Midea MAP12S1TBL Air Conditioner - Parts Diagram
This document provides an exploded view of the Midea MAP12S1TBL air conditioner, illustrating the various replacement parts and their assembly.
Main Unit Components
The main unit is depicted with several key assemblies:
- Item 1: Base assembly, including item 1.1 (base) and item 1.2 (front panel). Item 1.3 indicates this section is for some models.
- Item 2: Vertical rod.
- Item 3: Control panel assembly, comprising items 3.1 (main control panel), 3.2 (cover), 3.3 (button), 3.4 (display panel), 3.5 (switch), and 3.6 (connection terminal).
- Item 4: Fan assembly, including item 4.1 (fan motor bracket), 4.2 (fan motor), 4.3 (fan wheel), and 4.4.1 (fan cover).
- Item 5: Power cord.
- Item 11: Housing.
- Item 27: Decorative panels.
Internal Assemblies and Components
Various internal parts are shown:
- Item 6: Air filter.
- Item 7: Water level sensor.
- Item 8: Water tank.
- Item 9: Water pump.
- Item 10: Drain hose.
- Item 12: Fasteners, including items 12.2, 12.3, 12.4, and 12.6, likely screws and washers.
- Item 13: Rear panel.
- Item 15: Top cover.
- Item 20: Condenser.
- Item 21: Evaporator.
- Item 22: Compressor.
- Item 23: Compressor bracket.
- Item 24: Compressor mounting components.
- Item 25: Refrigerant pipe.
External and Specific Model Components
Additional components are highlighted:
- Item 14: Front grille.
- Item 16: Handle.
- Item 17: Remote control receiver module (for some models).
- Item 18: Power switch.
- Item 19: Indicator light.
- Item 33: Terminal block.
- Item 34: Wiring harness.
Component Groupings
Certain parts are grouped for clarity:
- A section labeled 'for some models' indicates specific components like item 17 (remote control receiver module) and items 33, 34 (terminal block and wiring harness) are not universally included.
- The fan assembly (Item 4) shows the motor, wheel, and cover.
- The control panel assembly (Item 3) details the main panel, cover, buttons, display, switch, and terminals.