SOLBO Table Lamp
This document provides assembly and safety information for the SOLBO table lamp from IKEA.
Important Safety Information
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard. If you are uncertain, please contact IKEA.
Assembly Steps
The following steps illustrate the assembly process:
-
Step 1
Attach the lamp shade to the base using three screws. A screwdriver is required.
Diagram Description: Shows a person using a screwdriver to attach the owl-shaped lamp shade to a circular base with three screws.
-
Step 2
Insert the internal components into the lamp shade.
Diagram Description: Shows the inside of the lamp shade with internal components being inserted.
-
Step 3
Connect the bulb holder and wiring to the base.
Diagram Description: Shows the bulb holder and wiring being connected to the base, with a depiction of a light bulb and a trash bin for packaging.
-
Step 4
Slide the lamp shade onto the assembled base, ensuring it is properly aligned.
Diagram Description: Shows the lamp shade being slid onto the base, with a close-up indicating a locking mechanism.
-
Step 5
Secure the lamp shade to the base with three screws.
Diagram Description: Similar to Step 1, showing the lamp shade being secured with screws.
-
Step 6
Connect the power adapter to the lamp.
Diagram Description: Shows a power adapter being plugged into the lamp's power port.
Bulb Replacement
Important: When changing the bulb, use only a GUZ 5.3 LED bulb.
Diagram Description: Shows a person changing a light bulb in the lamp, emphasizing the use of a GUZ 5.3 LED bulb.
Product Information
Product Name: SOLBO
Brand: IKEA
Type: Table Lamp
Bulb Type: GUZ 5.3 LED
Part Number/Identifier: 157314, 10068193
Contact Information
For any questions or concerns, please contact your local IKEA store.