Edifier W820NB Plus Wireless Noise Cancellation Over-Ear Headphones Manual

Power ON/OFF

Power ON: Press and hold the power button [power-symbol] for approximately 3 seconds when powered OFF until the LED blinks blue.

Power OFF: Press and hold the power button [power-symbol] for approximately 3 seconds when powered ON until the LED blinks red.

Notes:

• Under wireless mode: If there is no Bluetooth connection for 5 minutes after power on, the headphones will turn off automatically.
• If there is no Bluetooth connection when the noise cancellation is on, the headphones will turn off automatically after 4 hours.

Pairing

Pairing for the first time

1. Press and hold the power button [power-symbol] for about 3 seconds when powered off. The blue and green LED will blink alternately and rapidly.
2. Select "EDIFIER W820NB Plus" in your device's settings to connect. The blue LED will blink twice after connection.

Pairing for a new device

1. Press and hold the power button [power-symbol] for about 6 seconds when powered off to skip the latest connected device and pair a new Bluetooth device. The blue and green LED will blink alternately and rapidly.
2. Select "EDIFIER W820NB Plus" in your device's settings to connect. The blue LED will blink twice after connection.

Note: For subsequent use, the headphones will automatically connect to the device used last time.

Reset

Simultaneously press and hold the power button [power-symbol] and the volume down button [volume-down-symbol] for about 5 seconds when powered on to clear pairing records. The blue LED will blink 6 times rapidly when successful.

Charging

1. Connect the small end of the included USB cable to the USB-C port of the headphones and connect the other end to a USB-A power supply or wall charger (not included).
2. The orange LED is steady lit when charging and turns off when fully charged.

Note: Please do not charge the headphones when there is sweat or other liquids inside the charging port, as this may damage the headphones.

Input: 5V 1A

Connecting to PC as wired headphones

1. Connect the small end of the included USB cable to the USB-C port of the headphones and connect the other end to the USB-A port of the PC. You can listen to music, talk, and charge the headphones after the connection is successful.
2. The orange LED is steady lit when charging and the green LED is steady lit when fully charged.

Note: It is recommended to use the included USB cable, as other cables may have compatibility issues that prevent them from working properly.

Controls

• Power Button [power-symbol]: Press and hold for 3s for Power ON/OFF. Press and hold for 6s for pairing.
• Volume Up Button [volume-up-symbol]: Press for next track. Press and hold for volume up.
• Volume Down Button [volume-down-symbol]: Press for previous track. Press and hold for volume down.
• ANC Button [ANC-symbol]: Press for ANC/Ambient Sound toggle.
• Multi-function Button [multi-function-symbol]: Press once to play/pause music or answer/end call. Press and hold for 2 seconds to reject call. Press twice for voice assistant.

Notes:

• Default sound control: Noise cancellation & ambient sound.
• Download the Edifier Connect App for more customizable control settings.

Specifications

• Model: EDF200118
• Bluetooth Version: 5.2
• Battery Capacity: 800mAh
• Playtime: Up to 60 hours (ANC off)
• Charging Time: Approx. 2.5 hours
• Input: 5V ⎓ 1A
• Frequency Response: 20Hz-20KHz
• Sound Pressure Level: 94±3dB(A)
• Weight: Approx. 270g
• Operating Temperature: +5°C to +40°C
• Storage Temperature: -20°C to +60°C
• Humidity: 10% to 85%

Compliance Information

FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IC Statement: CAN ICES-003(B) / NMB-003(B). FCC ID: Z9G-EDF200 IC: 10004A-EDF200

EU Declaration of Conformity: Hereby, Edifier International Limited declares that the radio equipment type EDF200118 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.edifier.com/int/eu-doc.html

Frequency Band: 2400MHz-2483.5MHz

RF Power Output: 13dBm (EIRP)

Specific Absorption Rate (SAR) information: This device meets the government's requirements for exposure to radio waves. The guidelines are based on standards developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: (EDF200118) (FCC ID: Z9G-EDF200) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification when properly worn on the body is 0.046W/kg. This device was tested for typical body-worn operations with the back of the handset kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 0mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Use only the supplied or an approved antenna.

Body-worn Operation: This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 0mm must be maintained between the user's body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Bodyworn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.