Redmi Note 10 5G

Welcome

Thank you for choosing the Redmi Note 10 5G. To turn on the device, long press the power button. Follow the on-screen instructions to configure your device.

For more information, visit the official website: www.mi.com/global/service/userguide

MIUI

The Redmi Note 10 5G comes pre-installed with MIUI, Xiaomi's customized Android-based OS. MIUI offers frequent updates and user-friendly features, developed based on feedback from over 200 million active users worldwide. For more information, please visit en.miui.com.

SIM Card Tray

The SIM card tray supports two Nano-SIM cards and one Micro SD card.

About Dual SIM:

• Supports Dual SIM cards with no carrier restrictions, enabling dual 5G connectivity.
• Features Dual Nano-SIM card slots, allowing either card to be set as the primary card.
• Supports Dual SIM 5G/4G/3G/2G.
• Supports Dual SIM VoLTE.

Note: 5G connection depends on country, carrier, and user environment. VoLTE depends on the carrier's network and service deployment.

Please do not insert non-standard SIM cards into the SIM card slot, as they may damage the slot.

WARNING: Do not disassemble this device.

WEEE (Waste Electrical and Electronic Equipment)

Special precautions must be taken for the safe disposal of this product. The WEEE symbol ♻️ indicates that this product may not be discarded with other household waste in the EU. To prevent harm to the environment or human health from inappropriate waste disposal, and to promote sustainable reuse of material resources, please recycle responsibly.

To safely recycle your device, please use return and collection systems or contact the retailer where the device was originally purchased.

For the Environmental Declaration, please refer to: www.mi.com/en/about/environment

Important Safety Information

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS.

To prevent possible hearing damage, do not listen at high volume levels for long periods.

Additional safety information and precautions can be accessed at: www.mi.com/en/certification

General Safety Guidelines:

• Use of unauthorized cables, power adapters, or batteries can cause fire, explosion, or other risks. Always use authorized accessories compatible with your device.
• The device's operating temperature range is 0°C to 40°C. Using it outside this range may cause damage.
• If your device has a built-in battery, do not attempt to replace it yourself to avoid damage.
• Charge the device only with the included or authorized cable and power adapter. Using other adapters may cause fire, electric shock, or damage.
• After charging, disconnect the adapter from both the device and the power outlet. Do not charge for more than 12 hours.
• Batteries must be recycled or disposed of separately from household waste. Mishandling can cause fire or explosion. Dispose of or recycle the device, battery, and accessories according to local regulations.
• Do not disassemble, hit, crush, or burn the battery. Stop using it immediately if deformed or damaged.
• Do not short-circuit the battery, as this may cause overheating, burns, or injury.
• Do not place the battery in high-temperature environments; overheating may cause explosion.
• User shall not remove or alter the battery. Battery removal or repair must be done by an authorized repair center.
• Keep your device dry.
• Do not attempt self-repair. Contact Mi customer support or an authorized repair center if the device malfunctions.
• Connect other devices according to their instruction manuals. Do not connect incompatible devices.
• For AC/DC adapters, the socket-outlet should be installed near the equipment and be easily accessible.

Safety Precautions

• Observe all applicable laws and rules restricting mobile phone use in specific situations and environments.
• Do not use your phone at petrol stations or in any explosive atmosphere (e.g., fueling areas, below decks on boats, fuel/chemical transfer/storage facilities, or areas with chemicals, dust, or metal powders). Obey signs to turn off wireless devices. Turn off your phone in blasting areas or areas requiring "two-way radios" or "electronic devices" to be turned off.
• Do not use your phone in hospitals (operating rooms, emergency rooms, intensive care units). Always comply with hospital rules. If you have a medical device (e.g., pacemaker), consult your doctor and the manufacturer. Maintain a minimum distance of 15 cm between your phone and a pacemaker. Use the phone on the ear opposite your pacemaker and avoid carrying it in a breast pocket. To avoid interference with medical equipment, do not use your phone near hearing aids, cochlear implants, or similar devices.
• Observe all aircraft safety regulations and turn off your phone on board aircraft when required.
• When driving, use your phone in accordance with traffic laws and regulations.
• To avoid being struck by lightning, do not use your phone outdoors during thunderstorms.
• Do not make calls while charging.
• Do not use your phone in places with high humidity (e.g., bathrooms), as this may result in electric shock, injury, fire, and charger damage.

Security Statement

Please update your phone's operating system using the built-in software update feature or visit an authorized service outlet. Updating software through other means may damage the device or result in data loss or security issues.

EU Regulations

RED Declaration of Conformity

Xiaomi Communications Co., Ltd. declares that this GSM / GPRS / EDGE / UMTS / LTE / 5G NR Digital Mobile Phone with Bluetooth and Wi-Fi (Model: M2103K19G) is in compliance with the essential requirements and other relevant provisions of the RE Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: www.mi.com/en/certification.

The device displays the CE mark.

RF Exposure Information (SAR)

This device complies with Specific Absorption Rate (SAR) limits for general population/uncontrolled exposure (Localized 10-gram SAR for head and trunk, limit: 2.0W/kg) as specified in Council Recommendation 1999/519/EC, ICNIRP Guidelines, and RED (Directive 2014/53/EU).

During SAR testing, the device was set to transmit at its highest certified power level in all tested frequency bands and placed in positions simulating RF exposure during use against the head with no separation and near the body with a separation of 5 mm.

SAR compliance for body operation is based on a separation distance of 5 mm between the unit and the human body. This device should be carried at least 5 mm away from the body to ensure RF exposure levels are compliant. When attaching the device near the body, use a belt clip or holster that does not contain metallic components and maintains at least 5 mm separation. RF exposure compliance was not tested or certified with any accessory containing metal worn on the body, and use of such accessories should be avoided.

Certification Information (Highest SAR)

This radio communication equipment has a specific absorption rate (SAR) of 0.539 W/kg, which complies with the Safety Standard for the Use of Radio communication Equipment on Human Health announced by the National Telecommunications Commission.

Legal Information

This device may be operated in all member states of the EU. Observe national and local regulations where the device is used.

Restrictions in the 5150 to 5350 MHz frequency range: This device is restricted to indoor use only in the following countries:

Restrictions in the 2.4 GHz band:

Norway: This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-Ålesund.

Receiver Category & Frequency Bands

Ensure the power adapter used meets the requirements of Clause 6.4.5 in IEC/EN 62368-1 and has been tested and approved according to national or local standards.

Frequency Bands and Power (EU areas only):

• GSM 900: 35.5 dBm
• GSM 1800: 32.5 dBm
• WCDMA 900/2100: 25.7 dBm
• LTE bands 1/3/7/8/20/28/38/40: 25.7 dBm
• 5G NR bands n1/n3/n7/n8/n20/n28/n38/n40/n41: 26 dBm
• 5G NR bands n77/n78: 29 dBm
• Bluetooth: 20 dBm
• Wi-Fi 2.4 GHz band: 20 dBm
• Wi-Fi 5 GHz: 5150 to 5250MHz: 23 dBm, 5250 to 5350 MHz: 23 dBm, 5470 to 5725 MHz: 23 dBm, 5725 to 5850 MHz: 14 dBm
• NFC: 13.56 MHz < 42 dBuA/m at 10m

FCC Regulations

This mobile phone complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Information (SAR) - FCC

This device meets the government's requirements for exposure to radio waves. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy. The exposure standard for wireless devices employs a unit of measurement known as Specific Absorption Rate, or SAR.

The SAR limit set by the FCC is 1.6 W/Kg. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and positions the device a minimum of 1.0 cm from the body. RF exposure compliance with any body-worn accessory that contains metal was not tested and certified, and use of such accessories should be avoided. Any accessory used with this device for body-worn operation must keep the device a minimum of 1.0 cm away from the body.

FCC Notes & E-label

FCC Note: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.

E-label: This device has an electronic label for certification information. To access it, go to Settings > About phone > Certification, or open Settings and type "Certification" into the search bar.

Model: M2103K19G. The number 2103 indicates that this product was launched after March 2021.

NBTC: The telecommunication equipment and this device conform to the requirements of NBTC.

Disclaimer

This user guide is published by Xiaomi or its local affiliated company. Improvements and changes to this user guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment may be made by Xiaomi at any time and without notice. Such changes will, however, be incorporated into new online editions of the user guide (please see details at www.mi.com/global/service/userguide). All illustrations are for illustration purposes only and may not accurately depict the actual device.

Materials & Manufacturer

This smartphone is designed with Corning® Gorilla® Glass 3.

Manufacturer: Xiaomi Communications Co., Ltd.

Manufacturer postal address: #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China, 100085.

Brand: Redmi

Model: M2103K19G

© Xiaomi Inc. All rights reserved.