Deli Electronic Password Series Safes
User's Manual
Welcome to use Deli series products of safes (cabinets) and safe deposit boxes. Please read the instruction manual carefully before use, and operate correctly according to the instructions.
1. Product Unpacking
Check that product appearance is intact after unpacking the box and checking all accessories. Please contact the dealer if anything is broken or missing.
- Instruction manual [1]
- Main lock keys [2]
- Emergency keys [2]
- Expansion bolt [2]
- External battery compartment [1]
- Internal door keys [2] (Remark: For products without internal door products inside the box, there is no internal door keys attached.)
- 5# battery [4]
2. Product Schematic
Front view:
- 1. Serial Number
- 2. Box Panel
- 3. Handle
Side view (with door open):
- 4. Reset Key
- 5. Backside Cover
- 6. Internal battery compartment
Panel layout:
- 1. Display screen
- 2. Keys
- 3. Main lock slide cover
- 4. Main lock
- 5. Emergency lock
- 6. External power supply socket
3. First Use
- Push the door lock slide cover down to the limited position.
- Insert one of the door lock keys and one of the emergency keys into the corresponding key hole, respectively. Turn the emergency key clockwise, then turn the door lock key clockwise to open the door. (For products without a handle, turn the door lock key clockwise to open the door).
4. Battery Installation
- Put four 5# batteries into the internal battery compartment located on the backside of the door according to the correct polarity. A "beep" will sound after power is supplied.
- Enter the factory password "12345678".
- Press the key "#" to confirm, and the display shows "OPEN". Turn the handle clockwise within 6 seconds to open the door.
5. Password Setting
- Enter the factory password "12345678". The door will open after the display shows "OPEN". Set a new password within 30 seconds.
- Press the Reset key on the door backside cover. The display shows "set".
- Enter a 1-8 digit password.
- Press the key "#" to confirm. The display shows "into1", indicating the new password is set.
Tip: Verify the new password and then lock the door after confirmation.
6. Door Closing Operation
- Close the door.
- (a) For products with a handle: turn the handle counterclockwise, then turn the door lock key counterclockwise and pull it out.
- (b) For products without a handle: turn the door lock key counterclockwise and pull it out.
7. Hidden Code Function
In standby state, pressing "#" and entering the password displays "--" instead of digits. The digit display automatically restores after this function is turned on.
8. Deleting Incorrect Password
If an incorrect password is entered, use the "*" key before pressing "#" to confirm. Pressing "*" once deletes the entire line of entered password. Enter the correct password again to open the door.
9. Alarm Function
Wrong password alarm: Display shows "Error" for each incorrect password. Alarms for 50 seconds if entered incorrectly three consecutive times. Entering the correct password stops the alarm.
Vibration alarm: Turned on when display shows "ALERT ON" (by pressing "*" in standby). Alarms for 50 seconds when vibrated by external force. Entering the correct password stops the alarm and turns off the vibration alarm function.
10. Battery Replacement
Display shows "Lo bat" when battery voltage is insufficient. Replace with new batteries (5# alkaline batteries recommended) as soon as possible.
11. Emergency Opening
Provide power using the external battery compartment when batteries are depleted and operation cannot be made. Insert plug into power supply socket below the panel and enter the correct password. Use the emergency key to open the door if the electronic system fails or the password is forgotten. The procedure is the same as the first use.
12. Precautions for Use
- Do not store user manual, door lock keys, emergency keys, and external battery compartment inside the box; store them in a safe place.
- Remove batteries if the product is left unused for a long time to prevent leakage damage.
- Always fix the cabinet to a solid concrete wall for safe keeping.
- Do not store excessive cash and valuables when unattended or without a remote alarm device.
(Installation layout diagram described)
13. Common Faults and Troubleshooting
| Symptoms | Causes | Troubleshooting |
|---|---|---|
| No response when pressing number keys or fingerprint head | Batteries depleted | Use external battery or emergency key, replace batteries. |
| No response when pressing number keys or fingerprint head | Battery polarity reversed | Insert batteries properly. |
| No response when pressing number keys or fingerprint head | Circuit board failure | Contact maintenance department. |
| Emergency key cannot be inserted/removed | Foreign objects in key hole | Remove foreign objects. |
| Emergency key cannot be inserted/removed | Key not turned to limit | Reinsert correctly. |
| Door cannot be opened after electronic/fingerprint lock opened | Handle not turned to limit | Turn handle to limit. |
| Door cannot be opened after electronic/fingerprint lock opened | Electronic lock reset (handle turned >7s) | Enter password, turn handle within 6 seconds. |
| Alarm does not sound | Batteries depleted | Replace batteries. |
| Alarm does not sound | Battery polarity reversed | Insert batteries correctly. |
Product Warranty Card
Commodity Information:
- Commodity Name: [Field left blank in PDF]
- Commodity Model: [Field left blank in PDF]
Company Information:
- Company Name: DELI GROUP CO., LTD.
- Address: Deli Industrial Park, Ninghai, Zhejiang
- Service Hotline: 400-185-0555
- Website: https://www.nbdeli.com
- Made in China
Customer Information:
- Name: [Field left blank in PDF]
- Address: [Field left blank in PDF]
- Phone: [Field left blank in PDF]
Sales Information:
- Seller Name: [Field left blank in PDF]
- Address: [Field left blank in PDF]
- Contact: [Field left blank in PDF]
- Phone: [Field left blank in PDF]
- Sales Date: [Field left blank in PDF]
- Invoice No.: [Field left blank in PDF]
Maintenance Record:
- Fault Description: [Field left blank in PDF]
- Maintenance Result: [Field left blank in PDF]
- Customer Signature: [Field left blank in PDF]
- Maintenance Person Signature: [Field left blank in PDF]
- Date: [Field left blank in PDF]
Product Code: [Field left blank in PDF]
No.: [Field left blank in PDF]
Version: 2.0
Date: August of 2017
Dear users: Thank you for purchasing our products. In order to ensure the interests of users, all users who purchase our products can contact the local dealer or special maintenance station by the proof of invoice and warranty card if the product fails due to quality problems.
Warranty notice:
- If the product fails under normal use within one year from the date of purchase by the user, the company will provide free repair, parts replacement and other services according to the failure situation.
- This warranty card and purchase invoice are the proofs that the company provides after-sales service to customers. Please fill out the following form on this card, and it will be valid only after the dealer affixes the official seal.
- In one of the following cases, free repair service is not provided, and it will be charged for maintenance:
- (1) The validity period of the warranty has expired.
- (2) Damage caused by improper use, maintenance or storage not in accordance with the requirements of the product instruction manual.
- (3) Product failure or damage caused by force majeure.
- (4) Wear parts or accessories.
This card comes together with the product, and one card for one machine. In order to ensure that you have full right to the free repair service provided by the company, please keep this card properly, and you cannot get another copy if you lose it.
Purchase Date: _____(mm/dd/yyyy)
得力集团有限公司
