Jensen CMR8629 Quick Start Guide

Control Panel

The control panel features a 6.8-inch TFT touch screen display. Key controls include:

1. Power / Source Mode
2. Volume Up
3. Mute
4. Volume Down
5. Home
6. micro SD Media Port
7. BT Microphone
8. Reset
9. Touch Screen Display

IR Remote Control

The remote control has the following functions:

1. Power
2. Play/Pause
3. Seek Up / Next Track
4. Volume Down
5. Enter
6. Dial 2
7. Dial 3
8. Dial 5
9. Dial 6
10. Dial 8
11. Dial 9 #
12. Dial 0 +
13. Keypad Backspace
14. Answer Call / End call
15. Dial 7 *
16. Dial 4
17. Dial 1
18. Mute
19. Seek Down / Previous Track
20. Source Mode
21. Volume UP

How to Replace the Battery

Uses CR2025 replacement battery only.

Slide the tray out on the back of the remote control and insert the battery with the (+) and minus (-) poles pointing in the proper direction. Remember to remove the battery shipping protector.

Support and Manuals

For a complete owner's manual, please visit: https://www.jensenmobile.com/user-manuals.html

For customer service, call: 1-888-921-4088 (Monday-Friday, 9 AM-5 PM EST) or email: cs@dualav.com.

Installation

Describes the typical front load ISO-DIN method.

Wiring Diagram - Input / Outputs

Illustrates the input and output connections for the receiver.

Safety Notice

Video/movie playback will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash video/movie functions will only operate when the vehicle is in Park and the parking brake is engaged. It is illegal in most jurisdictions for the driver to view video while the vehicle is in motion.

Main Menu

Press the top-left Source icon to enter the Main Source Menu. In Menu mode, press the desired icon to enter the respective mode:

1. Radio Direct
2. Media Player Last Source
3. BT Handsfree Direct
4. USB Direct
5. microSD Card Direct
6. BT Streaming Direct
7. AUX In Direct
8. Rear/Front Camera
9. Main System Setup Menu ⚙️
10. Press Clock to Standby Monitor (Press screen anywhere to return; Audio will still continue to play while in Standby mode).

Tuner Operation

Select the Tuner icon from the Main Menu screen.

1. Current Mode Icon / Main Source Menu
2. Tuner Presets (Long press to set)
3. AM Direct
4. FM Direct
5. Bluetooth Handsfree Direct
6. Stereo / Mono
7. AS/PS - Auto Scan / Preset Scan
8. Direct Station Entry
9. Station Search
10. EQ Settings
11. Previous Station (Long Press Manual Tune)
12. Station Number
13. Next Station (Long Press Manual Tune)
14. Station RDS RT Information Title
15. RDS Information Alert
16. Quick BAND Select - FM 1-2-3 | AM 1-2
17. Radio RDS Setup Menu
18. Monitor Standby
19. Loc/DX

Tuner Region: < Americas >

EQ Operation

Press the EQ icon in each Source to select EQ settings. Source Tone Memory: Each Source will remember their EQ settings.

EQ Controls:

1. Main System Volume
2. EQ Settings
3. EQ On/Off
4. Loudness On/Off
5. EQ Reset
6. Return to Source
7. EQ Presets / Custom
8. Balance / Fader

Subwoofer controls (Frequency, Fader, Balance) do not have Source Tone Memory.

Subwoofer Controls:

1. Main Volume
2. Fader Reset
3. Subwoofer ON/OFF
4. Return to Source
5. Return to EQ Controls

Media Player Operation

USB/microSD Media operation works similarly to Bluetooth streaming.

USB/microSD Controls:

1. Current Mode / Main Source Menu
2. BT Streaming Music Direct
3. USB Media Direct
4. SD Media Direct
5. Bluetooth Handsfree Direct
6. Shuffle On / Off
7. Repeat 1 | All | Off
8. Direct File Entry
9. Drive File List
10. EQ Settings
11. Track Down
12. Play/Pause
13. Track Up
14. Track Time / Status Bar
15. File Playing - ID3 Metadata
16. File Playing - Album Art
17. Track Counter of Folder
18. Press Clock to Standby Monitor

BT Streaming Media Controls:

1. Track Down
2. Play/Pause
3. Track Up

Hands-free Operation

Bluetooth Microphone: The microphone is built-in. For best conversation quality, stay within 3 feet (1 meter) of the unit's microphone when talking.

Pairing and Connecting: Pair your mobile phone to the CMR8629. The device name is "JENSEN BT", and the passcode is "0000". For best reception, ensure the mobile phone battery is fully charged before pairing.

• Try to perform pairing within a few minutes of turning on the mobile phone.
• Once paired, "JENSEN BT" will be displayed on the mobile phone.
• Keep the mobile phone within 10 feet (3 meters) of the unit.
• Maintain a clear path between the mobile phone and the unit, avoiding metal objects.
• Do not use "Power Saving Mode" on your mobile phone with the CMR8629.
• Ensure your mobile phone's Bluetooth function is turned on before accepting or making a call.

Dialing a Number

Press keypad to dial a number.

Making a Call

Dial number, press to connect a call.

Call Controls:

1. Current Mode / Main Source Menu
2. Dial Keypad
3. Back to Last Source
4. Bluetooth Keypad
5. Contacts (must be manually synced)
6. Keypad Backspace
7. Recent Calls
8. Device Manager
9. Call Button
10. Number
11. Press Clock to Standby Monitor (Press screen anywhere to return; Audio will still continue to play while in Standby).

Transferring Audio

Press to transfer call audio between the headunit and mobile phone.

1. Hang Up
2. Call Transfer
3. MIC Mute
4. Return to Keypad

System Settings ⚙️

Press the GEAR icon in the MAIN Source Menu.

1. Back to Main Menu
2. General Setup
3. Clock Settings
4. System Audio
5. Bluetooth
6. Display - RGB LED, TFT
7. About - Software Version

One-Year Limited Warranty

This warranty gives you specific legal rights. Namsung America Inc. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of original purchase.

Namsung America Inc. agrees, at its option, to repair or replace defective products during the warranty period. Subsequent replacement products are warranted for the balance of the original warranty period.

Who is covered?

This warranty is extended to the original retail purchaser for products purchased from an authorized Jensen dealer and used in the U.S.A.

What is covered?

Covers all defects in material and workmanship. Not covered: software, installation/removal costs, damage from accident, misuse, abuse, neglect, modification, improper installation, incorrect line voltage, unauthorized repair, or failure to follow instructions. Software license conditions and copyright notices are available at www.jensenmobile.com.

What to do?

1. Check the troubleshooting guide in your owner's manual before calling for service.
2. If service is required, pack the product carefully (preferably in original packaging) and ship it by prepaid transportation with a copy of the original receipt to an authorized service center.
3. Include a written description of the problem, your name, a UPS shipping address (no P.O. Boxes), and a daytime phone number.

For more information and service center locations, contact Jensen: Call toll-free at 1-888-921-4088 (Monday-Friday, 9:00 a.m. to 5:00 p.m. EST) or E-mail at cs@dualav.com.

Exclusion of Certain Damages: This warranty is exclusive and in lieu of all other warranties, expressed or implied. Namsung America Inc. shall not be liable for indirect, incidental, or consequential damages.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

If this equipment causes harmful interference to radio or television reception, try to correct it by: reorienting or relocating the receiving antenna; increasing the separation between the equipment and receiver; connecting the equipment to an outlet on a different circuit; or consulting the dealer or an experienced radio/TV technician.