Fender Champion 100 Guitar Amplifier

Features and Controls

The Champion 100 amplifier features two channels, a variety of built-in effects, and a user-friendly interface.

• INPUT: Connect your guitar here.
• FTSW (Footswitch): Connect the included footswitch for remote channel selection and effects on/off switching.
• VOLUME (1/2): Adjusts the channel volume level.
• TREBLE/MID/BASS: Adjusts the channel's tonal characteristics.
• FX LEVEL: Adjusts the level of the selected channel's effects.
• FX SELECT: Selects the channel's effects, including: Effects OFF, Touch-Wah, Flange, Vibratone (Slow/Fast), Chorus, Chorus + Delay, Chorus + Reverb, Delay Slapback, Delay Long, Tremolo (Slow/Fast), Reverb + Delay, Reverb Room, Reverb Hall, Reverb Spring.
• TAP: Use this button to tap in a custom delay time or modulation rate by pressing it rhythmically in sync with the desired interval. The TAP LED blinks at the current delay/modulation interval. Pressing the TAP button once sets the interval to its maximum value.
• CH SELECT: Switches between amplifier channels, indicated by the channel indicator light. This function is overridden by the footswitch's CH SELECT switch when connected. Channel 1 provides a clean tone based on Fender Blackface™ amplifiers.
• GAIN: Adjusts the channel's distortion level. Use with the VOLUME knob to set the overall loudness.
• CHANNEL INDICATOR: Illuminates when channel 2 is selected.
• VOICE: Selects the amplifier voice type for channel 2, offering various classic Fender tones like Tweed Bassman®, Tweed Deluxe™, Tweed Champ®, '65 Twin-Amp™, '65 Deluxe™, '65 Princeton®, Super-Sonic™, and various British and metal voicings.
• AUX: Connect a media player for accompaniment. Adjust the input level using the media player's volume control.
• PHONES: Connect headphones here to enjoy the amplifier's effects in stereo. The amplifier speakers mute automatically. This output can also be used for recording or sound reinforcement.
• PRE OUT/PWR IN: For an effects loop, connect PRE OUT to the input of an external effects device and PWR IN to the output of that device.
• PWR: Illuminates when the unit is switched on.

Rear Panel

• POWER: Switch to the "ON" position to turn the unit on and "OFF" to turn it off.
• INPUT POWER: Connect the included power cord to a grounded outlet in accordance with the voltage and frequency ratings specified on the rear panel of your amplifier.

Specifications

• TYPE: PR 2434
• POWER REQUIREMENTS: 310W
• INPUT IMPEDANCE: >1MΩ
• POWER OUTPUT: 100W RMS into 8Ω @ 5% THD
• SPEAKERS: Two 12", 16Ω Fender Special Design (P/N 0099529000)
• FOOT SWITCH: 2-button (P/N 0097298000) included
• DIMENSIONS: Height: 19 in (48.5 cm), Width: 26 in (66 cm), Depth: 10.25 in (26 cm)
• WEIGHT: 40 lb (18 kg)

Important Safety Instructions

Please read and follow all safety instructions provided in the manual to ensure safe operation and prevent hazards such as electric shock or fire.

• Always read instructions.
• Keep instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use near water.
• Clean only with a dry cloth.
• Do not block ventilation openings.
• Do not install near heat sources.
• Do not defeat the safety purpose of polarized or grounding-type plugs.
• Protect the power cord from being walked on or pinched.
• Use only manufacturer-specified attachments/accessories.
• Use only with specified carts, stands, tripods, brackets, or tables.
• Unplug during lightning storms or when unused for long periods.
• Refer servicing to qualified personnel.
• To disconnect completely, unplug the power cord from the AC receptacle.
• The mains plug shall remain readily operable.
• WARNING: Do not expose to rain or moisture.
• Do not expose to dripping or splashing; do not place liquid-filled objects on the equipment.
• Maintain at least 6 inches (15.25 cm) of unobstructed air space behind the unit for proper ventilation.
• CAUTION: For rack-mounted amplifiers, keep wiring away from sides and allow unit to cool before removal.
• Amplifiers, speaker systems, and headphones can produce high sound pressure levels that may cause hearing damage. Use care when setting volume levels.
• FCC Compliance Notice: This equipment has been tested and complies with FCC rules.
• WARNING: Protect batteries from excessive heat. Replace batteries only with the same or equivalent type.
• CAUTION: Unplug and allow unit to cool before touching/replacing vacuum tubes.
• WARNING: Provide and disconnect grounding connections properly.
• Class I equipment must be connected to a MAINS socket outlet with protective earthing.
• WARNING: Use only the provided AC/DC adapter.