Epson EB-7xx Series Multimedia Projector

Introduction

This guide provides essential information for setting up and operating your Epson EB-7xx series multimedia projector. It covers product contents, connections, basic operation, and interactive features.

Supported Models: EB-755F, EB-725Wi, EB-750F, EB-725W, EB-735Fi, EB-720.

Product Box Contents

The projector package typically includes:

• Projector unit
• Remote control
• Batteries for remote control
• Power cord
• Document CD-ROM
• Mounting bracket (for EB-735Fi/EB-725Wi models)
• Various cables (for EB-735Fi/EB-725Wi models)
• Warning sticker

Note: Bundled items may vary depending on the country or specific model.

Connecting a Device

Connect your video sources to the projector using the appropriate cables. The projector features multiple input ports:

• HDMI: Connect computers, Blu-ray players, or other HDMI-compatible devices. (Multiple HDMI ports available)
• Computer (VGA): Connect older computers or laptops.
• USB-B: For PC interactivity or firmware updates.
• Audio: Connect audio sources separately if needed.

The rear panel diagram shows connections for Computer, HDMI, and USB devices, along with audio and control ports.

Turning On the Projector

1. Connect the power cord to the projector and then to a wall outlet.
2. Connect your input source device (e.g., laptop) to the projector using the appropriate cable (HDMI, Computer, USB).
3. Press the [Power Button] button on the projector or remote control.

Indicator lights show the projector's status:

• On/Standby: [Power Indicator]
• Status: [Status Light]
• Laser: [Laser Light]
• Temp: [Temperature Indicator]

Initial Setting Wizard

Upon first startup, the projector may guide you through an initial setup wizard:

1. The projector will prompt you to select the input source using the [Source Search Button] or navigation keys.
2. The projected image will display setup options.
3. Use the remote control's navigation buttons ([Up Arrow], [Down Arrow], [Left Arrow], [Right Arrow]), [Menu Button], and [Set Button] to make selections and confirm settings.
4. The wizard helps configure basic settings for optimal viewing.

Home Screen

The Home Screen provides access to various functions and settings. It displays the projector name and allows selection of input sources such as HDMI, Computer, and LAN. Key features accessible from the Home Screen include:

• Whiteboard mode
• Split Screen
• Screen Sharing
• Connection Guide
• Settings menu

Adjusting the Image Shape and Projection Mode

You can adjust the projected image's shape and orientation:

Image Shape Adjustment

Use the projector's menu to correct keystone distortion:

• Navigate to the Keystone correction settings via the [Menu Button].
• Adjust V-Keystone (Vertical Keystone) and H-Keystone (Horizontal Keystone) using the [W Button]/[T Button] (or equivalent navigation).

Projection Mode

The projector supports various projection orientations (e.g., standard, rear, ceiling mount). Select the appropriate mode via the settings menu to match your installation.

Quick access buttons on the remote include [Aspect Button], [A/V Mute Button], [Split Button], [Freeze Button], and [Home Button].

Easy Interactive Function (EB-735Fi/EB-725Wi)

These models offer interactive capabilities, allowing you to use the projected surface as a digital whiteboard or annotate directly on screen.

Pen Operation

Use the included interactive pen (✍️) to write, draw, or control the cursor on the projected image. The pen requires batteries and interacts wirelessly with the projector.

Finger Touch Operation

For compatible models, you can use your fingers (?) to interact directly with the projected image, enabling touch gestures for control and input.

Drawing Modes

The projector supports different drawing and annotation modes:

Whiteboard Mode

Activate Whiteboard mode from the Home Screen to use the projector as a digital whiteboard. You can draw, write notes, and save content using the interactive pen or finger touch.

Annotation Mode

Annotation mode allows you to overlay drawings or notes onto the projected content from a connected source, such as a presentation or graph.

PC Interactivity

Enable PC Interactivity to control your computer from the projected screen using the interactive pen or touch.

To set up:

1. Ensure the projector is connected to your PC via USB-B.
2. Navigate through the projector's menu: [Pen/Touch] > [PC Interactivity] > [Pen Tracking Mode].
3. Configure settings like Pen Tracking Mode and Auto Adjust Pen Area.

Operating Modes:

• On Windows/Mac: Operates in [Pen Mode].
• On Ubuntu: Operates in [Mouse Mode].

For More Information

For detailed manuals, specifications, and support, visit the official Epson website:

epson.sn

You can also find documentation on the included Document CD-ROM.