Lemorele Wireless HD Transmitter & Receiver Kit
User Manual
Preface
Thank you for purchasing the Lemorele products. For details, please use the device with HD interface.
Connection Diagram
The connection diagram illustrates the setup for the Wireless HD Transmitter & Receiver Kit. The Receiver (RX) connects to a display device such as a TV, projector, or monitor using an HDMI cable. A power supply cable is connected to the Receiver. The Transmitter (TX) is shown, implying it connects to a source device for wireless transmission to the Receiver.
Pairing Instructions
Note: The device may have been paired previously. If it is not suitable for use, follow the re-pairing steps.
Re-pairing: Press and hold the receiver's function button for more than 3 seconds. The indicator light on the receiver will flash rapidly, and the transmitter's indicator light will also flash rapidly.
Successful Pairing: Once pairing is successful, the indicator light on the receiver will remain constantly lit, indicating a successful connection.
Question & Answer
How to restore factory settings?
Press and hold the receiver's function key for 10 seconds. After a black screen appears with the indicator light of the receiver flashing in a fast rhythm, it means that the factory settings have been restored.
Why can't I mirror?
Please check if the transmitter indicator is always flashing. If the transmitter indicator is always flashing, it may indicate insufficient voltage. Ensure the device has an adequate power supply, potentially using an HD interface converter if required.
Accessories List
The document mentions an accessories list. While specific items are not detailed in the provided text, typical accessories for such kits include the transmitter unit, receiver unit, power adapters, and necessary cables.
Brand Information
Brand Owner: Shenzhen Qixing Longyuan Technology co, Ltd
Address: Inhal Bay, RD. Tarving, Dist. Bao'an, Shenzhen City, Guangdong Province, China
Support Email: support@lemorele.com
Model/Version Identifier: 4.0002.0195
