SVAKOM EMMA NEO User Manual
Explore Your Limits
Product Information
Product Name: EMMA NEO
Made in: China
Website: WWW.SVAKOM.COM
Social Media: @svakomusa, @svakomtheofficial, SVAKOM Official, @svakom_usa
Safety and Usage Instructions
General Warning: Proper maintenance and care can extend the product's service life. Please read the following safety instructions carefully before use.
Before First Use:
- Clean the product thoroughly with antibacterial soap and warm water. Rinse and gently pat dry with a soft towel or cloth.
During Use:
- Do not use massage oil or hand cream as a lubricant.
- Do not use silicone-based lubricants as they can damage the silicone surface.
- Do not use cleaning agents containing alcohol, gasoline, or acetone.
- Avoid direct sunlight and prolonged exposure to high temperatures.
- Store the product in a clean, dry place, away from other plastic products.
Battery Maintenance:
- This product uses rechargeable batteries. A new battery reaches its full potential after two to three charge/discharge cycles.
- Batteries can be charged over 100 times but will eventually age. Disconnect the charger once fully charged to prevent overcharging, which can reduce battery life.
- Battery power may gradually decrease when the product is not in use.
- Extreme temperatures (hot or cold) can reduce battery capacity and lifespan.
Battery Warning:
- Improper use or damage to the battery may cause fire or chemical burns. Do not use a damaged battery, as it may explode.
- Dispose of batteries according to local regulations and recycle them whenever possible. Do not attempt to remove or replace the battery yourself, as this may damage the product.
Buttons and Functions
Buttons Display:
LED: Indicator light
"A" Key: Used for enhancing vibration.
"S" Key: Used for mode selection and app connection.
"V" Key: Used for weakening vibration.
Heating Key: Activates/deactivates the heating function.
Basic Button Functions:
- On/Off: Press and hold the "S" button for 2 seconds to turn the device on/off and connect to the app.
- S Mode: Click the "S" button (when not in S mode).
- Repeat S Mode: Double-click the "S" button (when in S mode).
- Enhance Vibration: Click the "A" key.
- Weaken Vibration: Click the "V" key.
- Enter Last Mode: Double-click the "A" key.
- Enter Next Mode: Double-click the "V" key.
- Heating On/Off: Press and hold the Heating Key.
Note: The heating function can be used even when the device is off, provided the internal battery has sufficient charge.
Vibration Modes
- Normal Mode
- Caressing Mode
- Joyous Mode
- Passionate Mode
- Climax Mode
- SVAKOM Mode (S Mode)
Status Display
| Status | Indicator Light |
|---|---|
| Vibrator OFF | White light flashes three times and turns off. |
| Low Battery | Red light flashes three times and turns off. |
| Charging Status | White light flashing (when connected to charger). |
| Charged Fully | Solid white light (when connected to charger). |
| Heating Status | Flashing red light. |
| Operation Status | Solid white light. |
Quality and Certifications
Quality Standard: Superior European and American Standards.
Material Safety: SVAKOM products are manufactured with environmentally friendly materials, including medical-grade silicone and ABS plastics, which are harmless to the human body.
International Certifications: SVAKOM products have passed EU ROHS certification and meet EU CE Directive and WEEE Directive standards. They are considered "Green Products" meeting official safety and environmental protection standards in Europe and North America.
EU CE Directive & WEEE Directive: These directives restrict hazardous substances in electronic products. ROHS (Restriction of Hazardous Substances) and WEEE (Waste Electrical and Electronic Equipment) ensure products are environmentally conscious.
EU CE Directive: Compliance with this standard allows manufacturers to apply the CE mark, signifying that the product meets EU safety requirements.
FCC Caution
This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement and can be used in portable exposure condition without restriction.
