EverStart Maxx BC4WE 4 Amp Waterproof Battery Charger/Maintainer

Product Overview

This manual provides instructions for the safe operation and maintenance of the EverStart Maxx BC4WE 4 Amp Waterproof Battery Charger/Maintainer. It is designed for charging and maintaining 12-volt lead-acid batteries.

Key Features:

• AC Power Cord
• Charging/Charged LED Indicator
• Reverse Polarity LED Indicator
• Battery Clamps
• Double Barrel Charger Connector
• Battery Terminal Rings
• Magnetic Discs
• Mounting Bracket
• Hanging Hook

Important Safety Instructions

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

CAUTION (without safety alert symbol): Used without the safety alert symbol indicates potentially hazardous situation which, if not avoided, may result in property damage.

General Safety Warnings and Instructions:

• Keep children away. This is not a toy.
• Store indoors in a dry, locked-up place, out of reach of children.
• Unplug the battery charger when not in use.
• Never operate the charger in a closed area or restrict ventilation.
• Do not operate the battery charger near flammable liquids or in gaseous or explosive atmospheres.
• Do not operate if the unit has been damaged.
• Never attempt to charge non-rechargeable batteries.
• Never attempt to charge a frozen battery.
• Do not charge the battery while the engine is operating.
• Keep away from fan blades, belts, pulleys, and other moving engine parts.
• Always wear protective eyewear when working with batteries.
• Remove personal metal items like rings, bracelets, necklaces, and watches when working with batteries.
• Keep fresh water and soap nearby in case of accidental contact with battery acid.

Specific Safety Instructions for Power Cords:

• Do not abuse the cord. Pull by the plug, not the cord, when unplugging.
• Keep cord from heat, oil, and sharp edges.
• Ensure extension cords are properly rated and in good condition.
• The unit has a polarized plug; do not defeat this safety feature.

Specific Safety Instructions for Battery Chargers:

• This unit is for household use only.
• Do not use accessories or attachments not recommended by the manufacturer.
• Stay alert and use common sense when operating.
• WARNING - Burst Hazard: Use only for charging/boosting 12-volt lead-acid batteries.
• WARNING - Risk of Explosive Gases: Batteries generate explosive gases. Work in a well-ventilated area. Keep sparks and flames away.
• If used in a garage, the unit MUST be placed not less than 18 inches above the floor.
• This unit is not for use by children and should only be operated by adults.

Specific Safety Instructions for Use in Wet Environments:

• The unit is rated IP67 (dust-proof and waterproof).
• Do not submerge the unit in water deeper than 1 meter for longer than 30 minutes.
• Do not submerge the unit if the cord insulation is not intact.
• Do not allow clamps to be exposed to the elements for long periods or submerge them.

First Aid:

• Skin: Rinse immediately with water, then wash thoroughly with soap and water. Seek medical attention if irritation occurs.
• Eyes: Flush eyes immediately with water for at least 15 minutes and seek immediate medical attention.

Preparing to Charge

1. Ensure the area around the battery is well-ventilated.
2. Remove the battery from confined spaces before charging.
3. If removing the battery, disconnect the grounded terminal first. Turn off all vehicle accessories.
4. Clean battery terminals.
5. Check battery acid levels and add distilled water if necessary (follow manufacturer's instructions).
6. Follow battery manufacturer's specific precautions.
7. Determine battery voltage (unit is for 12-volt batteries only).

Charger Location:

• Locate the charger as far from the battery as cables permit.
• Never place the charger directly above the battery.
• Do not set a battery on top of the charger.
• Never allow battery acid to drip on the charger.
• Charge at temperatures between 41°F and 104°F (5°C and 40°C).

Connection Precautions:

• Never allow clamps or ring terminals to touch each other.
• Attach clamps/terminals as indicated in the appropriate section.

Charging a Battery Installed in a Vehicle:

1. Position cords to reduce risk of damage.
2. Stay clear of moving engine parts.
3. Check battery post polarity (Positive/POS/+ usually larger diameter than Negative/NEG/-).
4. Determine which post is grounded to the chassis.
5. For negative-grounded vehicles: Connect POSITIVE (RED) clamp to POSITIVE battery post. Connect NEGATIVE (BLACK) clamp to vehicle chassis or engine block away from the battery.
6. For positive-grounded vehicles: Connect NEGATIVE (BLACK) clamp to NEGATIVE battery post. Connect POSITIVE (RED) clamp to vehicle chassis or engine block away from the battery.
7. Connect to a heavy gauge metal part of the frame or engine block.
8. Refer to operating instructions for charging time.
9. When disconnecting: disconnect AC power, then remove NEGATIVE clamp, then POSITIVE clamp.

Charging a Battery Removed from a Vehicle:

1. Check battery post polarity.
2. Attach a 24-inch (minimum) AWG #6 insulated battery cable to the Negative battery post.
3. Connect the POSITIVE (RED) charger clamp to the POSITIVE battery post.
4. Connect the NEGATIVE (BLACK) charger clamp to the free end of the battery cable connected to the negative terminal.
5. Stand back from the battery and do not face it when making the final connection.
6. When disconnecting: disconnect AC power, then remove NEGATIVE clamp, then POSITIVE clamp.

Operating Instructions

Charging Using Battery Clips:

1. Ensure the charger is unplugged and not connected to a battery.
2. Connect the battery clips cable to the unit's Double Barrel Charger Connector.
3. Connect the battery clips to the battery and position the unit as far away as possible.
4. Plug the AC plug into a 120V 60Hz outlet. The Charging/Charged LED will flash green.
5. If the Reverse Polarity LED lights, unplug, remove, and reconnect clamps properly.
6. If the Charging/Charged LED does not light, check connections and AC outlet. If connections are good, the battery may be faulty.
7. When the Charging/Charged LED lights solid, charging is complete.
8. Disconnect in reverse order: unplug AC, remove clamp from chassis (if applicable), then remove clamp from battery.

Connecting and Charging with Terminal Rings:

1. Ensure the charger is unplugged and not connected to a battery.
2. Remove nuts from battery post connectors.
3. Position the RED terminal ring on the POSITIVE battery post connector.
4. Position the BLACK terminal ring on the NEGATIVE battery post connector. Replace nuts.
5. Connect the Terminal Rings connector to the unit's Double Barrel Charger Connector.
6. Plug the AC plug into a 120V 60Hz outlet. The Charging/Charged LED will flash green.
7. If the Reverse Polarity LED lights, disconnect, remove, and reconnect terminal rings properly.
8. If the Charging/Charged LED does not light, check connections and AC outlet. If connections are good, the battery may be faulty.
9. When the Charging/Charged LED lights solid, charging is complete.
10. Disconnect in reverse order: unplug AC, then remove terminal rings from battery posts.

Care and Maintenance

Cleaning and Storage:

• Unplug the charger before cleaning or maintenance.
• Clean the unit casing and cords with a dry or slightly damp cloth.
• Store the unit in a clean, dry, cool place.
• Coil cords loosely for storage; do not wrap tightly or crimp.
• After each use, clean battery clips to remove battery fluid.
• Do not allow liquid into the charger.
• Do not open the unit; return to manufacturer for service.

Troubleshooting

Accessories

Recommended accessories may be available from the manufacturer. Contact 1-877-571-2391 for assistance.

WARNING: Use of unrecommended accessories may be hazardous.

Service Information

For technical advice, repair, or genuine factory replacement parts, contact the manufacturer at 1-877-571-2391.

Two-Year Limited Warranty

The manufacturer warrants this product against defects in materials and workmanship for TWO (2) YEARS from the date of retail purchase by the original end-user purchaser. This warranty does not cover accessories, bulbs, fuses, batteries, normal wear and tear, accidents, shipping damage, alterations, unauthorized use or repair, neglect, misuse, abuse, or failure to follow care and maintenance instructions.

Appendix

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

If the equipment causes harmful interference, the user is encouraged to try to correct it by:

• Reorienting or relocating the receiving antenna.
• Increasing the separation between the equipment and receiver.
• Connecting the equipment to an outlet on a different circuit than the receiver.
• Consulting the dealer or an experienced radio/TV technician.

Changes or modifications not approved by the party responsible for compliance could void the user's authority to operate the equipment.

Specifications

• Input: 120V AC, 60Hz, 0.9A
• Output: 12V DC, 4A

Imported by Baccus Global LLC, 621 NW 53rd St., Suite 450, Boca Raton, FL 33487

Website: www.Baccusglobal.com

Customer Service: 1-877-571-2391

RD032620

Resumen en Español (Summary in Spanish)

Cargador/Mantenedor de Batería EverStart Maxx BC4WE 4 Amp Impermeable

Este manual proporciona instrucciones para la operación y mantenimiento seguros del Cargador/Mantenedor de Batería EverStart Maxx BC4WE de 4 Amperios. Está diseñado para cargar y mantener baterías de plomo-ácido de 12 voltios.

Instrucciones de Seguridad Importantes: Se incluyen advertencias detalladas sobre peligros eléctricos, gases explosivos y el uso seguro del producto. Se recomienda leer y seguir todas las instrucciones.

Preparación para Cargar: Incluye pasos para la ventilación, limpieza de terminales y conexión segura a la batería, ya sea instalada en un vehículo o retirada.

Instrucciones de Operación: Detalla cómo cargar usando pinzas de batería o anillos terminales, incluyendo la indicación de los LEDs de estado y la solución de problemas de polaridad.

Cuidado y Mantenimiento: Se ofrecen consejos sobre limpieza y almacenamiento para asegurar la longevidad del producto.

Detección de Problemas: Una tabla ayuda a diagnosticar problemas comunes como la unidad que no carga.

Garantía Limitada de Dos Años: Cubre defectos de materiales y mano de obra por dos años, con exclusiones especificadas.

Especificaciones: Entrada 120V AC, 60Hz, 0.9A; Salida 12V DC, 4A.

Contacto: Baccus Global LLC, 1-877-571-2391.