Midea PAD35C1DWT Portable Air Conditioner Exploded View Parts Diagram
Product Overview
This document provides a detailed exploded view of the Midea PAD35C1DWT portable air conditioner, illustrating all major components and their assembly order. It is intended for identification of replacement parts.
Component List
- 1: Main Housing / Cabinet - The primary outer casing of the portable air conditioner unit.
- 1.1: Internal Bracket/Support - A component likely used for mounting internal parts within the main housing.
- 2: Fan Assembly - The complete unit responsible for air circulation, including the housing, impeller, and motor.
- 2.1: Fan Housing - The enclosure for the fan impeller and motor.
- 2.2: Fan Impeller / Wheel - The rotating component that moves air.
- 2.3: Fan Motor - The motor that drives the fan impeller.
- 2.4: Optional Fan Component - An additional part for the fan assembly, not present in all configurations.
- 3: Base Assembly - The bottom section of the unit, providing stability and housing for casters.
- 3.1: Base Housing - The main structural part of the base.
- 3.1.1: Handle/Tube - A component integrated into the base assembly, possibly for handling or connecting parts.
- 3.1.2: Caster/Wheel Mount - The attachment point for casters within the base assembly.
- 3.2: Casters / Wheels - Wheels attached to the base for mobility.
- 4: Base Tray / Bottom Panel - A panel forming the underside of the base.
- 5: Electronics Module / Control Unit - The assembly containing the main electronic components and control circuitry.
- 5.1: Power Supply / Transformer - Component responsible for regulating electrical power.
- 5.2: Control Board - The main circuit board for managing unit functions.
- 5.2.1: Optional Electronic Component - An additional electronic part, not always included.
- 6: Rear Panel / Back Cover - The panel located at the rear of the unit.
- 6.1: Mounting Bracket / Clip - A fastener or support used for attaching components to the rear panel.
- 7: Air Filter / Grille - A component for filtering incoming air, often integrated with a grille.
- 8: Motor Mount / Bracket - A structure to secure the fan motor.
- 9: Motor - Likely the fan motor, shown separately from the assembly.
- 11: Compressor - The core component responsible for refrigeration.
- 12: Refrigerant Line Connector - A fitting for connecting refrigerant lines to the compressor.
- 13: Refrigerant Line Connector - A fitting for connecting refrigerant lines, possibly to the condenser/evaporator.
- 14: Condenser/Evaporator Fin - Part of the heat exchange coils.
- 15: Condenser/Evaporator Fin - Part of the heat exchange coils.
- 16: Condenser/Evaporator Unit - The assembly containing the heat exchange coils.
- 17: Mounting Bracket / Support - A piece used to support or mount components.
- 18: Front Panel Assembly - The front section of the unit, typically housing controls and displays.
- 18.1: Display Panel - The screen or indicator area for showing settings and status.
- 18.2: Button/Switch Array - The set of physical buttons or switches for user input.
- 18.3: Sensor / Small Component - A small electronic component, possibly a temperature sensor.
- 18.4: Cover / Trim Piece - A decorative or protective cover for the front panel.
- 19: Top Cover / Grille - The uppermost panel of the unit, potentially with air vents.
- 21: Power Cord Assembly - The electrical cord used to connect the unit to a power source.
- 22: Optional Power Adapter / Connector - An optional accessory for power connection.
