Phase IV Engineering | Wireless Sensor Solutions for the Industrial IoTPhase IV Engineering | Wireless Sensor Solutions for the Industrial IoT
Instruction Manual for LEAP SENSORS models including: 53-100187-28 Leap Wireless Sensor System, 53-100187-28, Leap Wireless Sensor System, Wireless Sensor System, Sensor System
LEAP SYSTEM User’s Wiring Manual 2024 |1| LEAP WIRELESS SENSOR SYSTEM Wiring Guide for Leap Device Nodes # 53-100187-28-XX Revision 1.0
File Info : application/pdf, 15 Pages, 1.65MB
DocumentDocument2820 Wilderness Place, Unit C Boulder, Colorado, 80301 Tel: (303) 443 6611 LEAP WIRELESS SENSOR SYSTEM Wiring Guide for Leap Device Nodes Document# 53-100187-28-XX Revision 1.0 DISCLAIMER The content of this document is subject to change as a result of changes in process requirements and availability of resources LEAP SYSTEM |1| User's Wiring Manual 2024 Contents 1. About this Manual ................................................................................................................................... 4 1.1 Audience..........................................................................................................................................................4 2. Chart Industries Node .............................................................................................................................. 5 2.1 Sensor cable code............................................................................................................................................5 2.1.1 3-wire sensor cable pin out see section 4 for different sensor type connections ...........................5 2.2 IP Cable code ...................................................................................................................................................6 3. Pinout of Leap Circuit Boards ................................................................................................................... 7 3.1 Multi-Sensor Board .........................................................................................................................................7 3.2 Multi-Sensor Board Motor Monitor Lite ...................................................................................................8 4. Sensor Wiring........................................................................................................................................... 9 4.1 Wireless Analog Input 4-20mA, 0-5V, 0-10V ................................................................................................9 4.1.1 4-20mA loop powered (2-wire), 24V excitation ................................................................................9 4.1.2 4-20mA loop powered (3-wire), 24V excitation ................................................................................9 4.1.3 0-10V, self powered ........................................................................................................................10 4.1.4 0-10V, 24V excitation ......................................................................................................................10 4.1.5 4-20mA and 0-10V equivalent for Multi-Sensor Board ...................................................................11 5. Panel Connector Pinout ......................................................................................................................... 12 5.1 Panel Connectors Node Side ......................................................................................................................12 5.2 Panel Connectors Node Side variation option.........................................................................................12 5.3 Panel Connector Cable Side - Unshielded ..................................................................................................13 5.4 Panel Connector Cable Side Shielded ......................................................................................................14 6. Technical Support .................................................................................................................................. 15 Copyright and Trademarks No part of this product or related documentation shall be reproduced in any form by any means without prior written authorization of Phase IV Engineering, Incorporated. No part of this document shall be reproduced, stored in a retrieval system, or transmitted by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission from Phase IV Engineering, Incorporated. Although every precaution has been taken in the preparation of this document, Phase IV Engineering assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Phase IV Engineering assumes no responsibility for any loss or claims by third parties that may arise through the use of this product. Phase IV Engineering assumes no responsibility for any damage or loss caused by deletion of data as a result of malfunction, repairs, or battery replacement, or power failure. Phase IV Engineering, Incorporated may have patents, patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in this document. Except as expressly provided in any written license agreement from Phase IV Engineering, the furnishing of this document does not give you any license to these patents, trademarks, copyrights, or other intellectual property. LEAP SYSTEM |2| High Temp Operating Manual This manual, its related hardware, software and documentation are subject to change without notice and do not represent a commitment on the part of Phase IV Engineering. Phase IV Engineering reserves the right to make changes in the product design without reservation and without notification to its users. © 2024 by Phase IV Engineering, Incorporated, 2820 Wilderness Place, Unit C, Boulder, Colorado 80301, USA. All rights reserved. All brands and product names are trademarks or registered trademarks of their respective owners. LEAP SYSTEM |3| High Temp Operating Manual 1. About this Manual This manual contains general information about field wiring sensors to the Leap device node. It is designed to be used either as a reference tool or as a step-by-step guide to connect various sensors to the circuit board inside the Leap device node. This manual is only supplemental to standard Phase IV manuals and only contains specifics about making the low-voltage connections inside the node enclosure. 1.1 Audience This manual assumes that you are already familiar with the [to be installed] sensor connection methods and responsible for installing and wiring the system. LEAP SYSTEM |4| High Temp Operating Manual 2. Chart Industries Node 2.1 Sensor cable code 2.1.1 3-wire sensor cable pin out see section 4 for different sensor type connections LEAP SYSTEM |5| High Temp Operating Manual 2.2 IP Cable code LEAP SYSTEM |6| High Temp Operating Manual 3. Pinout of Leap Circuit Boards 3.1 Multi-Sensor Board LEAP SYSTEM |7| High Temp Operating Manual 3.2 Multi-Sensor Board Motor Monitor Lite LEAP SYSTEM |8| High Temp Operating Manual 4. Sensor Wiring 4.1 Wireless Analog Input 4-20mA, 0-5V, 0-10V 4.1.1 4-20mA loop powered (2-wire), 24V excitation 4.1.2 4-20mA loop powered (3-wire), 24V excitation LEAP SYSTEM |9| High Temp Operating Manual 4.1.3 0-10V, self powered 4.1.4 0-10V, 24V excitation LEAP SYSTEM High Temp Operating Manual |10| 4.1.5 4-20mA and 0-10V equivalent for Multi-Sensor Board LEAP SYSTEM High Temp Operating Manual |11| 5. Panel Connector Pinout 5.1 Panel Connectors Node Side 5.2 Panel Connectors Node Side variation option LEAP SYSTEM High Temp Operating Manual |12| 5.3 Panel Connector Cable Side - Unshielded LEAP SYSTEM High Temp Operating Manual |13| 5.4 Panel Connector Cable Side Shielded LEAP SYSTEM High Temp Operating Manual |14| 6. Technical Support For more information about our products and services, or for technical assistance: Visit us at: www.phaseivengr.com Tel: +(303) 443 6611 (USA MST 8:00 a.m. to 5:00 p.m., Mon.-Fri.) E-Mail: support@phaseivengr.com If you need assistance, please provide the product part number, product serial number, and product version. LEAP SYSTEM High Temp Operating Manual |15|