Midland Beeper One GPS Dog Tracker Instructions
Thank you for choosing the Beeper One GPS, an advanced tool designed to ensure safety, efficiency, and control during your hunting activities. This device allows for real-time tracking of your dog, providing a precise view of its movements, even in the most rugged terrains and challenging conditions.
Our collar was developed to enhance cooperation between the hunter and their dog, increase animal safety, and improve hunting efficiency. Whether you are an experienced hunter or a beginner, this manual will guide you step-by-step through the proper use of the device, from initial setup to field tracking.
We invite you to carefully read the instructions in this manual to fully utilize all the features of your GPS collar and ensure a safe, responsible, and rewarding hunting experience.
Precautions for Use
- Dog Age: It is not recommended to use the Beeper One GPS collar with the sound activated on dogs younger than 6 months. It is important to gradually accustom puppies to the sound emitted by the device to avoid any stress or discomfort.
- Veterinary Check-up: Before using any type of electronic collar, it is advisable to have your dog undergo a complete veterinary examination to verify its health status and suitability for using such a device.
- Sound Adaptation: Gradually accustom your dog to the Beeper One GPS by letting it familiarize itself with the sound produced. The volume can be adjusted as needed; it is recommended to start with a moderate sound level. If the dog shows signs of discomfort or intolerance to the sound, discontinue use of the device.
- Use in Enclosed Spaces: Avoid using the Beeper One GPS in enclosed spaces, where the sound power of the device could cause hearing damage. It is recommended to perform all configuration and volume adjustment operations before placing the collar on the dog.
- Water Resistance and Maintenance: The collar is waterproof and can be submerged in water; therefore, the dog can cross streams or wet areas without problems. However, in case of prolonged immersion, mud or foliage may obstruct the acoustic cavity of the speaker, reducing the sound volume. In this case, it is necessary to unscrew the sound diffuser and remove debris to restore proper functioning.
- Storage: After use, carefully dry the device before storing it in a cool, dry place. Avoid direct exposure to sunlight or heat sources.
- Safety: Keep the device out of reach of children. The collar is not a toy and, if activated in an enclosed space, it can cause permanent hearing damage.
Package Contents
The Beeper One GPS is supplied with the following accessories:
- Remote control
- Dog collar with belt
- Desktop charger
- Dual power supply
- 2 USB Type-C cables
- MIDLAND Neck Strap
Main Features
- Simultaneous tracking of two dogs
- Range up to 2.5 km
- Real-time distance and direction
- "Point dog" alert
- "Vibro" function on the collar and remote control for silent interaction
- Remote control with large screen
- Remote control of the collar
- Rechargeable batteries
- IPX7 waterproof collar: resistant to immersion up to 1 meter deep, ideal for wet or aquatic environments
- IPX5 waterproof remote control: resistant to rain and water splashes, ideal for humid environments
Performance and Usage Conditions
The Beeper One GPS has been designed to offer optimal outdoor performance, even during the most demanding hunting activities.
Device performance may vary depending on environmental and weather conditions. Natural or artificial obstacles such as hills, buildings, dense trees, or foliage can reduce signal range.
In ideal conditions in open terrain, the maximum range can reach up to 2,500 meters.
Description of Parts
Remote Control
- ON/OFF button
- Screen
- Menu
- OK
- Dog 1
- 1 Beeper Beep
- Beeper Off
- Turn on Beeper
- Collar attachment
- USB charging; Firmware update
- Beeper Volume (3 levels)
- Beeper Vibration
- Dog 2
- Quit
Beeper
- Acoustic diffuser
- LED
- Collar loops
- Magnetic ignition sensor
Screen
- DOG 1 Indicators
- DOG 1 Battery Status
- DOG 1 Radio Signal
- DOG 1 GPS
- Distance and direction of the selected dog
- Distance and direction of DOG 2
- DOG 2 Radio Signal
- DOG 2 Battery Status
- DOG 2 Indicators
- Remote control alerts (vibration and/or sound)
- Remote control battery status
- Remote control GPS
- Remote control NORTH indicator
Menu Functions
Calibration
This function allows you to calibrate the internal compass of the remote control to ensure accurate tracking of the dog's direction. For maximum accuracy of the beeper's direction and distance, it is recommended to calibrate the remote control before each use.
Calibration Procedure
- Turn on the remote control.
- Press the OK button once to access the main menu.
- The first item displayed will be "CALIBRATION".
- Press the OK button again.
- A graphical indication will appear on the screen asking you to rotate the remote control three times counterclockwise.
- After the three rotations, the remote control will emit a vibration and an audible alert.
- A new graphical indication will appear asking you to rotate the remote control horizontally three times counterclockwise.
- After the three rotations are completed, the remote control will emit a vibration and a double audible alert.
- The message "PRESS OK" will appear on the screen.
- Press the OK button to finalize the calibration.
Once confirmed, the calibration will be successfully completed.
Compass
This function displays the direction of magnetic north relative to the position and orientation of the remote control. It is useful for orientation during hunting activities or in natural environments.
How to access the function:
- Turn on the remote control.
- Press the OK button once to access the main menu.
- The first item displayed will be: CALIBRATION.
- Press the OK button again to scroll to the next item: COMPASS.
- When "COMPASS" is selected, press the OK button to enter the section.
Once in the section, the compass will display a clear graphical indication on the screen, representing the position of north relative to the orientation of the remote control. North will be represented by an arrow that pivots in real-time according to the device's movements.
Note: for accurate reading, it is advisable to calibrate the remote control before using the compass function, especially if you have changed geographical location since the last calibration.
Ringing Tone
This setting allows you to adjust the volume of the audible signals emitted by the remote control, such as selection confirmations or alerts related to the dog's activity (e.g., point dog). You can choose between four volume levels, depending on the environment and user preferences:
- OFF - No sound: useful in situations where complete silence is required.
- Low - Reduced volume: ideal for quiet environments or discreet use.
- Medium - Standard volume: recommended for everyday use.
- High - Maximum volume: perfect for noisy or windy environments.
How to change the ringing tone?
- Turn on the remote control.
- Press the OK button once to access the main menu.
- The first item displayed will be: CALIBRATION.
- Press the OK button again to scroll to: RINGING TONE.
- When "RINGING TONE" is selected, press the OK button to enter this section.
- Use the OK button to browse the available options.
- Press the OK button to confirm your selection.
The active selection will be confirmed by a corresponding audible signal, and the remote control screen will display the graphical indicator of the selected volume.
Note: the ringing tone setting applies only to the remote control and does not affect the collar's volume, which must be set separately using the dedicated button.
Vibration
This setting allows you to activate or deactivate the tactile feedback of the remote control for notifications, alerts, or selection confirmations. When activated, the remote control emits a slight vibration as a replacement or complement to the audible signal.
This function is particularly useful:
- In noisy environments where audible signals may not be clearly heard.
- During hunting activities or in situations where maximum silence is required.
- For those who prefer discreet feedback rather than an audible signal.
How to activate/deactivate vibration:
- Turn on the remote control.
- Press the OK button once to access the main menu.
- The first item displayed will be: CALIBRATION.
- Press the OK button again to scroll to: VIBRATION.
- When "VIBRATION" is selected, press the OK button to enter the section.
Lighting
This setting allows you to adjust the brightness of the remote control's screen to three different levels: low, medium, and high. This adjustment optimizes the visibility of the displayed information, adapting to different environmental conditions:
- Low: ideal for nighttime use or in dimly lit environments; reduces glare and helps save energy.
- Medium: standard level, suitable for most situations.
- High: recommended for use in direct sunlight or very bright environments, ensuring good screen readability.
How to change the brightness:
- Turn on the remote control.
- Press the OK button once to access the main menu.
- The first item displayed will be: CALIBRATION.
- Press the OK button again to scroll to: LIGHTING.
- When "LIGHTING" is selected, press the OK button.
- Use the OK button to browse the available options.
- Press the OK button to confirm your selection.
Appearance
This setting allows you to customize the graphical interface of the remote control's screen by choosing between two visual themes: light and dark. This option improves the readability of information based on ambient light conditions and personal user preferences.
- Light theme: light background with dark text. Ideal for use in well-lit environments or during the day, offering high contrast in natural light.
- Dark theme: dark background with light text. Recommended for nighttime use or in dimly lit environments, it reduces eye strain and energy consumption.
How to select the theme:
- Turn on the remote control.
- Press the OK button once to access the main menu.
- The first item displayed will be: CALIBRATION.
- Press the OK button again to scroll to: APPEARANCE.
- When "APPEARANCE" is selected, press the OK button to enter the section.
- Use the OK button to browse the available options.
- Press the OK button to confirm your selection.
Tip: choose the dark theme for outings at dawn or dusk to reduce the device's visibility and maintain a discreet profile during the hunt.
Channel
This setting allows you to define the radio communication channel between the remote control and the Beeper One GPS collar. Four distinct channels are available (CH 1, CH 2, CH 3, CH 4), which can be selected according to operational needs.
The ability to change channels is particularly useful in areas where other similar devices are used, such as during competitions, group hunts, or training sessions. Using a dedicated channel reduces the risk of interference, ensuring a stable and reliable connection between the remote control and the collar.
How to set the channel:
- Turn on the remote control.
- Press the OK button once to access the main menu.
- The first item displayed will be: CALIBRATION.
- Press the OK button again to scroll to: CHANNEL.
- When "CHANNEL" is selected, press the OK button to enter the section.
- Use the OK button to browse the available options.
- Press the OK button to confirm your selection.
Note: ensure that the collar and the remote control are set to the same channel, otherwise communication will not be possible.
Important: The channel is automatically assigned during the pairing procedure with the collar, but it can be manually changed if necessary. If the channel is manually changed from the remote control after pairing with the Beeper, the pairing procedure must be repeated to ensure correct synchronization between the two devices.
Beeper Sounds
This setting allows you to select the set of sounds used by the Beeper One GPS collar for audible signaling. Four different sets are available: Set 1, Set 2, Set 3, and Set 4, each characterized by different tones and frequencies.
This option is designed to offer the user the possibility to customize the experience according to their auditory needs or environmental conditions. Furthermore, distinguishing between sound sets can be useful when using multiple collars simultaneously, making it easy to identify each dog by the specific sound associated with its device.
How to select the sound set:
- Turn on the remote control.
- Press the OK button once to access the main menu.
- The first item displayed will be: CALIBRATION.
- Press the OK button again to scroll to: BEEPER SOUNDS.
- When "BEEPER SOUNDS" is highlighted, press the OK button to enter the section.
- Use the OK button to browse the available options.
- Press the OK button to confirm your selection.
If the Beeper sound set is manually changed from the remote control, the devices must be synchronized for the new settings to take effect. Follow the procedure according to the associated dog.
To synchronize the sounds of Dog 1:
- Press the OK button.
- Press the OK button to send the new information to the Beeper.
To synchronize the sounds of Dog 2:
- Press the OK button.
- Press the OK button to send the new information to the Beeper.
Tip: choose the sound set that best suits your hearing or the type of terrain (dense forests, plains, mountainous areas) where you usually operate.
Language
This setting allows you to select the language of the remote control's interface, making it easier to navigate the menus and use the device's functions in your chosen language.
The following languages are available:
- Italian
- English
- Spanish
- French
- Turkish
- Romanian
- Russian
- Greek
Selecting a language updates all the texts displayed on the remote control's screen, making the user experience simpler and more intuitive for users of different nationalities.
How to change the language:
- Turn on the remote control.
- Press the OK button once to access the main menu.
- The first item displayed will be: CALIBRATION.
- Press the OK button again to scroll to: LANGUAGE.
- When "LANGUAGE" is highlighted, press the OK button to enter the section.
- Use the OK button to browse the available options.
- Press the OK button to confirm your selection.
Note: the selected language will remain active even after the device is turned off, until it is changed again by the user.
Info
The Info section allows you to view the current technical and configuration details of the device. It is particularly useful for quickly checking the operating status of the remote control and for providing technical information in case of support or updates.
When accessing this section, the following data is displayed:
- Ringing tone volume: current set level (OFF, low, medium, high)
- Vibration: vibration function status (activated/deactivated)
- Screen brightness: set level (low, medium, high)
- Appearance: light or dark theme
- Communication channel: one of the four available (CH 1, CH 2, CH 3, CH 4)
- Interface language: currently selected language
- Hardware number: device model identifier
- Firmware version: currently installed system software version
This information allows the user to fully monitor the current configuration and facilitates communication with technical support, if needed, to provide device details.
How to access the Info section:
- Turn on the remote control.
- Press the OK button once to access the main menu.
- The first item displayed will be: CALIBRATION.
- Press the OK button again to scroll to: INFO.
- When "INFO" is highlighted, press the OK button to enter the section.
- Use the OK button to browse the available information.
- Press the BACK button to return to the main menu.
Tip: consult this section regularly to ensure your Firmware is up to date and your settings match your usage needs.
Register Zone
This function allows you to memorize the current geographical position of the remote control as a reference point. It is particularly useful for marking important locations during field activities, such as:
- The spot where the car was parked
- The starting point of a hunt
- An area of interest (e.g., presence of game or a meeting point)
The saved position can be recalled at any time using the Find Position function, even after several hours.
How to save coordinates:
- Turn on the remote control.
- Press the OK button once to access the main menu.
- The first item displayed will be: CALIBRATION.
- Press the OK button again to scroll to: REGISTER ZONE.
- When "REGISTER ZONE" is highlighted, press the OK button to enter the section.
- Press the OK button again to save the coordinates.
Note: it is recommended to save the position only after acquiring a good GPS signal to ensure maximum accuracy.
Return Zone
This function guides the user back to the previously saved position using compass and distance indicators. An arrow on the screen shows the direction to follow, while a distance in meters indicates the remaining distance. This function is particularly useful for:
- Easily finding your car at the end of the activity
- Returning quickly and safely to the starting point
- Navigating in complex environments or in low visibility conditions
How to start the function:
- Turn on the remote control.
- Press the OK button once to access the main menu.
- The first item displayed will be: CALIBRATION.
- Press the OK button again to scroll to: RETURN ZONE.
- When "RETURN ZONE" is highlighted, press the OK button to enter the section.
- Press the OK button again to start the function.
- The screen will display the compass to guide you to the position saved in Save Position.
Tip: when using the "Find Position" function, hold the remote control horizontally and move forward slowly to improve compass accuracy.
Operation
Powering On and Off
Remote Control
To turn on the Beeper One GPS remote control, press and hold the button for approximately 3 seconds.
Once powered on:
- The screen lights up and displays "MIDLAND".
- The device vibrates.
- An audible signal is emitted.
Then, press "OK" to confirm GPS information.
At this point, the remote control is ready for use.
To turn off the remote control, press and hold the button again for 3 seconds until the screen turns off.
Beeper
To turn on the Beeper, bring the red arrow located on a corner of the collar close to the red arrow at the bottom left of the remote control.
To confirm power on:
- The device emits an audible signal.
- The LED lights up solid green.
To turn off the Beeper, repeat the same procedure. An audible signal will confirm the shutdown, and the LED will turn off.
Pairing
To correctly pair the Beeper One GPS with the remote control, ensure that:
- The remote control is turned off.
- The Beeper charging base is properly powered.
Pairing Procedure
- Insert the Beeper into the charging base. Within the first 30 seconds, the Beeper will flash rapidly and emit an audible signal, confirming that pairing mode has started.
- Initiate pairing from the remote control. With the remote control turned off, press and hold the button for approximately 3 seconds.
- To confirm the start of the procedure: An audible signal is emitted. The remote control screen lights up for one second.
Pairing Finalization
- The Beeper's LED will stop flashing rapidly and begin to flash at a regular rhythm.
To pair a second collar with the remote control, repeat the procedure using the button.
Note: during the pairing procedure, the communication channel between the Beeper and the remote control is also assigned.
Dog in Motion
Once pairing and calibration of the remote control are complete, the device is ready for field use.
When the dog moves, the remote control detects and displays in real-time:
- The dog's direction using a compass-like arrow
- The dog's distance in meters, displayed below the arrow
This information allows you to easily track the dog's activity during hunting or training.
Out of Range Signal
If the dog moves beyond the maximum range, the directional arrow on the screen turns white with a black outline, indicating that the radio link is lost and the position is no longer updated.
Note: distance measurement may be less accurate when the dog is within 15 meters of the remote control.
Dog on Point
The Beeper One GPS can detect when the dog is on point, meaning it remains still for a few seconds – a typical behavior for pointing dogs.
When the dog is on point, the system signals:
- A visual alert on the remote control screen, displaying the point dog icon and its updated position.
- An audible signal and/or vibration on the remote control, depending on the chosen settings.
- An audible signal on the Beeper, depending on the chosen settings.
The distance and direction indicators remain active, allowing for precise localization of the dog.
This function is particularly useful for intervening quickly without disturbing the dog during the pointing phase.
Tip: you can customize the alert modes (vibration only, sound only, or both) via the remote control's settings menu, according to your preferences or environmental conditions.
Technical Specifications
- Frequency Range: 433.775 MHz up to 434.200 KHz
- Emission Power: ≥ 10 mW ERP
- Operating Temperature: -20°C to +50°C
Warranty
The consumer benefits from the rights provided by national legislation applicable to the sale of consumer goods, and these rights are not affected by this warranty.
The product is covered against manufacturing defects for the period indicated in the warranty certificate issued at the time of purchase.
The warranty is valid only if the product sent for repair is accompanied by the original warranty certificate, complete with the retailer's stamp and date of purchase, without any alterations.
Shipping costs, both for sending and returning the product to the MIDLAND S.r.l. Service Center, are the responsibility of the user.
The warranty does not cover defects resulting from the use of the product with accessories or software not supplied or manufactured by the manufacturer, nor damage caused by use of the product other than that for which it was designed.
The warranty will be void in case of opening, modification, or repair by unauthorized personnel or repairs carried out with non-original spare parts. Furthermore, the warranty will be void and no compensation can be claimed if the product has been modified or altered from its original characteristics at the time of sale.
The consumer cannot claim any compensation for the period during which the product was unusable, nor claim reimbursement for expenses incurred or direct or indirect damages resulting from incorrect or non-compliant use of the product.
