Hunter Ceiling Fan Remote Wall Control

Models 99373, 99375

Hunter Fan Company Control, Limited Warranty

The Hunter Fan Company warrants the Control to the original purchaser to be free from defects in material and workmanship for one year from the date of sale. If the Control malfunctions or fails within the warranty period due to a defect in material or workmanship, Hunter Fan Company will replace it free of charge. This warranty is void if the original purchaser ceases to own the Control. This warranty is in lieu of all other express warranties. Any implied warranty of merchantability or fitness for a particular purpose is expressly limited to the one-year period of this express warranty. This warranty excludes malfunctions or failures caused by unauthorized repairs, mishandling, improper installation, modifications, damage while in possession, or unreasonable use. It does not apply to batteries or damage caused by faulty batteries. To obtain a replacement, return the Control postage prepaid with proof of purchase to Hunter Fan Company Service Department at 7130 Goodlett Farms Pkwy., Memphis, TN 38016. Hunter Fan Company shall not be liable for consequential or incidental damages. Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so these limitations may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Read and Save These Instructions

This product conforms to UL Standard 1917.

Warnings

This device complies with part 15 of the FCC Rules and RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If interference occurs, the user is encouraged to try to correct it by reorienting or relocating the receiving antenna, increasing the separation between the equipment and receiver, or connecting the equipment to an outlet on a different circuit. Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by Hunter Fan Company may void the user's authority to operate this remote control.

If installing multiple remote-controlled fans on the same circuit breaker, extra steps may be needed to prevent interference or faulty operation. Visit www.HunterFan.com/FAQs and click "How do I properly install multiple remote-controlled fans?" for more information.

Installation Instructions

1. Turning off the power

Before installation, use the pull-chains to set the fan speed to HIGH and the light to ON. Ensure the power is OFF at the outlet box and wall switch location before proceeding.

2. Removing the canopy

Remove the fan's canopy. If unsure how, refer to the fan's owner's manual. Note existing wire connections or take a photo. Remove wire connectors connecting the outlet box wires to the fan, leaving grounding wires connected.

3. Installing the receiver

Choose the hanging system that most closely resembles your fan's and install the receiver and wire as directed. Installation issues may occur on angled ceilings. For assistance, call 1-888-830-1326.

Diagram Description: The diagram shows several options for installing the receiver within the fan's canopy or ceiling plate, connecting it to the fan's wiring.

4. Wiring the receiver to the fan

Using the orange wire connectors:

• Connect the receiver's blue wire to the fan's blue wire (or possibly black with white stripe wire).
• Connect the receiver's yellow wire to the fan's black wire.

Note: If uncertain about wire colors or connections, contact a qualified electrician.

Diagram Description: A wiring diagram showing connections between the receiver (blue and yellow wires) and the fan (blue and black wires) using orange wire connectors.

Safety Warning: To avoid possible electrical shock, disconnect power at the circuit breakers before installing or servicing the fan. Use a warning device if circuit breakers cannot be turned off.

5. Wiring the receiver and fan to the ceiling

Using the orange wire connectors:

• Connect the black (ungrounded) wire from the ceiling to the receiver's black wire.
• Connect the white (grounded) wire from the ceiling to both the receiver's white wire and the fan's white wire.

After all wires are connected and secured, reinstall the canopy. Push wires carefully back into the ceiling electrical box, separating grounded and ungrounded wires.

Diagram Description: A wiring diagram illustrating the connection of ceiling wires (black and white) to the receiver (black and white wires) and the fan (white wire) using orange wire connectors.

6. Installing the battery

Slide the battery door up to access the battery compartment. Replace used batteries with two AAA batteries when needed.

7. Wiring the Wall Control

1. Connect the grounding wire from the wall control to the ground wire from the switch box using provided wire nuts.
2. Connect the "LIVE IN" wire from the switch box to the "~VAC" wire from the wall control using provided wire nuts.
3. Connect the "LIVE OUT" wire from the switch box to the "FAN" wire from the wall control using provided wire nuts.
4. Push all wires into the switch box.

8. Installing the Wall Control

Install the longer screws through the slots in the wall control into the switch box screw holes.

9. Installing the Wall Plate

Install the shorter screws through the wall control plate and into the screw holes in the wall control.

10. Turning on the power

IMPORTANT: Use the pull-chain switch on the fan to set the fan speed to the HIGH position before operation.

11. Reference the included remote function card for information on how to use your wall control!

Remote Function Guide