HOMCOM 921-763V00/921-763V70 Office Chair

Important Information

Please retain this information for future reference. Read carefully.

Safety Information

• Intended Use: This product is intended for indoor use only, for work and study.
• Maximum Weight: 180 KG
• To prevent the chair from falling, ensure weight is evenly distributed.
• Before assembly, remove all parts from the box and verify that all parts are included.
• Always keep your feet on the floor and do not press your head on the headrest when reclining.
• When adjusting the backrest, ensure your fingers are safe and out of harm's way.
• To avoid damage, never pull the chair quickly or forcefully.
• This chair is designed for sitting only.
• Do not use it as a base or as a ladder.
• Do not sit on the arms of the chair.
• This chair is designed for one person at a time.
• If any parts are missing, damaged, or worn, stop using the product immediately.
• Avoid direct sunlight on the chair to prevent plastic components from becoming brittle.
• Warning: Replacement or repair of height adjustment components with energy storage must only be performed by trained personnel.

Maintenance Instructions

• Clean with a vacuum cleaner.
• Wipe with a fabric dampened with water.

Parts List

Parts:

• A: Backrest (x01)
• B: Seat Cushion (x01)
• C: Armrests (x01 pair)
• D: Mechanism (x01)
• E: Gas Lift (x01)
• F: Gas Lift Cover (x01)
• G: Chair Base (x01)
• H: Casters (x05)
• I: Lumbar Pillow (x01)
• J: Bracket (x01)

Hardware:

• K: Screws 6*20mm (+1 spare) (x12)
• L: Screws 6*25mm (x04)
• M: Screws 8*20mm (x03)
• N: Allen Wrench (x01)

Note: Do not confuse similar screws.

Assembly Instructions

1. Step 01: Attach casters (H) to the chair base (G). Insert the gas lift (E) and its cover (F) into the center of the base (G).
2. Step 02: Attach the seat cushion (B) to the backrest (A) using screws (K). Attach the armrests (C) to the seat cushion (B) using screws (K).
3. Step 03: Attach the mechanism (D) to the underside of the seat cushion (B) using screws (K).
4. Step 04: Attach the bracket (J) to the backrest (A) using screws (L). Then, attach the assembled backrest unit to the seat unit using screws (M).
5. Step 05: Place the assembled seat unit onto the chair base with the gas lift.

Assembly is now complete. Enjoy your chair!

Contact Information

For any questions, please contact the customer care center:

• US: 001-877-644-9366, customerservice@aosom.com
• CA: 416-792-6088, customerservice@aosom.ca
• DE: +49 40 87408465, service@aosom.de
• IT: 0039-0249471447, clienti@aosom.it
• ES: 0034-931294512, atencioncliente@aosom.es
• PT: 0034-931294512, info@aosom.pt
• UK: 0044-800-240-4004, enquiries@mhstar.co.uk
• FR: 0033-1-84166106, aosom@mhfrance.fr