultaneously). A receiver can only be bound to one transmitter module.

1. Hold the bind button while powering on the receiver. When the GREEN LED is on, it means the receiver is in BIND MODE.
2. Turn on the transmitter and set it into bind status. When the RED LED of the receiver starts flashing, it means bind is successful.
3. Turn on the transmitter again. The GREEN LED on the receiver will be solid, indicating it is receiving data from the transmitter. Transmitter binding with the receiver does not require repetitive operation, unless you change either the receiver or transmitter.

F3 Magnum Mini Tower Instruction

The FC and ESCs of Babyhawk_Race are based on the F3 Magnum Mini Tower System. Please download the manual from the following link for more details and information: http://yinyanmodel.com/En/DownList.asp.

Conclusion

Thank you for purchasing our product! Enjoy your flight with EMAX.

Visit us at:

www.emaxmodel.com

www.emax-USA.com

Warning: REMINDER! Please pay attention to safety of your surrounding. Not recommended for persons under 18 years of age! We wish you happy flying!