PowerBolt USB Battery User Manual

Safety Notice

Class III Symbol

A Class III appliance is designed to be supplied from a separate/safety extra-low voltage (SELV) power source. The voltage from a SELV supply is low enough that under normal conditions a person can safely come into contact with it, without the risk of electrical shock. The extra safety features built into Class I and Class II appliances are, therefore, not required. For medical devices, compliance with Class III is not considered sufficient protection, and further more-stringent regulations apply to such equipment.

Technical Data

Barrier Protecting Your Machine

FK Irons strongly suggests the use of barrier products to protect your machine. For a visual demonstration of barrier protection methods, please visit the FK Irons YouTube channel.

This device is only for use by trained tattoo artists and not for use by children or persons of reduced physical, sensory, or mental capabilities.

The PowerBolt

Lightning Intro

Unleash Your Power. The PowerBolt is the first USB battery attachment featuring complete Bluetooth connectivity, offering a new sense of freedom.

Overview

The PowerBolt features Dynamic Power Path Management and a USB-C Li-ion Battery.

Key Components:

• LED Indicator
• Voltage Guide
• Control Buttons ([voltage up arrow], [voltage down arrow], [power button])
• USB-C Port
• Compact Battery Housing
• Bluetooth Enabled (Pair with Darklab app)

Specifications

• Output Voltage: 5 - 12 V
• Increment/decrement voltage interval: 0.5 V
• Maximum output current: 1 A
• Charger Input: USB-C / 1.5 A
• Size: H57mm x W30mm x L27mm
• Weight: 58g (2 oz)
• Battery Life: Average of 5-6 Hours (dependent on functional preferences)

Dimensions: Approximately 30mm width and 57mm height.

Features

The PowerBolt

LED Indicator

Solid Color: Indicates whole voltage value (e.g., Solid green indicates 10V).

Blinking Color: Indicates half increment (e.g., Flashing green indicates 10.5V).

Battery Level Check

Press and hold the [power button] until the light turns white. A blinking colored light indicates remaining charge.

Note: The LED flashes while the battery charges. Once the charge is below 15%, the red light will blink alternately with the voltage.

Charge Level Indicators:

• 100-98%: White
• 97-60%: Green
• 59-40%: Yellow
• 39-15%: Red
• 14-0%: Red blinking

Working with Modes

Modes are activated by pressing and releasing the [power button].

Bluetooth

To activate pairing mode: Hold the [power button] until a blue light appears, then immediately release. A blue blinking light indicates pairing mode is available for 60 seconds. To deactivate Bluetooth, hold the [power button] and release when the yellow light flashes.

Travel Mode (Shutdown)

To activate: Press and hold the [power button] until the red light flashes. This mode is for avoiding unnecessary discharge or complying with travel laws. To reactivate, connect or disconnect to a USB-C port.

Reset (Factory Settings)

If abnormal behavior occurs, hold the [power button] and the [voltage down arrow] simultaneously, then quickly release.

Device reset: [power button] + [voltage down arrow]

Detaching the PowerBolt

The PowerBolt is compatible with the Spektra Flux and the EXO tattoo machines.

To detach:

1. Ensure a firm grip on the machine's body and the PowerBolt's grip.
2. Turn the PowerBolt counter-clockwise and pull it out.

To attach:

1. Push the PowerBolt in while twisting clockwise.
2. Ensure the lock mechanism moves freely.

Important: The PowerBolt must sit correctly to ensure power leads align properly. Avoid contact with the PowerBolt leads while recharging or servicing.

eGive

eGive Adjustment

This feature allows control over the "give" or resistance of the needle upon impact with the skin. This enables artists to achieve specific results based on the softness or hardness of the hit. Setting 0 provides no effect, while setting 5 offers the maximum amount of eGive.

How to Check the Current eGive Setting

1. Hold down the [power button] until the light changes from white to solid blue.

2. Release the [power button].

3. The following blinking color of the LED indicates the current eGive setting:

• White blink: Lowest Give (0)
• Yellow blink: Level 1 eGive
• Orange blink: Level 2 eGive
• Red blink: Level 3 eGive
• Pink blink: Level 4 eGive
• Green blink: Level 5 eGive (softest setting)

Changing eGive

To raise or lower the give:

1. Hold down the [power button] until the light changes from white to solid blue.
2. Release the [power button].
3. Immediately use the [voltage up arrow] or [voltage down arrow] to change the eGive level. The LED colors will update accordingly.

eGive Levels:

• White: eGive of 0
• Yellow: Level 1 eGive
• Orange: Level 2 eGive
• Red: Level 3 eGive
• Pink: Level 4 eGive
• Green: Level 5 eGive (softest setting)

Additional Information

Voltage Parameters

While voltage is a parameter that varies among artists, the PowerBolt has been tested to operate at a minimum voltage of around 5-Volts with a maximum voltage of 12-Volts. Artists can adjust the voltage to achieve desired performance based on their needle configuration or brand. Note that some machines require a minimum voltage to operate correctly; consult your machine manufacturer's requirements.

Warranty

Darklab warrants that the device will perform efficiently when used as intended. Should this product prove to be defective due to manufacturing issues, Darklab will repair or replace the device free of charge. This warranty is void if the device shows signs of tampering, disassembly, rough handling, dropping, exposure to moisture, or damage resulting in compromised functionality.

Handy Tips

• Do not exceed the suggested voltage.
• Use only quality cables for a consistent performance.
• Use only FDA-approved cold sterilization solutions for disinfection.
• The device is NOT AUTOCLAVABLE.

Troubleshooting

1. Machine Manufacturer

FK Irons: 1771 NW 79th Avenue, Doral, Florida 33126

2. Servicing Your Machine

As with any mechanical device, FK Irons strongly suggests annual servicing to ensure all working parts function as expected. This includes internal machine cleaning and fresh lubrication, ensuring optimal condition and longevity. Routine servicing is subject to fees.

3. Warning

Disconnect the machine from any power source before making any adjustments.

For service inquiries, please contact service@fkirons.com.

For additional tips and tutorials, visit the FK Irons YouTube channel: youtube.com/fkirons.