Akko 3084 BT5.0 Mechanical Keyboard User Manual

Welcome to the Akko 3084 BT5.0 User Manual. This guide provides detailed information on setting up and using your new mechanical keyboard.

3084 Technical Specifications

3084 HotKeys

The keyboard features several hotkey combinations accessible via the Fn key. Below is a description of the keyboard layout and its primary functions.

General Layout: Standard QWERTY layout with function keys (F1-F12), navigation keys, and modifier keys.

Fn Key Combinations:

3084 System Commands

Control system functions using the following key combinations:

3084 Backlight Settings

Adjust the keyboard's backlighting using the following Fn key combinations:

3084 Bluetooth Feature Overview & Setup

The Akko 3084 supports Bluetooth 5.0 connectivity, allowing for wireless operation with multiple devices.

LED Indicators:

Bluetooth Setup Instructions:

1. Switch to Bluetooth mode: Long press Fn + Tab. The Tab LED will flash, indicating Bluetooth mode is activated.
2. Set the Bluetooth profile: The keyboard can memorize 4 switchable Bluetooth devices, saved in 4 Bluetooth profiles. To select a profile and initiate device searching, press Fn + E/ R/ T/ Y (corresponding to BT1/BT2/BT3/BT4). Once set up and paired, the keyboard will remember the last connected device.
3. Bluetooth Pairing: Ensure Bluetooth is enabled on your PC/PAD/iPhone. The keyboard will appear in the device list based on the selected Bluetooth profile (e.g., Akko 3084-BT1, Akko 3084-BT2, Akko 3084-BT3, Akko 3084-BT4).
4. Switch the Bluetooth device: After pairing up to 4 devices, long press Fn + E / R / T / Y for at least 3 seconds to quickly switch between them.
5. Shut off the keyboard: Turn the power switch on the back panel OFF when not in use to save power. The keyboard enters sleep mode after 10 minutes of inactivity and can be woken by pressing any key. Note: Windows power-saving modes may affect sleep/wake times.
6. Reset the keyboard: If you forget paired devices or experience connection issues, press Fn + ~ to reset the keyboard. This erases all stored pairing information.

Akko Macro V1.0 Setup & Usage

The Akko Macro V1.0 system allows for hardware-based macro programming without requiring additional software.

Macro V1.0 Overview:

• Hardware-based, no software driver needed.
• The following keys cannot be programmed: "Esc", "Fn", and "Left Win".
• Does not support simultaneous key triggers (e.g., pressing "AB" simultaneously will trigger A then B).
• Does not support customized interval times between key presses.

Macro Setup Instructions:

Flowchart:

Enter Macro Mode (Long Press Fn + Left Win) → Start Macro Editor (Fn + Esc) → Fn + Custom Key (Select Key to Record) → Macro Recording (Press Keys to Store) → Fn + Custom Key (End Recording) → Record the next Key.

Exiting:

Exit Macro Mode (Back to Default Mode) → Exit Macro Editor (Fn + Esc)

Clearing Macros:

If a key has been defined, enter the Macro editor and press FN + the key to clear its definition. To re-customize, clear the old definition first, then press FN + the key again to start new recording.

Macro Recording Example: Define "A" as "AKKOGEAR"

1. Press and hold Fn + Left Win for 3 seconds to enter Macro mode.
2. Press Fn + Esc to launch the Macro editor.
3. Press Fn + A to select key "A" for recording.
4. Press the keys A, K, K, O, G, E, A, R in sequence.
5. Press Fn + A again to end the Macro recording for key "A".

Now, pressing "A" in a text editor will display "AKKOGEAR". To define a macro for key "B", press Fn + B to start recording.

6. Press Fn + Esc to exit the Macro editor.
7. Press and hold Fn + Left Win for 3 seconds to exit Macro mode and return to default key definitions.

Calling Macros:

Method A (Using Macro Mode):

• Enter Macro mode by long pressing Fn + Left Win. All keys will use their pre-configured definitions with the Win key locked.
• Press Fn + Win to unlock the Win key if necessary.
• In Macro mode, you can use keys with customized definitions.
• Note: The Macro mode is turned off by default after rebooting or replugging the cable. You must re-enter Macro mode to use custom definitions.

Method B (From Default Mode):

• Under the default key definition, quickly call customized content by pressing Fn + Right Alt + the key that has been defined through Macro.
• Note: Ensure you press Fn first, then Alt, then the custom key.

Akko Warranty and Service Statement

Warranty Statement:

• Akko provides a 1-year warranty for customers in mainland China for non-human-induced damage, starting from the purchase date.
• For regions outside mainland China, please contact your seller or Akko distributor for specific warranty policies.
• If the warranty period expires, Akko will offer repair services for a fee, not exceeding the market average price.
• Users who disassemble the keyboard without manufacturer/seller instructions will void the warranty. Such repairs will follow clause 2.
• Special service terms on different sales platforms are subject to the rules of the purchasing platform.

Precautions:

Man-made damage includes, but is not limited to, immersion in liquids, dropping from heights, and excessive force applied to cables. As the keyboard is an electronic product, please handle it with care.

Contact Information:

After-sales Service Phone: 0755-27728007

After-sales Service QQ: 981572876

Official Service Hours: Monday to Friday, 10:00 AM to 6:00 PM (Beijing Time). Public holidays follow national regulations.

Note: Service time may vary due to uncontrollable factors like repair time, logistics, and parts procurement. Evaluation will be based on the actual damage condition. Your patience is appreciated.

Connect with Akko

Visit our official website: www.akkogear.com

Follow us on social media:

• Instagram: instagram.com/akkogear
• Facebook: facebook.com/akkogear

Scan the QR codes to follow our official WeChat and Weibo accounts.

[QR Code for WeChat] [QR Code for Weibo]