Babyhawk Race User Manual
Thank you for purchasing the Babyhawk Race. Please follow this manual to assemble and configure your drone.
Disclaimer
Please read the disclaimer carefully before using this product. By using this product, you agree to this disclaimer and confirm you have read it thoroughly. This product is not suitable for individuals under 18 years of age. Adult supervision is highly recommended for children under 18.
The Babyhawk Race features open-source flight controller and Electronic Speed Controllers, designed for FPV enthusiasts seeking upgrades. Read the instruction manual and warnings carefully. Before each flight, ensure the battery is fully charged and power connections are secure. Do not fly around crowds, children, animals, or objects. EMAX accepts no liability for damages or injuries incurred directly or indirectly from the use of this product.
Precautions
- Follow the instructions to assemble and operate this product correctly.
- Do not use this product if you have physical or mental illness, dizziness, fatigue, or are under the influence of alcohol or drugs.
- Fly in a safe area away from people.
- Do not modify or use parts and accessories not approved by EMAX.
- Do not use this product in harsh environments (e.g., strong winds, rain, lightning, snow).
- Do not use this product in a strong electromagnetic environment.
Product Specifications
| Size and Weight | Version | Babyhawk R 2inch Propeller | Babyhawk R 3inch Propeller |
|---|---|---|---|
| Diagonal Wheelbase (without propeller) | 112mm | 136mm | |
| Maximum size of Drone (Without antenna, cable) | 162mm | 207mm | |
| Propeller | AVAN-MICRO 2 inch | 3030 propeller | |
| Drone weight (Without battery) | 82.8g | 92.5g | |
| Flight Tower (FC/ESC) | F3 Magnum (OMNIBUS firmware) Bullet 12A (BLHeli_S) 4IN1 ESC | ||
| Motor | RS1106-6000KV | ||
| Camera | Foxeer Micro Arrow CCD Camera | ||
| VTX | 25-200MW adjustable frequency 40CH | ||
| Receiver (Optional) | EMAX Tiny receiver (Compatible with FrSky D8 mode) | ||
Product List
- BabyHawk Race Unit × 1
- Manual × 1
- AVAN-MICRO 2 inch Propeller × 2 pairs or 3030 Propeller × 2 pairs
- Screw pack × 1
- Camera adjusting board × 1
- Foxeer Mirco Arrow Camera adjusting board × 1
Diagram Description: The drone features a central frame with arms extending outwards. Components are labeled: Top Frame, Receiver, VTX, F3 Magnum mini, Camera, Front shell, Middle plate, Bottom plate, Arm of frame, Non-slip silicone. Propellers are attached to the motors on the arms.
VTX Frequency Chart
Menu Navigation:
- Entry/Exit Menu: Press and hold the button for 5 seconds to enter or exit the menu.
- Select Menu Item: After entering the menu, single-click the button to cycle through Band (R), Channel (C), or Power (P).
- Entry/Exit Parameters:
- After selecting a menu item, press and hold the button for 2 seconds to enter parameter selection.
- Press and hold for 2 seconds again to exit parameter selection and return to the menu option.
- Press and hold for 5 seconds to exit the menu directly.
- Select Parameter: When in parameter selection, single-click the button to choose the desired parameter value.
VTX Button Menu Diagram Description: The diagram shows a button and an antenna connection. A flow chart illustrates menu navigation: a 5-second press enters the menu. Within the menu, single clicks cycle through Band (R), Channel (C), and Power (P). A 2-second press enters parameter selection for each. The available bands are F, R, A, B, E. Channel options are 1-8. Power options are L (25mW) and H (200mW). A 5-second press exits the menu.
Frequency Table:
| Band | CH1 | CH2 | CH3 | CH4 | CH5 | CH6 | CH7 | CH8 | Unit |
|---|---|---|---|---|---|---|---|---|---|
| F | 5740 | 5760 | 5780 | 5800 | 5820 | 5840 | 5860 | 5880 | MHz |
| R | 5658 | 5695 | 5732 | 5769 | 5806 | 5843 | 5880 | 5917 | MHz |
| A | 5865 | 5845 | 5825 | 5805 | 5785 | 5765 | 5745 | 5725 | MHz |
| B | 5733 | 5752 | 5771 | 5790 | 5809 | 5828 | 5847 | 5866 | MHz |
| E | 5705 | 5685 | 5665 | 5645 | 5885 | 5905 | 5925 | 5845 | MHz |
EMAX Tiny Receiver Instruction
Specifications:
- Dimensions: 16 × 9 × 3.3mm (L × W × H)
- Weight: 0.55g
- Channels: Up to 8CH via SBUS (CH1-CH7 for PWM signal, CH8 for FC RSSI signal)
- Operating Voltage Range: 3.7-6V
- Operating Current: 50mA @ 5V
- Compatibility: FrSky D8 mode
Diagram Description: The receiver is a small rectangular component with pins labeled SBUS, +5V, GND. A 'bind' button and an antenna connection point are also shown.
Binding Procedure: Binding is the process of associating a receiver to a transmitter module. A transmitter can be bound to multiple receivers (not simultaneously), and a receiver can only be bound to one transmitter.
- Hold the receiver's bind button and power it on. A solid GREEN LED indicates BIND MODE.
- Turn on the transmitter and set it to bind status. A flashing RED LED on the receiver indicates successful binding.
- Power on the transmitter again. A solid GREEN LED on the receiver indicates it is receiving data. Binding does not need to be repeated unless the receiver or transmitter is changed.
F3 Magnum Mini Tower Instruction
The FC (Flight Controller) and ESCs (Electronic Speed Controllers) of the Babyhawk Race are based on the F3 Magnum Mini Tower System. For more details and information, please download the manual from: http://yinyanmodel.com/En/DownList.asp
Conclusion
Thank you for purchasing our product! Enjoy your flight with EMAX.
Visit us at: www.emaxmodel.com
Visit us at: www.emax-usa.com
⚠️ Warning: Please pay attention to your surroundings for safety. Not recommended for persons under 18 years of age! We wish you happy flying!
