Guess Script Metal Logo Headphones

Introduction

This document provides instructions and specifications for the Guess Script Metal Logo headphones.

Diagram and Controls

The headphones feature the following controls:

• 1: '+' Button
• 2: Multifunction Button (MFB)
• 3: '-' Button
• 4: USB-C Port

First Use

Before first use, fully charge the headphones. To enter pairing mode, press and hold the MFB button for 6 seconds. The LED indicator will turn blue for 2 seconds, then flash blue and red rapidly. On your device, turn on Bluetooth, search for "GUESS HEADPHONE", and select it to pair.

Controls

• Power On: Press and hold the MFB button for 3 seconds.
• Power Off: Press and hold the MFB button for 3 seconds.
• Play/Pause: Press the MFB button.
• Volume Up: Press the '+' button.
• Volume Down: Press the '-' button.
• Next Track: Press and hold the '+' button.
• Previous Track: Press and hold the '-' button.
• Answer/End Call: Press the MFB button.
• Reject Call: Press and hold the MFB button for 2 seconds.
• Voice Assistant: Double-press the MFB button.

LED Indicator

• Pairing Mode: Flashes blue and red.
• Successful Pairing: Flashes blue slowly.
• Charging: Solid red light.
• Fully Charged: Light turns off.

Specifications

• Bluetooth Version: V5.3
• Frequency Range: 20Hz - 20kHz
• Battery Capacity: 300 mAh
• Charging Time: Approximately 2 hours
• Music Playback Time: Up to 30 hours
• Charging Connector: USB-C