Lemorele Wireless Video Extender P200/P300 User Manual

Product Overview

The Lemorele P200/P300 is a wireless video extender designed for seamless wireless projection. It eliminates the need for complex setup, making it ideal for presentations, home entertainment, and various other scenarios. This device offers stable high-definition wireless transmission with low latency, simple operation, and a compact design.

Specifications

Product Structure and Buttons

Receiver (RX) Unit:

• ? HD Port: Connects to the display device.
• ? Power Port: USB-C port for power supply.
• ? Indicator Light: Shows the status of the device.
• ⚙️ Mode Button: Used for pairing and other functions.

Transmitter (TX) Unit:

• ? HD Port: Connects to the source device (e.g., laptop).
• ? Power Port: USB-C port for power supply.
• ? Indicator Light: Shows the status of the device.
• ⚙️ Mode Button: Used for pairing and other functions.
• ? HD-USB C: Connects to the source device.

Connection Diagram

The connection diagram illustrates how to set up the wireless video extender:

• Transmitter (TX): Connects to a source device, such as a laptop, via HDMI and USB-C power. The laptop screen displays a graph icon, indicating output.
• Receiver (RX): Connects to a display device, such as a TV or projector, via HDMI. The receiver unit is powered via USB-C.

Instructions for Use

1. Connect the Receiver: Insert the Receiver (RX) into the HDMI port of the display device and power it on. Press and hold the side function button for 5 seconds. Release when the pairing countdown appears on the display screen.
2. Connect the Transmitter: Connect the Transmitter (TX) to the computer or source device and power it on. Press and hold the function button for 5 seconds until the indicator light flashes rapidly.
3. Successful Pairing: Once pairing is successful, screen mirroring will be achieved.
4. Multiple Transmitters: Multiple transmitters can be paired separately. Follow steps 1 and 2 for each additional transmitter.

Pairing Steps

The devices are factory-paired at the factory. Manual operations are needed during pairing if connection fails.

1. Connect the Receiver to the HDMI port of the display device and power it on. Press and hold the side function button for 5 seconds and release when the pairing countdown appears on the display screen. (Diagram shows receiver connected to TV, with ⏳ Pairing... Timeout: 90s displayed).
2. Connect the Transmitter to the computer and power it on. Press and hold the function button for 5 seconds until the indicator light flashes rapidly. (Diagram shows transmitter connected to laptop via HDMI and USB-C power).
3. Press and hold the mode button for 5 seconds until the indicator light flashes rapidly. (Diagram shows transmitter connected to laptop, and receiver connected to TV, with indicator lights flashing).
4. Once pairing is successful, screen mirroring will be achieved. (Diagram shows laptop screen mirrored on TV).

Frequently Asked Questions (FAQ)

Q: Why is the projection not displayed correctly?

A: Please check if the transmitter and receiver are properly connected, and ensure that the device is powered on. Also, confirm that the signal source on the display device has been set to the correct HDMI port.

Q: What should I do if there is a delay during projection?

A: Ensure there are no obstructions between the transmitter and receiver, and to use the devices as close as possible. If the Wi-Fi signal is weak, signal interference is stable.

Q: What are the supported resolutions?

A: The current projector supports the following resolutions: 1152x864 / 1280x800 / 1280x1024 / 1024x768 / 800x600 / 720x576 / 1920x1080.

Q: How can I reset the device?

A: The product indicator icons, press and hold the mode button on the receiver for 15 seconds. Since the screen goes black and restarts, the device will be reset to factory settings.

Q: How do I enter privacy mode?

A: Briefly press the mode button on the transmitter to disconnect or reconnect.

Safety Precautions

• Do not use this product in environments with high temperature or high humidity.
• Avoid water, liquids, and other substances damaging the product to prevent short circuits or device damage.
• During use, do not flood/splash the HDMI ports or power outlets to avoid damaging the ports.

Customer Support

For assistance, you can contact Lemorele support by following these steps:

1. Select "New Orders" (or "Buy Now").
2. Select "Contact Seller" and then "Ask Questions".
3. Send an email to support@lemorele.com for further assistance.