Samsung SH37R / SH37R-B Quick Setup Guide

Checking the Components

Ensure you have all the necessary components. Contact your vendor if any are missing. Components may vary by location.

• Quick Setup Guide
• Regulatory guide
• Batteries (AAA x 2) (Not available in some locations)
• External IR cable
• Power cord
• Remote Control
• Warranty card (Not available in some locations)

Ports

The display features various ports for connectivity:

• RS232C IN
• RS232C OUT
• AUDIO OUT
• IR IN
• USB+ (1.0A)
• HDMI IN 1 (ARC)
• HDMI IN 2 (DAISY CHAIN IN)
• DP IN (DAISY CHAIN IN)
• HDMI OUT (DAISY CHAIN OUT)
• RJ45

Connecting and Using a Source Device

Refer to the following connection diagrams:

Connecting to a PC

Connect using HDMI IN 1 (ARC) or HDMI IN 2 (DAISY CHAIN IN) ports with an HDMI cable or HDMI-DVI cable. You can also connect via the DP IN port using a DP cable.

Connecting to an Audio System

Connect to an audio system using the AUDIO OUT port and an audio cable (White and Red).

Connecting to a Video Device

Connect to a video device using HDMI IN 1 (ARC) or HDMI IN 2 (DAISY CHAIN IN) ports with an HDMI cable or HDMI-DVI cable.

Connecting to MDC

Connect to MDC using an RS232C adapter via the RS232C IN port. Multiple products can be connected using a serial cable (sold separately).

Connecting the LAN Cable

Connect to MDC and the Internet using a LAN cable (10/100 Mbps) via the RJ45 port. Use Cat7 (*STP Type) cable for the connection.

Parts Description

• Power button: Turns the product on or off.

Troubleshooting Guide

Issues and Solutions

• The screen keeps switching on and off.
  Check that the cable between the product and the PC is connected correctly.
• No Signal is displayed on the screen.
  Check that the products (including the source device) are connected correctly with a cable. Check that the source device connected to the product is powered on.
• Not Optimum Mode is displayed.
  This message appears when a signal from the graphics card exceeds the product's maximum resolution and frequency. Refer to the Standard Signal Mode Table and set the maximum resolution and frequency according to the product specifications.

Specifications

• Model Name: SH37R/SH37R-B
• Panel Size: 37 CLASS (36.9 inches/93.9 cm)
• Display area: 904.32 mm (H) x 254.34 mm (V)
• Power Supply: AC100-240V~50/60Hz
• Environmental Considerations (Operating): Temperature: 32 °F-104 °F (0°C-40 °C), Humidity: 10%-80%, non-condensing
• Environmental Considerations (Storage): Temperature: -4 °F-113 °F (-20 °C-45°C), Humidity: 5%-95%, non-condensing

For detailed device specifications, visit the Samsung Electronics website: http://www.samsung.com/displaysolutions

Important Safety Instructions

Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to install the product.

• CAUTION: RISK OF ELECTRIC SHOCK DO NOT OPEN
• Ensure proper ventilation by not blocking slots and openings.
• Keep the product away from heat sources.
• Do not place water vessels on the apparatus.
• Connect to an earthed MAINS socket-outlet (Class I Equipment only).
• The mains plug must be readily operable for disconnection.
• The product remains connected to the AC power source even when the power button is off.
• [USA] State of California Proposition 65 Warning: AWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Contact SAMSUNG WORLD WIDE

For customer support, please refer to the following:

• Web site: http://www.samsung.com
• U.S.A: 1-800-SAMSUNG (726-7864)
• CANADA: 1-800-SAMSUNG (726-7864)
• MEXICO: 1-800-SAMSUNG (726-7864)
• (Contact details for other countries are available in the PDF)