Marking_LED2403R5NA GU10_NA

Brand: IKEA

Product: LED2403R5NA GU10 LED Lamp

Product Image Description

A visual depiction of a GU10 LED lamp, showing its design and the area designated for marking.

Marking Position: Indicated on the product.

Safety and Usage Warnings

⚠️ CAUTION: RISK OF ELECTRIC SHOCK

Usage: Use in dry location only.

Compatibility: ? DO NOT USE WITH STANDARD DIMMERS. Please ? SEE INSTRUCTIONS for proper usage.

⚠️ ATTENTION: RISQUE DE CHOC ÉLECTRIQUE

Usage: UTILISER DANS UN EMPLACEMENT SEC UNIQUEMENT.

Compatibility: NE PAS UTILISER AVEC DES GRADATEURS STANDARD, SE REPORTER AUX INSTRUCTIONS.

Technical Specifications

Power: 120V~60Hz

Lumen Output: 632lm

Lumens per Watt: 117lm/W

Wattage: 5.4W

Current: 60mA

Color Temperature: 2700K

Base Type: GU10

Beam Angle: 40°

Regulatory Information

FCC ID: FHO-LED2403R5NA

IC: 10912A-LED2403R5NA

Canadian Compliance: CAN ICES (B) / NMB (B)

Symbols: Includes symbols for product certification and environmental disposal (e.g., chain link symbol, circular arrow symbol, QR code).

Manufacturing and Labeling Details

Remark: The text "WS" should be bold.

QR Code Content (MT: Base-38 code):

MT is fixed. Base-38 code is created by Version, Vendor ID, Product ID, Custom Flow, Discovery Capabilities Bitmask, Discriminator, Passcode, Padding, and TLV Data.
Manufacturing code is created by 11 digits, consisting of VidPidPresentFlag, Discriminator, Discriminator, and Passcode. Text font is Arial, 6pt.
The digital code is calculated using VidPidPresentFlag Discriminator, Discriminator, Passcode, and the Verhoeff checksum.
The QR code is applied as a sticker label on the product.
Label size: 12*12mm. QR code size: 8mm*8mm.

Labeling Instructions for Origin:

For products manufactured in Thailand: Replace "Made in XXX ABCDE" with "Made in Thailand, 50170".
For products manufactured in China: Replace "Made in XXX ABCDE" with "Made in China 50050".

Chinese Text Translation:

Label: Plain white label 12*12mm, QR code part 8*8mm, 2mm margin between QR code and label edge.

Origin 1 (Thailand): If produced in Thailand, Made in XXX ABCDE should be changed to Made in Thailand, 50170. When Made in Thailand, Made in XXX ABCED will be Made in Thailand 50170.

Origin 2 (China): If produced in China, Made in XXX ABCDE should be changed to Made in China 50050. When Made in China, Made in XXX ABCED will be Made in China 50050.

Document Information

Document Type: This document is a product marking and technical specification sheet.

Drawing Details:

Description: [Description placeholder]
Name: [Name placeholder]
Replaces Document: No. of Pages: 1 (1)
Doc Number: [Doc Number placeholder]
Version: [Version placeholder]

Draft Status: This document is marked as DRAFT.

Property and Usage Rights

This drawing is IKEA's property and is covered by industrial and intellectual property rights. Without written consent from IKEA, it must not be copied, reproduced, communicated, or used for any other purpose than agreed.

Measurements are according to the SI systems.

Template Version: 3.0

	TÜV Rheinland EMC Test Report: IKEA LED2403R5NA Self-Ballasted LED Lamp Comprehensive EMC test report from TÜV Rheinland for IKEA's LED2403R5NA self-ballasted LED lamp, detailing conducted and radiated emissions testing against FCC and IC standards.
	Prüfbericht für IKEA LED2403R5NA Selbstleuchtende LED-Lampen Umfassender Prüfbericht von TÜV Rheinland für die IKEA LED2403R5NA selbstleuchtende LED-Lampe, die Bluetooth, Zigbee und Thread unterstützt. Enthält detaillierte Testergebnisse zur Konformität mit FCC und RSS-Standards.
	TÜV Rheinland Test Report: IKEA LED2403R5NA Self-ballasted LED Lamp RF Performance Official test report from TÜV Rheinland for the IKEA LED2403R5NA self-ballasted LED lamp, detailing RF characteristics, conducted and radiated emissions, bandwidth, output power, and power spectral density according to FCC and RSS standards.
	IKEA Attestation Statement: Not Covered Entity Applicant for FCC Filing Attestation statement from IKEA of Sweden AB confirming their status as a not covered entity applicant for FCC filing, referencing FCC ID FHO-LED2403R5NA and submitted to the Federal Communications Commission.
	IKEA FHO-LED2403R5NA Attestation Statement for FCC Compliance This document is an attestation statement from IKEA of Sweden AB for FCC ID FHO-LED2403R5NA, confirming that the equipment is not 'covered' equipment as defined by FCC rules.
	IKEA U.S. Agent Designation for FCC Service of Process - FHO-LED2403R5NA Official designation of IKEA of Sweden AB's U.S. Agent for Service of Process for FCC certification, including contact details for Go Global Compliance, Inc. and IKEA.
	IKEA of Sweden AB Authority to Act as Agent for Equipment Certification Official authorization letter from IKEA of Sweden AB appointing TUV Rheinland (Shanghai) Co., Ltd. as its agent for equipment certification processes, including FCC and Industry Canada compliance for self-ballasted LED lamps.
	IKEA LED2410R5NA GU10 LED Lamp Marking and Technical Details Comprehensive guide detailing the marking specifications, safety warnings, and technical data for the IKEA LED2410R5NA GU10 LED lamp, including QR code and manufacturing location information.