BX-P-OPCUA
Price: $189.00
The BX-P-OPCUA is an OPC Unified Architecture (OPC UA) gateway module. It is a cross-platform, open-source standard designed for secure, reliable data exchange from sensors to cloud applications.
- Securely connects clients to industrial devices with minimal configuration complexity.
- Seamlessly integrated into the Do-more! platform, providing native support for fast setup and tight compatibility with Do-more! PLCs.
- Allows users to easily select tags for transmission by browsing and choosing specific data points without needing to edit complex configurations.
- Facilitates easy configuration of read/write access to tags.
- Supports secure data transmission, leveraging built-in encryption, authentication, and certificates to protect sensitive data.
- Adheres to a standardized and vendor-neutral OPC UA standard, ensuring platform-agnostic compatibility and long-term interoperability.
- Ideal for IT/OT integration, bridging industrial control systems and enterprise applications with ease.
BX-P-OPCUA Specifications
| Description | Ethernet-based OPC UA gateway |
| Transfer Rate | 10/100 Mbps |
| Port Status LED | LINK LED is solid when network is established. ACT LED flashes when port is active. |
| Supported Protocols | OPC UA Server |
| Cable Recommendation | C5E-STxxx-xx from AutomationDirect.com |
| Port Type | RJ45, Category 5, Auto Crossover |
| Ethernet Port Numbers: OPC UA Server | 4840 default (configurable), UDP |
| Hot Swappable | Yes |
| Software Version Required | Do-more! Designer v2.11 or later |
Pinout and Connector Details
The module utilizes an 8-pin RJ45 connector (also known as 8P8C). The following table outlines the pin assignments and their corresponding signals:
| Pin # | Signal |
|---|---|
| 1 | TXD+ Transmit Data |
| 2 | TXD- Transmit Data |
| 3 | RXD+ Receive Data |
| 4 | N/C (Not Connected) |
| 5 | N/C (Not Connected) |
| 6 | RXD- Receive Data |
| 7 | N/C (Not Connected) |
| 8 | N/C (Not Connected) |
A diagram illustrates the 8-pin RJ45 connector, showing pins numbered 1 through 8. The connector also features two status indicator LEDs: LINK and ACT. Pin 1 is located at the bottom and Pin 8 at the top when the connector is viewed with the clip facing upwards. The diagram also indicates that the connector supports 10/BASE-T/100BASE-TX Ethernet standards.
