Xblitz GX2 Car Holder User Manual

Introduction

Dear Customer, Thank you for purchasing the Xblitz GX2 car holder. Please read this user manual and safety tips carefully before use to avoid accidental damage or injury.

Intended Use

This device is a smartphone holder designed for use in cars. It features a built-in wireless charger, a smartphone mounting system, and automatic rotation. The holder is compatible with all smartphones supporting Qi wireless charging technology.

Included in the Package

• 1. Car holder
• 2. Air vent mount
• 3. Telescopic windscreen mount
• 4. USB type C cable
• 5. User manual

Product Description

The Xblitz GX2 features the following components:

• 1. Arms: These hold the smartphone securely.
• 2. Automatic rotation button: Used to change the phone's orientation.
• 3. Wireless charger: Built-in Qi-compatible charger.
• 4. LED light: Indicates charging status (White: Standby, Blue: Charging, Red: Abnormal charging).
• 5. Arm button: Opens the arms to insert or remove the phone.
• 6. USB-C port: For connecting the device to power.
• 7. Regulated base: Adjustable foot to optimize wireless charging alignment.

Installation

Follow these steps to install the Xblitz GX2 car holder:

A. Installing the holder:

1. Assemble the device parts by following the numbered illustrations.
2. Adjust the holder to your preferred position.
3. For air vent mounting: Push the button on the mounting clip to set the angle and secure the holder onto the air vent.

B. Mounting on an air vent or windshield:

The holder can be mounted using either the air vent mount or the telescopic windscreen mount.

C. Installing the smartphone in the holder:

1. The holder has an automatic rotation system.
2. To change the phone's position to vertical or horizontal, press the button on the back of the holder.
3. To switch from horizontal to vertical position, press the button on the right side of the holder, and the arms will automatically open.

D. Placing the smartphone in the holder:

1. The clamping arms automatically open when a smartphone is inserted and close to hold it securely.
2. To remove the smartphone: Press the button on the side of the holder to release the phone, and the arms will automatically open.

E. Connecting the holder to the power supply:

Connect the wireless charger to a car adapter using the provided USB-C cable. For faster charging, use a Qualcomm Quick Charging adapter.

Mode of Operation

1. The device features an electric system for opening and closing the arms that hold the smartphone.
2. To open the arms and insert/remove a smartphone, press one of the buttons on the side of the device.
3. The holder includes a built-in wireless charger and automatic rotation. When a Qi-compatible smartphone is placed in the holder, it will automatically start charging and switch to a horizontal position. For optimal charging performance, adjust the position of the regulated base so that the phone's charging coil aligns with the holder's coil.

Note: The producer does not guarantee compatibility with all smartphone models. The holder has a small capacitor that allows the arms to open for up to 20 minutes after the power supply is disconnected.

Charging Problems

If the charger is slow, stops charging, or the device overheats, consider the following potential issues:

• a. The phone case is too thick (recommended thickness: 2 mm).
• b. The built-in wireless charging coil in the holder does not align with the charging coil in the phone.
• c. A piece of metal or a magnet is obstructing the phone's inductive coil.
• d. The smartphone does not support wireless charging.
• e. The charging cable is not suitable or up to standard.

Safety Precautions and Notes

• 1. Keep the holder away from water and other liquids.
• 2. When cleaning the holder, ensure it is disconnected from the power supply.
• 3. Operating temperature range: -10°C to 45°C.
• 4. Damage caused by failure to comply with this manual will void the warranty.
• 5. Damage caused by improper use or failure to follow rules will void the warranty.
• 6. For safety reasons, do not modify or alter the product.
• 7. Regularly check the device for damage. Contact an authorized service center if damage is found.
• 8. Do not pour liquids onto the product; this risks permanent damage and fire.
• 9. Keep the device out of reach of children.
• 10. If the device overheats, unplug it and contact an authorized service center.
• 11. Do not connect the device to power sources with a voltage higher than recommended by the manufacturer (e.g., directly to a 220/230V socket). Failure to comply may result in damage or ignition.

Specifications

• Operating power: 5W, 7.5W, 10W, 15W max
• Input: 9V-1.67A, 5V-2A, 12V-1.5A
• Output: 9V-1.2A, 5V-1A, 12V-1.25A
• Input port: USB-C
• Body detector: Yes
• Protection: Over-voltage, over-current, overheating protection: Yes
• Sensor distance: ~6 cm
• Sensor type: Magnetic sensor
• Built-in capacitor: Yes (Faraday capacitor)
• Charging efficiency: 70%
• Adjustable base: Yes
• Operating temperature: -10°C to 45°C
• Weight: 140 g
• Dimensions: 120x66x22 mm
• Max. open size: 110 mm

Warranty and Claims

This product is covered by a 24-month warranty. Warranty conditions are available at: https://xblitz.pl/warranty/

Complaints should be submitted via the complaint form found at: http://reklamacje.kgktrade.pl/

For contact details and service address, visit: www.xblitz.pl

Specifications and contents of the kit are subject to change without notice. We apologize for any inconvenience.