SONOFF S-MATE User Manual V1.2
This manual provides detailed information on the SONOFF S-MATE, a smart home device.
Product Introduction
Illustration showing the SONOFF S-MATE device with terminals labeled L, L1, L2, L3, S, S1, S2, S3.
The SONOFF S-MATE is a smart device designed for integration into smart home systems.
Diagram showing the S-MATE device with its Upper Cover detached, revealing the Battery Compartment. Another diagram shows the top view of the device, highlighting the Dip Switch and LED indicator.
The device weighs less than 1 kg. An installation height of less than 2 meters is recommended.
Features
- The S-MATE is an eWeLink-Remote sub-device.
- It connects with ordinary rocker or pulse switches.
- It allows local control of the gateway's on/off status when added to the gateway.
- It can trigger other smart devices within a smart scene via the cloud.
Operating Instruction
1. Pull out the battery insulation sheet
A three-step illustration guides the user through pulling out the battery insulation sheet from the S-MATE device.
2. Power off
An illustration depicts a power distribution box with four ON/OFF dip switches, indicating the need to power off the device before proceeding.
Important Safety Note: Please have the device installed and maintained by a professional electrician. To prevent electric shock hazards, do not connect any wires or touch terminal connectors while the device is powered on.
Wiring Instruction
Connecting the S-MATE with one MINIR3
Wiring diagram illustrating the connection between the SONOFF S-MATE, a SONOFF MINIR3, a 100-240V AC power source, and a rocker switch. Connections are shown for Neutral (N), Live (L), L_in, L_Out, S, S1, and L1 terminals.
Connecting the S-MATE with three MINIR3 units
Wiring diagram showing the S-MATE connected to three SONOFF MINIR3 units, a 100-240V AC power source, and a rocker switch. The diagram details the connections for multiple MINIR3 units.
Note on Dip Switch: The dip switch is factory set to the right. Toggle the dip switch to the left if you are connecting a pulse switch to the device.
Note on Terminals: The S-MATE features L, L1, L2, and L3 terminals that can be used as connection points. Alternatively, the L wire from the MINIR3 can be connected directly to the L wire in the switching box, bypassing the S-MATE.
Ensure that the neutral wire and live wire connections are made correctly.
Add to eWeLink-Remote Gateway
Illustrations from the eWeLink app interface showing the process of adding the S-MATE as a sub-device to a MINIR3. It also shows how to add the S-MATE to a Smart Scene to trigger other devices.
- You can add the S-MATE to devices with an eWeLink-Remote gateway, such as the MINIR3, via their respective setting pages.
- Add the S-MATE to a Smart Scene to trigger other smart devices.
Specifications
| Feature | Specification |
|---|---|
| Model | S-MATE |
| Input | 100-240V ~ 50/60Hz 16A Max |
| Output | 100-240V ~ 50/60Hz 16A Max |
| Power supply | 3V button cell x 1 |
| Battery model | CR2032 |
| "eWeLink remote" Transmission Distance | Up to 50M |
| Working temperature | -10°C~40°C |
| Shell material | PC V0 |
| Dimension | 51x44.5x24mm |
Replace Batteries
Illustration demonstrating how to open the SONOFF S-MATE casing to replace the battery.
Important: Please turn off the electricity supply before replacing the device's battery.
