IMILAB Video Doorbell System User Manual

CONTENTS

This manual covers the following sections:

1. Getting started
2. Product overview
3. Setting up the system
4. Mounting the video doorbell
5. Detach the Doorbell
6. Charging the doorbell
7. Explanations for LEDs
8. Safety statement & Precautions
9. Regulatory Information (FCC, WEEE, EU Declaration)
10. Manufacturer Information
11. Revision History

Getting Started

This section outlines the components included in the IMILAB Video Doorbell Set:

• IMILAB Video Doorbell
• Mounting Bracket
• Screw Hole Positioning Card
• Micro-USB Charging Cable
• Doorbell Detaching Pin
• Mounting Screws and Anchors
• IMILAB Smart Hub

Product Overview

IMILAB Smart Hub

• Status LED
• Speaker
• MicroSD Card Slot
• Power Button
• Reset Button
• SYNC Button

IMILAB Video Doorbell

• Camera Lens
• Light Sensor
• LED Ring
• Doorbell Button
• Motion Sensor
• Microphone
• Micro USB Charging Port
• Speaker

Setting up the System

To set up your IMILAB Video Doorbell System:

1. Download the Imilab Home APP from your device's app store (iOS) or Google Play (Android).
2. Sign up for an Imilab Home account and follow the on-screen instructions to complete the system setup.

Mounting the Video Doorbell

Finding a Mounting Spot

Take the video doorbell to your front door and check the live view on the App. Choose a location that provides the desired field of view. Consider the following:

• If placing the doorbell near a side wall, ensure the wall does not obstruct the field of view. Otherwise, IR light reflection may cause blurry night vision.
• The recommended mounting height is 1.2 meters (48 inches) from the ground.

Mounting on Hard Surfaces (e.g., Brick, Concrete, Stucco)

1. Use the Screw Hole Positioning Card against the wall to mark the hole positions.
2. Drill two holes using a 15/64" (6mm) drill bit.
3. Insert the provided anchors into the drilled holes.
4. Secure the Mounting Bracket onto the wall using the provided long screws.

Required Tools: Power Drill [not provided], 15/64" (6mm) Drill Bit, Mounting Bracket, 15° Mounting Wedge, Mounting Screws and Anchors.

Mounting on a Wooden Surface

1. Use the Screw Hole Positioning Card to mark the screw hole positions.
2. Secure the Mounting Bracket directly onto the wooden surface using the provided screws.

Required Tools: Screwdriver [not provided], Mounting Bracket, 15° Mounting Wedge, Mounting Screws and Anchors.

Using the 15° Mounting Wedge

The 15° Mounting Wedge can be used as a supplementary mounting bracket to adjust the viewing angle to one side, providing a better view of specific areas.

Visual Description: Diagrams show the Video Doorbell mounted directly to a wall (without wedge) and mounted using the 15° wedge, illustrating the different viewing angles. Tools required for mounting are also depicted.

Detaching and Charging the Doorbell

Detach the Doorbell

To detach the doorbell from the Mounting Bracket:

1. Use the provided Doorbell Detaching Pin.
2. Press and hold the hole located on the top of the doorbell.
3. Lift the bottom of the doorbell to detach it.

Required Tool: Doorbell Detaching Pin.

Charging the Doorbell

Connect the doorbell to a power source using a 5V USB Charger.

Explanations for LEDs

IMILAB Smart Hub LED Status

• Blinking blue: Waiting for connection.
• Solid blue: Network connection is successful / connected.
• Blue and orange flashes alternately: Network connection failure.
• Blinking orange: Waiting for doorbell to connect.
• Solid orange: A firmware update is in progress.
• Note: During the reset process, the hub will restart.

IMILAB Video Doorbell LED Status

• Power on: You will hear power-on music.
• Power off: You will hear power-off music.
• Charging: Continuous blinking green light.
• Fully charged: Solid green light.
• PIR detects motion: Orange light blinks once.
• PIR continues to detect motion: Orange light blinks continuously.
• Doorbell button pressed: Indicator light blinks blue.

Safety Statement and Precautions

Specifications

• IMILAB Video Doorbell: Model CMSXJ33A, Resolution 2560x1440, Dimensions 60 x 33 x 142 mm, Operating Temperature -20 °C ~ 50 °C, Aperture F1.6, Power Input 5 V 2 A, FCC ID XXXXXXXX.
• IMILAB Doorbell Hub: Model CMWG33B, Power Input 100-240V~50/60hz0.3A MAX, Dimensions 57 x 34 x 105mm, Operating Temperature -10 °C ~ 45 °C, Expandable Memory MicroSD card (up to 64 GB), Wireless Connectivity Wi-Fi IEEE 802.11 b/g/n 2.4 GHz, FCC ID XXXXXXXX.

Precautions

• The product operates optimally between -20°C and 50°C. Avoid use outside this range.
• Charging is recommended between 0°C and 45°C. Avoid charging outside this range, as it may affect standby time.
• To improve performance, do not place the video doorbell lens facing or next to reflective surfaces like glass windows or white walls, as this can cause image distortion (overly bright or white areas).
• Install the product in areas with strong Wi-Fi reception. Keep it away from metal structures, microwave ovens, or other sources of signal interference.
• Do not attempt to replace the battery yourself, as improper replacement can pose an explosion hazard. Batteries must not be exposed to excessive heat or direct sunlight.
• To preserve battery life, avoid using the Real-Time Monitoring feature for extended periods while charging.
• Do not use the device in extreme temperatures or excessively wet environments.

Regulatory Information

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules, designed to provide reasonable protection against harmful interference in a residential installation. If interference occurs, users are encouraged to try correcting it by reorienting or relocating the receiving antenna, increasing separation between equipment and receiver, or connecting the equipment to a different circuit. Consult a dealer or technician for assistance.

FCC 20cm Statement

This equipment complies with FCC radiation exposure limits for an uncontrolled environment. It should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

WEEE Information

Products bearing the WEEE symbol are waste electrical and electronic equipment. Dispose of them at designated collection points for recycling, rather than mixing with household waste, to protect human health and the environment. Contact local authorities for more information on collection points and terms.

EU Declaration of Conformity

Shanghai Imilab Technology Co., Ltd. declares that the radio equipment type IMILAB EC4 and IMILAB Smart Hub are in compliance with Directive 2014/53/EU.

California Proposition 65 Warning

This product can expose you to chemical Lead, which is known to the state of California to cause cancer. For more information, visit www.P65Warnings.ca.gov.

Manufacturer Information

Manufacturer: Shanghai Imilab Technology Co., Ltd.

Address: Room 001A, Floor 11, Block 1, No. 588 Zixing Road, Minhang District, Shanghai, China.

For further information: www.imilab.com

Support: help@imilab.com, www.imilabhelp.com

Revision History