Welcome
Flybar, Inc. values the safety of all children. We recommend the use of an approved safety helmet when using this toy.
ATTENTION: This product is packed with battery before use.
WARNING: This manual contains important safety and use information. An adult must read the entire manual. Adult supervision is required at all times.
Important Safety Information
Electrical Hazard (DANGER)
To prevent electric shock, do not immerse in water; wipe clean with a damp cloth.
Prevent Fire (WARNING)
- Never modify the electrical system.
- Use of the wrong type of battery or charger could cause fire or explosion.
- Use only Flybar® components in Flybar® vehicles.
- Battery must be handled by adults only.
- Never allow children to charge the battery.
- Never lift or carry the battery by the wires or connector. Lift by the case only.
- Read safety instructions on the battery.
- Examine battery, charger, and connectors for wear or damage before each charge.
- Hot motors. Handle carefully.
Prevent Injuries and Deaths (WARNING)
- Direct adult supervision required.
- Never ride at night.
- Keep children within safe riding areas: away from water, level ground, away from steps, steep inclines, cars, roads, and alleys.
Riding Rules
- Always sit on the seat.
- Always wear shoes.
- Only one rider at a time.
Important Notes
1. Warning: Protective equipment should be worn. Not to be used in traffic.
2. The toy should be used with caution as skill is required to avoid falls or collisions causing injury.
Product Specifications
| Feature | Specification |
|---|---|
| Motors | 2 @ 15 Watts |
| Battery | 6 Volts DC, 4 Ah |
| Charger | 7.5 Volts 500 Ma |
| Speed | 1 mph (1.6 km/h) |
| Suitable Age | 18 Months to 4 Years |
| Maximum User Weight | 66 Lbs (30 Kg) |
| Dimensions | 25.75"x 25.75"x 15.16" |
| Battery Charge Time | 8-12 hours (maximum 20 hours) |
ATTENTION: Battery is partially charged upon purchase. You must fully charge battery before use.
User Instructions
Before Use
- Remove the two screws from the seat cover and lift out the cover.
- Connect the battery terminals: connect the same color wires together (black to black, red to red). Ensure correct polarity.
- Replace the seat cover and tighten the screws.
Charging the Battery
- Plug the charger into a standard 120v wall outlet and the DC charging plug into the charging port.
- Fully charge the battery for 8-12 hours. The indicator light on the charger is Red when not fully charged and turns Green when fully charged.
- Do not charge the battery for more than 20 hours.
- Check the battery and charger for any signs of wear or damage before use.
Operating the Vehicle
- Press the power switch to turn the vehicle on.
- Push or pull the control joysticks to move the vehicle.
- Release both control joysticks to stop the vehicle completely.
WARNING: Close supervision is required when a child is operating the vehicle.
Parts and Features
The Flybar Ride-On Bumper Car includes the following parts:
- 1. Bumper car body
- 2. Seat cover
- 3. Seat belt
- 4. Control Joysticks
- 5. Power On/Off switch
- 6. Charging port
- 7. Charger
Illustration showing the main components of the bumper car, including the body, seat, seat belt, joysticks, power switch, charging port, and charger.
Care and Maintenance
- Regularly check for missing or loose parts, and for any broken or cracked plastic parts.
- When not in use for an extended period, cover the product and keep away from heat and damp weather. Disconnect battery terminals, then reconnect and fully charge every three months to ensure normal use.
- Clean the Bumper Car with a cloth and non-wax furniture polish. Do not use abrasive cleaners.
- Do not wash the toy with a hose or immerse any parts in water.
Troubleshooting
| Problem | Possible Reason | Solution |
|---|---|---|
| Vehicle does not move | Low battery | Fully charge the battery. |
| Fuse protection | Replace with a new fuse. | |
| Disconnected/Badly connected battery | Reconnect the battery. | |
| Failed battery / engine | Contact customer service. | |
| Vehicle does not run very long | Low battery | Fully charge the battery. |
| Old battery | Replace battery if necessary. | |
| Vehicle runs very slow | Low battery | Fully charge the battery. |
| Old battery | Replace battery if necessary. | |
| Vehicle is overloaded | Ensure user's weight is under 66 lbs / 30 kg. | |
| Vehicle is being used in harsh environment | Avoid using the vehicle in harsh environments. | |
| Loud grinding sound or clicking sound from the motor or gear box | "Dead spot" on motor | Contact customer service. |
| Damaged motor or gear box | Contact customer service. | |
| Battery does not charge | Disconnected / badly connected charger | Reconnect the battery. Make sure the charger is firmly plugged into the power source and connected to the charging port. |
| Charger not working | Contact customer service. | |
| Charger feels warm with charging | Normal | Normal. |
Limited Warranty Terms
One Year Limited Warranty on 6-Volt Bumper Car Ride-on Product
Six-Month Limited Warranty on Battery
Flybar, Inc. warrants this product to the original retail purchaser. The ride-on product (except for the battery) is warranted against defective materials or workmanship for one year from the date of original purchase. The battery is warranted against defective materials or workmanship for six months from the date of original purchase. An original receipt is required to validate your warranty. Flybar, Inc. will, at its option, provide replacement parts or replace this product. Flybar, Inc. reserves the right to substitute if the part or model has been discontinued.
What does this Limited Warranty cover?
This Warranty covers all parts of the electric ride-on toy to be free from defects in workmanship and materials, provided the toy is used under normal conditions for its intended purposes by a person capable of controlling it, and receives necessary maintenance and adjustments.
What is not covered by this Limited Warranty?
This Warranty does not include labor and transportation charges. It does not cover any damage caused by crash, collision, misuse, abuse, neglect, improper assembly, improper maintenance, lack of maintenance, alteration, or similar damage. This Warranty will be void if the product is installed with a motor or modified in any other way, or used contrary to the instructions in the manual.
How do you make a claim under this Limited Warranty?
Warranty claims should be submitted via Flybar's online portal at www.flybar.com/pages/contact-us or via email at info@flybar.com. Proof of purchase is required.
Limitation of Damages
The warranty and remedies are exclusive. Flybar, Inc. or the dealer will not be liable for incidental or consequential damages arising out of the use or inability to use this product. Some states do not allow limitations on incidental or consequential damages, so the above limitation may not apply to you.
Limitation of warranties and other warranty terms: Any implied warranties, including warranties of merchantability and fitness for a particular purpose, are limited to the duration of the express written warranty. Some states do not allow limitations on implied warranties, so the above limitation may not apply to you.
FCC Information
WARNING: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
