Key Points of Use

1. Detect the placement of the expander, as far as possible to avoid the corner.
2. Check whether the antenna of the expander is parallel to the antenna of the upper router. It is recommended that the antenna of the router and the expander be placed upward as far as possible.
3. The connection signal near the expander is tested again to avoid network speed attenuation caused by too far distance from the expander.
4. If the above conditions are excluded, the extender can be reset and re-extended.

Troubleshooting Steps

1. Check the Settings of the upper-layer router.
2. Whether the location is too far away from the upper outer or there are many partitions.