TTU-1230™ Value-Driven Asset Tracker

Built for Flexibility, with Extensive I/O Capabilities and Excellent Field Reliability

The TTU-1230™ value-based design asset tracking device is built for applications requiring only the essential features and includes a rechargeable battery pack, making it an ideal solution for assets that are tethered, but may sit disconnected for periods of time. The captive I/O harness enables a broad array of use cases.

Key Features

  • PEG™ Behavioral Scripting (8 Bit Support)
  • Extensive Power Management Features
  • Large (5.2 Ah) Rechargeable Battery
  • Weatherproof (IP66)
  • 500 Message Cycles on Fully Charged Battery

Market Applications

  • Asset Tracking
  • Trailer Tracking
  • IIoT Remote Monitoring

Connectivity & Services

Networks

LTE Cat 1, HSPA/UMTS

Software/Services

CalAmp Telematics Cloud (CTC) API, Device Management (PULS™)

Related Products

  • TTU-730
  • TTU-2830

Technical Specifications

Cellular/Network

VariantCellular Bands
North American Variant ILTE Cat 1, HSPA/UMTS (1900 (B2)/AWS 1700 (B4)/850 (B5)/700 (B12) MHz, 850 (V)/1900 (II) MHz)
North American Variant IILTE Cat 1 (AWS 1700 (B4)/700 (B13) MHz)
Americas VariantHSPA/UMTS, GSM/GPRS (850 (V)/1900 (II) MHz, 850/1900 MHz)
Global VariantGSM/GPRS (850/900/1800/1900 MHz)

Data Support

SMS, UDP Packet Data

Satellite Location (GNSS)

Constellation SupportHybrid GPS, SBAS Engine (WAAS, EGNOS, MSAS)
Channels31 Channel
Tracking Sensitivity-162 dBm
Acquisition Sensitivity-156 dBm (hot start)
-148 dBm (cold start)
Location Accuracy~2.0m CEP Open Sky (SBAS 24 hours static)
Location Update Rate1 Hz

Comprehensive I/O

Ignition Inputs1 fixed bias
Digital Inputs2 (high/low bias selectable 0-32 VDC)
Digital Outputs3 (open collector relay 150mA)
AccelerometerBuilt-in, triple-axis (motion sensing, tilt detection)
Serial Interface1 TTL port multiplexed on input 2, output 2
Status LEDs2 (GPS, cellular)

Electrical

Operating Voltage12/24 VDC Vehicle Systems
9-32 VDC (start-up, operating)
7-32 VDC (momentary)
Power ConsumptionTypical 1mA @ 12V (deep sleep)
Typical 50mA @ 12V (GPS tracking and cell idle)

Battery Pack

Battery CapacityUp to 5200 mAh
Battery TechnologyLithium-Ion
Charging Temperature0° to +45° C

Environmental

Temperature-30° to +60° C (connected to primary power)
-20° to +60° C (operating on internal battery)
-20° to +25° C ≤ 6 months (long term storage with battery)
Humidity95% RH @ 50° C non-condensing
Shock and VibrationU.S. Military Standards 202G, SAEJ1455
ESDIEC 61000-4-2 (4KV test)
Ingress Protection RatingIP66

Physical/Design

Dimensions3.15 x 4.33 x 1.59" (80 x 110 x 40 mm)
Weight19.5 oz. (553g) (w/ 5200mAh battery and standard harness)

Connectors/SIM Access

GPS AntennaInternal
Cellular AntennaInternal
SIM AccessInternal (2FF SIM)

Certifications

FCC, IC, PTCRB, RoHS

Cloud/Software Services

PULS™: Monitor, manage, upgrade firmware, configure and troubleshoot devices remotely

CTC: Device data stream via RESTful APIs

Edge Intelligence

PEG™ Behavioral scripting (8-bit support)

Compliance Information

CALIFORNIA PROPOSITION 65 WARNING: This product can expose you to chemicals including Carbon black and Nickel, which are known to the State of California to cause cancer, and including Bisphenol A and 1,3-Butadiene, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

PDF preview unavailable. Download the PDF instead.

TTU-1230 GPL Ghostscript 9.55.0 Adobe InDesign 15.1 (Macintosh)

Related Documents

Preview CalAmp TTU-4530/TTU-4531 Hardware and Installation Guide
This guide provides essential information for the setup and installation of CalAmp's TTU-4530 and TTU-4531 mobile tracking units, covering hardware, system architecture, and installation procedures for fleet management.
Preview CalAmp TTU-2830™ Hardware and Installation Guide
A comprehensive guide for the installation and setup of the CalAmp TTU-2830™ vehicle tracking device. It covers hardware specifications, system overview, installation procedures, and licensing information.
Preview CalAmp LMU-330™ Vehicle Tracker: Features, Specifications, and Applications
Discover the CalAmp LMU-330™, a robust, compact, and economical vehicle tracking device for stolen vehicle recovery, auto rental, and track & trace applications. Features HSPA/GPRS, high-sensitivity GPS, and essential I/O. View technical specifications and product options.
Preview CalAmp LMU-1230™ Vehicle Tracker: Features, Specs, and Applications
Discover the CalAmp LMU-1230™, a cost-effective, compact vehicle tracking device with essential I/O capabilities. Learn about its features, technical specifications, market applications, and software integration for stolen vehicle recovery, auto rental monitoring, and automotive track and trace.
Preview CalAmp LMU-5541 Hardware and Installation Guide
Comprehensive guide for installing and configuring the CalAmp LMU-5541TM vehicle tracking and location messaging unit, covering hardware, setup, and firmware.
Preview CalAmp LMU-3x40 Training Guide
A comprehensive training guide for the CalAmp LMU-3x40 Telematics EdgeCore platform, covering its features, hardware, setup, scripting, and operational procedures for vehicle tracking and fleet management.
Preview CalAmp Telematics Cloud Data Pump Messages Version 2 - Messaging Guide
This guide details the CalAmp Telematics Cloud Data Pump API services and message formats, including AVL Events, Telematics Events, and data structures for fleet and construction equipment. Learn about message types, event codes, and data parameters for efficient telematics data integration.
Preview CalAmp Telematics Cloud DM-CTC 3.15 Release Notes
Details the updates and improvements in CalAmp Telematics Cloud version DM-CTC 3.15, including performance enhancements, new jPOD parameter support, and improved job pre-queuing functionality. Provides contact information for technical support.