1 Arm Cam Kit 9"
Single View 3 Channel 9" HD Monitor, 1 Arm Camera with Clamp Kit
JB-1A9D
Monitor
This 9" TFT LCD Digital 3-Channel Single View Color Monitor is capable of connecting and viewing up to 3 cameras. The Single View Color Monitor comes with built-in speakers and distance grid lines.
- Single View, can connect up to 3 Analog FHD cameras
- Built-in speakers for audio
- Adjustable distance grid lines for backing up reference
- Switch between mirror/normal image for any camera attached
Monitors Specs
| Screen Type | 9" TFT LCD |
| Camera Input | 3 Channel |
| Dot Resolution | 1024 X 600 (RGB) |
| Aspect Ratio | 16 x 9 |
| Contrast | 800 |
| Spot Distance | 0.1506 (H) x 0.1432 (V) mm |
| Refresh Frequency | 50Hz(P) 60Hz(N) |
| Color Display | RGB Stripe |
| Brightness | 400cd/m2 |
| Field of View | L:85 R:85 U:85 D:85 |
| Video Impedance | 1VP-P 750 |
| Video System | PAL/NTSC |
| Frame Rate | 25/30 fps |
| Mirror Function | Normal/Mirror (Left and right mirroring, up and down mirroring, individually) |
| Screen Mode | Single View |
| Trigger Mode | 3-way hardwired trigger |
| Language | OSD 9 languages |
| Video Input | AHD/1080P, AHD/720P, CVBS |
| Operating Voltage | Rated: 24V, range: 9V~32V |
| Operating Current | < 200mA/24V (without camera) |
| Operating Temperature/Humidity | -20°C~+70°C/45%~75% |
| Storage Temperature | -30°C~+85°C |
| Vibration Rating | 3G |
| Dimensions/Weight | 7.25" (H) x 9" (L) x 1.25 "(D) / 400g |
Arm Camera with Clamp
Keep it simple with the truck Arm Camera. The CA-ARMG1H is designed to fit onto the arm bracket of your truck, no drilling to attach the camera is necessary! This camera is equipped with a wide 120° viewing angle, a 2.8mm lens and 10 infra-red lights for excellent night vision. Completely waterproof with a IP68 rating, this camera also has a 10G vibration rating. This camera comes with two different clamp sizes. The larger clamp set has a maximum diameter of 4" and minimum diameter of 3". The smaller clamp set has a maximum diameter of 1.25" and a minimum diameter of 1".
Camera Specs
| Model | CA-ARMG1H |
| Sensor | 2MP pixel, 1/2.8" CMOS sensor |
| Maximum frame rate | PAL:25fps/s NTSC:30fps/s |
| Min Illumination | 1920 (H) x 1080 (V) |
| Electronic Shutter | Auto:PAL 1/50s (NTSC 1/60s)~1/100,000s |
| Backlight Compensation | Auto |
| Signal to Noise ratio | Better than 39dB |
| Audio output | Optional |
| IR Distance | 5M |
| Focus | 2.8MM M12, fix aperture F2.0, HFOV 120° |
| Waterproof grade | IP69 |
| Material | Metal & Plastic |
| Installation Placement | Side of the Vehicle - Side Mirror Bracket |
| Operating Temperature | -30°C~+70°C |
| Working Relative Humidity | 20% - 80% |
| Powered by | DC 12V ±10% |
| Weight | 400g |
Features
- CONVENIENT INSTALLATION: Easily fits onto the arm bracket of various trucks.
- SIMPLE INSTALL: No drilling necessary to mount the camera.
- 120° VIEWING ANGLE: With an ultra-wide viewing angle, and 2.8mm lens the side camera will provide a complete view from sides of your vehicle to ensure complete safety with no blind spots.
- NIGHT VISION: 10 infra-red lights support excellent night vision.
- COMMERCIAL GRADE: Completely waterproof camera with IP68 rating.
System Diagram
A diagram shows the connection of the monitor to the camera via extension cables. The monitor has inputs for 4-pin male and female connectors, labeled 'Left', 'Right', and 'Rear'. The camera also uses 4-pin male and female connectors.
