Vision™ OPLC™ Technical Specifications

V1040-T20B

V1040 OPLCs are programmable logic controllers that comprise a built-in operating panel containing a 10.4" Color Touchscreen. The V1040 offers function keys along with a virtual alpha-numeric keyboard which is automatically displayed when the application requires the operator to enter data. Additional documentation can be found on the Unitronics' Setup CD and in the Technical Library at www.unitronics.com.

Technical Specifications

Power Supply

Input voltage12 or 24VDC
Permissible range10.2-28.8VDC
Max. current consumption840mA@12V
420mA@24V

Battery

Back-up7 years typical at 25°C, battery back-up for RTC and system data, including variable data.
ReplaceableYes, without opening the controller.

Graphic Display Screen

LCD TypeTFT
Illumination backlightWhite LED
Display resolution, pixels800x600 (SVGA)
Viewing area10.4"
Colors65,536 (16-bit)
TouchscreenResistive, analog
'Touch' indicationVia buzzer
Screen brightnessVia software (Store value to SI 9).
KeypadDisplays virtual keyboard when the application requires data entry.

Note 1: The LCD screen may have a single pixel that is permanently either black or white.

Keypad

Number of keys9 programmable function keys
Key typeMetal dome, sealed membrane switch

Program

Memory sizeApplication Logic – 2MB, Images – 80MB, Fonts – 1MB
Operand type
Memory Bits8192MBBit (coil)
Memory Integers4096MI16-bit
Long Integers512ML32-bit
Double Word256DW32-bit unsigned
Memory Floats64MF32-bit
Timers384T32-bit
Counters32C16-bit
Data Tables120K dynamic RAM data (recipe parameters, datalogs, etc.)
Up to 256K Flash data
HMI displaysUp to 1024
Program scan time9 µsec per 1K of typical application

Removable Memory

Micro-SD cardCompatible with fast micro-SD cards; store datalogs, Alarms, Trends, Data Tables, backup Ladder, HMI, and OS. See Note 2

Note 2: User must format via Unitronics SD tools utility.

Communication

RS232

Galvanic isolationYes
Voltage limits±20VDC absolute maximum
Baud rate range300 to 115200 bps
Cable lengthUp to 15m (50')

RS485

Galvanic isolationYes
Voltage limits-7 to +12VDC differential maximum
Baud rate range300 to 115200 bps
NodesUp to 32
Cable typeShielded twisted pair, in compliance with EIA RS485
Cable length1200m maximum (4000')

USB

Port typeMini-B
Galvanic isolationNo
SpecificationUSB 2.0 compliant; full speed
Baud rate range300 to 115200 bps
CableUSB 2.0 compliant; up to 3m

CANbus port

Nodes1 CANopen
127 Unitronics' CANbus protocols
Power requirements24VDC (±4%), 40mA max. per unit. See Note 5

Note 3: The standard for each port is set to either RS232/RS485 according to DIP switch settings. Refer to the Installation Guide.

Note 4: The USB port may be used for programming, OS download, and PC access. Note that COM port 1 function is suspended when this port is physically connected to a PC.

Note 5: Supports both 12 and 24VDC CANbus power supply, (±4%), 40mA maximum per unit. Note that if 12 VDC is used, the maximum cable length is 150 meters.

I/Os

Snap-in I/O modulesNumber of I/Os and types vary according to module. Supports up to 1024 digital, high-speed, and analog I/Os.
Expansion modulesLocal adapter (P.N. EX-A1), via I/O Expansion Port. Integrate up to 8 I/O Expansion Modules comprising up to 128 additional I/Os.
Remote adapter (P.N. EX-RC1), via CANbus port. Connect up to 60 adapters; connect up to 8 I/O expansion modules to each adapter.
Exp. port isolationGalvanic

Dimensions

Size289x244.5x59.1mm (11.37"x9.62"x2.32"). See Note 6
Weight1.5kg (52.9 oz)

Note 6: For exact dimensions, refer to the product's Installation Guide.

Mounting

Panel-mountingVia brackets

Environment

Inside cabinetIP20 / NEMA1 (case)
Panel mountedIP65 / NEMA4X (front panel)
Operational temperature0 to 50°C (32 to 122°F)
Storage temperature-20 to 60°C (-4 to 140°F)
Relative Humidity (RH)5% to 95% (non-condensing)

Notes:

  • The standard for each port is set to either RS232/RS485 according to DIP switch settings. Refer to the Installation Guide.
  • The USB port may be used for programming, OS download, and PC access. Note that COM port 1 function is suspended when this port is physically connected to a PC.
  • Supports both 12 and 24VDC CANbus power supply, (±4%), 40mA maximum per unit. Note that if 12 VDC is used, the maximum cable length is 150 meters.
  • For cable lengths over 500 meters, contact technical support.

Optional port: User may install a single Ethernet port, or an RS232/RS485 port. Available by separate order.

The information in this document reflects products at the date of printing. Unitronics reserves the right, subject to all applicable laws, at any time, at its sole discretion, and without notice, to discontinue or change the features, designs, materials and other specifications of its products, and to either permanently or temporarily withdraw any of the forgoing from the market.

All information in this document is provided "as is" without warranty of any kind, either expressed or implied, including but not limited to any implied warranties of merchantability, fitness for a particular purpose, or non-infringement. Unitronics assumes no responsibility for errors or omissions in the information presented in this document. In no event shall Unitronics be liable for any special, incidental, indirect or consequential damages of any kind, or any damages whatsoever arising out of or in connection with the use or performance of this information.

The tradenames, trademarks, logos and service marks presented in this document, including their design, are the property of Unitronics (1989) (R"G) Ltd. or other third parties and you are not permitted to use them without the prior written consent of Unitronics or such third party as may own them.

PDF preview unavailable. Download the PDF instead.

V1040-T20B TECH-SPEC 11-10 Microsoft Office Word Jaws PDF Creator, Word macro v3.6.2

Related Documents

Preview Unitronics V1040-T20B Vision OPLC Installation Guide
Comprehensive installation guide for the Unitronics V1040-T20B Vision OPLC, covering general description, communications, I/O options, software, mounting, wiring, power supply, and CANbus.
Preview Unitronics V1040-T20B OPLC User and Installation Guide
This guide provides essential information for Unitronics V1040-T20B OPLCs, covering general description, communications, I/O options, programming software, installation procedures, wiring, power supply, technical specifications, and UL compliance for hazardous and ordinary locations.
Preview Unitronics Vision Series Colour Graphic Touch OPLCs - Technical Specifications
Detailed specifications for Unitronics Vision Series Advanced Colour, Graphic, and Touch OPLCs, including HMI and PLC features, model comparisons, and Snap-In I/O modules.
Preview Unitronics PLC + HMI All-in-One Controllers and Software Overview
Explore the comprehensive range of Unitronics' PLC+HMI All-in-One automation solutions, including UniStream, Vision, Samba, and Jazz series, alongside the powerful UniLogic programming software. Discover features, specifications, and applications for industrial automation.
Preview Unitronics PLC + HMI All-in-One Solutions: Vision, Samba, Jazz
Explore Unitronics' powerful PLC + HMI All-in-One automation solutions. Discover the Vision, Samba, and Jazz series, featuring intuitive software, expert support, and a complete range of PLCs for diverse industrial applications.
Preview Unitronics PLC and Accessories Catalog: Integrated Automation Solutions
Explore Unitronics' comprehensive range of PLCs, HMIs, Motion Control, UniLogic software, and UniCloud IIoT platform. Discover solutions for industrial automation, designed for efficiency, reliability, and ease of use.
Preview Unitronics PLC и HMI: Полный каталог продукции для автоматизации
Обзор продукции Unitronics, включая серии UniStream, Vision, Samba и Jazz. Узнайте о программируемых логических контроллерах (ПЛК) и человеко-машинных интерфейсах (HMI), их возможностях, технических характеристиках и программном обеспечении UniLogic.
Preview Unitronics: Integrated Control and Automation Solutions
Explore Unitronics' comprehensive range of PLC+HMI controllers and Variable Frequency Drives (VFDs). Offering integrated solutions for industrial automation, Industry 4.0, and efficient control with user-friendly software and outstanding support.