Altec Lansing IMT8000 Party Speaker

Portable Party On The Go

Key Features

Brand: Altec Lansing

Model: IMT8000

Features:

1. In the Box

Your Altec Lansing IMT8000 package includes:

2. Input/Output Ports

The speaker features the following ports and controls on its rear panel:

POWER: OFF/ON Switch

VOLUME: Dial for adjusting audio volume.

LIGHT MODES: Button to control lighting effects (hold for strobe).

▶️ /MIC VOL-: Button for previous track or decreasing microphone volume.

▶️▶️ /MIC VOL+: Button for next track or increasing microphone volume.

BASS: Dial for adjusting bass levels.

TREBLE: Dial for adjusting treble levels.

DC 5V IN: Port for charging the speaker.

AUX IN: 3.5mm auxiliary input jack for wired audio sources.

MIC IN: 1/4" microphone input jack.

LED Indicator: Displays charging status (Red when charging).

3. Speaker Controls

Detailed description of the controls:

4. Audio Modes

Bluetooth Pairing

To connect wirelessly via Bluetooth:

  1. Press the Power button to turn the speaker ON.
  2. On your smartphone or device, navigate to the Bluetooth settings.
  3. Ensure Bluetooth is enabled.
  4. Select 'AL SoundRover 50' from the list of available devices to pair.

The speaker's LED Indicator will flash blue during pairing and turn solid blue once successfully connected.

AUX Input

For wired audio connections:

  1. Insert one end of a 3.5mm audio cable (not included) into the speaker's AUX IN jack.
  2. Connect the other end of the cable to your audio device's headphone or audio output jack.

The LED Indicator will illuminate solid blue when an audio cable is connected.

5. Light Modes

Control the speaker's lighting effects:

6. Microphone Use

To use a microphone for singing or announcements:

7. Safety Precautions

Please observe the following safety guidelines:

8. Specifications

**Playtime is for reference only and may vary based on volume level and use of lighting features. Approximately 6 hours of playtime is achievable at around 40% volume level.

9. FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Support Information:

If you are experiencing issues, Altec Lansing offers support:

Call us 24/7 at 1-855-292-4087

Email us at support@alteclansing.com

Visit us at alteclansing.com

Please keep this manual and all relevant information for future reference.

10. Warranty

This warranty covers the original consumer purchaser only and is not transferable.

This warranty covers products that fail to function properly under normal usage due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year from the date of purchase.

What Is Not Covered by Warranty:

Damages or malfunctions not resulting from defects in material or workmanship, and damages or malfunctions from other than normal use. This includes, but is not limited to, repair by unauthorized parties, tampering, modification, or accidents.

To Obtain Warranty Service and Troubleshooting Information:

Call 1-855-292-4087 or visit our website at www.alteclansing.com.

To receive warranty service, including the name and address of an authorized product service center, the original consumer purchaser must contact Altec Lansing for problem determination and service procedures. Proof of purchase (e.g., bill of sale or receipted invoice) evidencing that the product is within the applicable warranty period must be presented to obtain service. It is the purchaser's responsibility to properly package and send any defective products, along with a dated copy of proof of purchase, a written explanation of the problem, and a valid return address, to the authorized service center at the purchaser's expense. Do not include any other items or accessories with the defective product. Any products received by the authorized service center that are not covered by warranty will be returned unrepaired.

Disclaimer: NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE EXPRESSLY DESCRIBED ABOVE SHALL APPLY. Altec Lansing further disclaims all warranties after the express warranty period stated above. No other express warranty or guaranty given by any person, firm, or entity with respect to the product shall be binding on Altec Lansing. Repair, replacement, or refund of the original purchase price—at Altec Lansing's sole discretion—are the exclusive remedies of the consumer. In no event will Altec Lansing, its manufacturers, or SAKAR International, Inc. be liable for any incidental, direct, indirect, special, punitive, or consequential damages (such as, but not limited to, damages for loss of profits, business, savings, data, or records) caused by the use, misuse, or inability to use the product. Except as stated herein, no other warranties shall apply. Notwithstanding the foregoing, consumer's recovery against Altec Lansing shall not exceed the purchase price of the product sold by Altec Lansing. This warranty shall not extend to anyone other than the original consumer who purchased the product and is not transferable.

Some countries, states, or provinces do not allow the exclusion or limitation of incidental or consequential damages or allow limitations on warranties, so these limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights that vary from state to state or province to province. Contact your authorized retailer to determine if another warranty applies. This product is manufactured, distributed, and sold by SAKAR International, Inc. All other trademarks are the property of their respective owners, who have not sponsored, endorsed, or approved this product.

Models: IMT8000 Party Speaker, IMT8000, Party Speaker, Speaker

File Info : application/pdf, 12 Pages, 1.83MB

PDF preview unavailable. Download the PDF instead.

IMT8000 manual 10.16 ?v=12902994602139505935

References

Adobe Illustrator 25.2 (Windows) Adobe PDF library 15.00

Related Documents

Preview Altec Lansing IMT7006 Portable Party Speaker Quick Start Guide
This guide provides essential information for setting up and using the Altec Lansing IMT7006 portable party speaker, including unboxing, controls, connectivity options, light modes, microphone and tripod usage, specifications, safety precautions, and warranty details.
Preview Altec Lansing Mini LifeJacket IMW475 Rugged Bluetooth Speaker Quick Start Guide
Quick start guide for the Altec Lansing Mini LifeJacket IMW475 rugged Bluetooth speaker. Learn how to charge, pair, listen to music, use wired input, and activate Siri. Includes warranty information and technical support details.
Preview Altec Lansing Dual Motion IMW140 Bluetooth Speaker Quick Start Guide
Quick start guide for the Altec Lansing Dual Motion IMW140 Bluetooth speaker, covering setup, pairing, music playback, phone calls, and warranty information.
Preview Altec Lansing Soundrover Pro 650: Quick Start Guide and Features
Comprehensive guide to the Altec Lansing Soundrover Pro 650 bi-amplified active speaker, covering setup, connections, audio modes, lighting effects, true wireless pairing, and specifications.
Preview Altec Lansing HydraBoom 2.0 EVERYTHINGPROOF Wireless Speaker - Quick Start Guide & Manual
Get started with your Altec Lansing HydraBoom 2.0 EVERYTHINGPROOF Wireless Speaker. This guide covers setup, charging, Bluetooth pairing, controls, safety, specifications, and warranty.
Preview Altec Lansing SoundRover IMT8100 Quick Start Guide
Quick start guide for the Altec Lansing SoundRover IMT8100 wireless party speaker, covering setup, connections, controls, audio modes, light modes, speaker pairing, microphone use, safety, and specifications.
Preview Altec Lansing Mini H2O Rugged Bluetooth Speaker Quick Start Guide
This quick start guide provides essential instructions for the Altec Lansing Mini H2O Rugged Bluetooth Speaker (IMW255), covering package contents, button functions, charging, Bluetooth pairing, music playback, wired audio input, Siri activation, and warranty information.
Preview Altec Lansing HydraWave EVERYTHINGPROOF Wireless Speaker (IMW1032) - User Manual & Quick Start Guide
Comprehensive guide for the Altec Lansing HydraWave EVERYTHINGPROOF Wireless Speaker (Model IMW1032), covering setup, charging, Bluetooth pairing, controls, safety, specifications, and warranty information. Learn how to get the most out of your device.