Leuchten Direkt 997287 LED Luminaire
Model: 997287
Technical Specifications
LED Board Specifications
| Feature | LED Board 1 (17W) | LED Board 2 (5W) |
|---|---|---|
| Power | 17 W | 5 W |
| Luminous Flux | 2,150 lm | 510 lm |
| Wattage Equivalent | 22 W | 22 W |
| Lifespan (t) | 30,000 h | 30,000 h |
| Color Temperature (Tk) | 3,000 K | 3,000 K |
| Switching Cycles | 15,000 x | 15,000 x |
| Switching Time | <0.5 s | <0.5 s |
General Luminaire Specifications
- Power Supply: 230V / 50Hz~
- Included Components: 1x LED-Board 280V DC / 17 W, 1x LED-Board 280V DC / 5 W
Installation and Components
The luminaire requires installation by qualified personnel. The following components and steps are depicted:
Assembly Overview
The main diagram illustrates the assembly of the LED luminaire, typically involving mounting to a ceiling, wiring, and attaching the diffuser.
Diagram shows a ceiling-mounted fixture with wiring connections.
Key Components and Steps:
- Component 1: Main luminaire housing/frame.
- Component 2: Mounting hardware (e.g., screws or anchors).
- Component 3: Wire connectors, such as push-in terminal blocks.
- Component 4: Power cable entry point.
- Component 5: Terminal block for mains wiring, typically labeled for Live (L), Neutral (N), and Earth (PE/GND). The diagram shows connections labeled 'a', 'b', 'c' corresponding to Live, Neutral, and Earth respectively.
- Component 6: Light diffuser or cover.
- Component 7: Mounting bracket or plate for attaching the luminaire to the ceiling.
- Component 8: A tool, likely a screwdriver, used for assembly.
- Component 9: A detailed wiring diagram showing the connection of the LED boards and mains supply.
Installation Details:
- Mounting holes may require a diameter of Ø6mm.
- The luminaire may require 2x mounting points.
- The diagram indicates two LED boards are used.
Light Output Modes
The luminaire features different light output modes, controlled by a switch or internal setting:
- Mode 1/0: Likely indicates an ON/OFF or primary mode.
- The bottom illustrations show three distinct lighting states: full illumination, a lower level of illumination, and potentially an off state.
Important Safety Information: Light Source Replacement
The light source within this luminaire should only be replaced by the manufacturer, a service technician commissioned by the manufacturer, or a person with comparable qualifications. This ensures safety and proper functioning of the product.
This warning is presented in multiple languages in the original document.
