Your GUESS Watch User Guide

Contents

• About Your Watch

• Warranty

• Watch Care

• Battery

• Movements:

  • Simple Time / Mini Sweep

  • Date / Day And Date

  • Multi-function Day/Date/Pusher

  • Multi-function Day/Date/24 Hour/Pusher

  • Multi-function Date

  • Multi-function Day/Date/24 Hour

  • Chronograph 1/1 sec.

  • 6 (date) 9 (24hr) 12 (day)

  • 6 (date) 9 (24hr)

  • 3 (24hr) 6 (Stop Watch Sec) 9 (Stop)

  • Solar Series 3 Hands

  • 6 (Stop Watch Sec) 9 (Stopwatch Min)/3 Date

  • Interchangeables

• Watch Repair

• Customer Service

About Your Watch

Congratulations on purchasing your GUESS watch. Please read these instructions carefully to understand how to operate your GUESS timepiece. Your watch may not have all of the features described in this booklet.

For additional information, please visit GUESSWatches.com

Key Components of your GUESS Watch:

• Bracelet or Strap: The part that secures the watch to your wrist.
• Lugs: The points where the strap or bracelet attaches to the watch case.
• Dial: The face of the watch displaying the time.
• Subdial: Smaller dials on the watch face used for chronograph functions or other indicators.
• Case: The main body of the watch that houses the movement.
• Bezel: The ring around the watch crystal, which may be fixed or rotatable.
• Crown: The knob used to set the time, date, and other functions.
• Hands: The hour, minute, and second hands that indicate the time.

Warranty

U.S. Customers

GUESS offers a Two Year Warranty on all purchases made from July 1st, 2017. Purchases made prior to July 1st, 2017, are covered by a 10 Year Limited Warranty. In the event of a defect or malfunction within the warranty period, your watch will be repaired or replaced at GUESS's option. The limited warranty does not cover normal wear and tear, abuse, water damage, or damage from external sources. It also excludes batteries, case, strap, or bracelet, and does not cover labor, parts, or shipping costs. Proof of purchase is required for all warranty repairs. For more information, U.S. customers should contact GUESS Watches.

International Customers

For customers outside the U.S., please contact your local representative for country-specific warranty information. You can find a list of global representatives at GUESSWatches.com.

Your GUESS or Gc watch is covered by an international guarantee against manufacturing defects for 24 months from the date of purchase. Defective parts will be repaired or replaced at no charge. The international guarantee does not cover defects arising from damage, mishandling, abusive use (including exposure to moisture for non-water-resistant watches), alteration, or repairs performed by unauthorized retailers. To maintain your guarantee, always have your watch checked, serviced, and repaired by an authorized GUESS or Gc Agent.

Watch Care

Do

• Use a soft tissue to clean the case and crystal of your timepiece.
• If the case and crystal are very dirty, use a soft tissue dipped in soapy water.

Do Not

• Clean a leather strap with anything other than clean water.
• Use chemical products like petroleum spirits to clean your timepiece.

It is preferable to avoid wearing your GUESS watch to the beach or during extreme sports to prevent knocking or scratching. Repeated contact with perfumes, cosmetics, or household detergents may damage your timepiece.

Watches will withstand water resistance if the crystal, crown, push buttons, case, and gaskets remain intact. DO NOT operate the crown or buttons when the watch is wet or submerged.

A hard knock might cause the watch to lose its water-resistance. If you plan to use your watch underwater, it is essential to have the water-resistance checked at least every 12 months. If the case needs to be opened for any reason, ask your GUESS agent to check the waterproof seals for the case back, glass, and crown, and replace them if necessary.

Battery

Battery life typically ranges from 2 to 4 years, depending on the model and usage. Many GUESS quartz watches with a center seconds-hand feature an End-of-Life (EOL) battery warning system. Approximately two weeks before the battery depletes, the center seconds-hand will jump every four seconds, indicating a low battery. Replace the battery immediately to prevent potential damage to the movement.

It is strongly recommended to have the battery replaced by a retailer or jeweler. If applicable, push the reset button when replacing the battery. The battery type is indicated on the caseback. Battery life estimates are based on usage assumptions and may vary.

WARNING: INGESTION HAZARD

• This product contains button cell or coin batteries.
• DEATH or serious injury can occur if ingested.
• Swallowed batteries can cause severe internal chemical burns in as little as 2 hours.
• KEEP new and used batteries OUT OF REACH of CHILDREN.
• Seek immediate medical attention if a battery is suspected to be swallowed or inserted into any part of the body.

• Remove and dispose of used batteries according to local regulations, keeping them away from children. Do NOT dispose of batteries in household trash or incinerate them.
• Even used batteries can cause severe injury or death.
• Call a local poison control center for treatment information.
• Battery types include Lithium Metal (CRXXXX series) or Silver Oxide (SRXXXXX Series).
• Nominal battery voltage: Lithium Metal (CRXXXX series) 3.0 V or Silver Oxide (SRXXXXX Series) 1.5 V.
• Non-rechargeable batteries are not to be recharged.
• Do not force discharge, recharge, disassemble, heat above specified temperatures (Lithium Metal: 158°F/70°C; Silver Oxide: 140°F/60°C), or incinerate batteries, as this may result in injury due to venting, leakage, or explosion.
• Ensure batteries are installed correctly according to polarity.
• Do not mix old and new batteries, or batteries of different brands or types (e.g., alkaline, carbon-zinc, rechargeable).
• Remove and recycle or dispose of batteries from equipment not used for an extended period according to local regulations.
• Always secure the battery compartment completely. If it does not close securely, stop using the product, remove the batteries, and keep them away from children.

Movements

Simple Time / Mini Sweep

To set the time:

1. PULL out the crown to the B position.
2. TURN the crown either way to correct the time.
3. Push the crown back to the A position.

Note: The mini sweep subdial measures seconds.

Crown Positions:

• A: Normal position
• B: Time setting position

Date / Day & Date

To set the time:

1. PULL out the Crown to the C position.
2. TURN the Crown either way to correct the time.
3. PUSH the Crown to the A position.

To set the calendar / date:

1. PULL out the Crown to the B position.
2. TURN the Crown away from you to correct the date.
3. TURN the Crown towards you to correct the day.
4. PUSH the crown to the A position.

NOTE: The date changes automatically every 24 hours. On "Day & Date" watches, the days of the week are displayed in English + French. Once set in English, the consecutive days will continue to be in English.

Crown Positions:

• A: Normal position
• B: Date setting position
• C: Time setting position

Multi-function Day/Date/Pusher

Display

The watch face includes an hour hand, minute hand, second hand, day hand, date hand, and a 24-hour indicator.

Crown and button operation

How to set time

1. Pull the crown out to the 1st click position when the second hand is at the 12 o'clock position.
2. Turn the crown to set the hour and minute hands. Consider the AM/PM setting. When setting the minute hand, advance it 4 to 5 minutes ahead of the desired time, then turn it back to the exact time.
3. Push the crown back to the normal position.

How to set date and day of the week

• Day Correction: With each press of button A, the day hand advances one day.
• Date Correction: With each press of button B, the date hand advances one day.
• Do not set the date and day hands between 9:00 p.m. and 4:00 a.m., as they may not change properly.

Multi-function Day/Date/24 Hour/Pusher

Display

The watch face includes an hour hand, minute hand, second hand, day hand, date hand, and a 24-hour hand.

Crown and button operation

How to set time

1. Pull the crown out to the 1st click position when the second hand is at the 12 o'clock position.
2. Turn the crown to set the hour and minute hands. Consider the AM/PM setting. The 24-hour hand moves with the hour hand; ensure it is set correctly. When setting the minute hand, advance it 4 to 5 minutes ahead of the desired time, then turn it back to the exact time.
3. Push the crown back to the normal position.

How to set date and day of the week

• Day Correction: With each press of button A, the day hand advances one day.
• Date Correction: With each press of button B, the date hand advances one day.
• Do not set the date and day hands between 9:00 p.m. and 4:00 a.m., as they may not change properly.

Multi-function Date

Display

The watch face includes an hour hand, minute hand, second hand, and date hand.

Crown operation

How to set time

1. Pull the crown out to the 2nd click position when the second hand is at the 12 o'clock position.
2. Turn the crown to set the hour and minute hands. Consider the AM/PM setting. When setting the minute hand, advance it 4 to 5 minutes ahead of the desired time, then turn it back to the exact time.
3. Push the crown back to the normal position.

How to set date

1. Pull the crown out to the 1st click position.
2. Turn the crown counterclockwise to set the date hand. Do not set the date hand between 9:00 p.m. and 1:00 a.m., as it may not change properly. The date hand will not move backward by turning the crown clockwise.
3. Push the crown back to the normal position.

Multi-function Day/Date/24 Hour

Display

The watch face includes an hour hand, minute hand, second hand, day hand, date hand, and a 24-hour hand.

Crown operation

How to set time and day of the week

1. Pull the crown out to the 2nd click position when the second hand is at the 12 o'clock position.
2. Turn the crown clockwise to advance the hour and minute hands until the day hand is set to the desired day of the week. The day hand will not move backward by turning the crown counterclockwise. To advance the day hand quickly, turn back the hour and minute hands 4 to 5 hours beyond the day change point (between 11:00 p.m. and 4:00 a.m.), then advance them again until the day hand is set to the next day.
3. Turn the crown to set the hour and minute hands. Consider the AM/PM setting. The 24-hour hand moves correspondingly with the hour hand; ensure it is set correctly. When setting the minute hand, advance it 4 to 5 minutes ahead of the desired time, then turn it back to the exact time.
4. Push the crown back to the normal position.

How to set date

1. Pull the crown out to the 1st click position.
2. Turn the crown counterclockwise to set the date hand. Do not set the date hand between 9:00 p.m. and 1:00 a.m., as it may not change properly. The date hand will not move backward by turning the crown clockwise.
3. Push the crown back to the normal position.

Chronograph 1/1 sec. chronograph

Display

The watch face includes an hour hand, minute hand, second hand, stopwatch second hand, stopwatch minute hand, and a date indicator.

Crown and button operation

How to set time

1. Pull the crown out to the 2nd click position when the second hand is at the 12 o'clock position. If the stopwatch is measuring, pulling the crown to the 2nd click position will automatically reset the stopwatch hands to the "0" position.
2. Turn the crown to set the hour and minute hands. Consider the AM/PM setting. When setting the minute hand, advance it 4 to 5 minutes ahead of the desired time, then turn it back to the exact time.
3. Push the crown back to the normal position.

How to set date

1. Pull the crown out to the 1st click position.
2. Turn the crown to set the date. Do not set the date between 9:00 p.m. and 1:00 a.m.
3. Push the crown back to the normal position.

Tips: When the date changes during daytime, it happens when AM/PM is wrongly set. Advance the hour hand by 12 hours.

How to use stopwatch function

• The stopwatch can measure up to 29'59" in one-second increments.
• When the measurement reaches 30 minutes, the stopwatch automatically stops counting.

Standard measurement

Press Button A to Start, Button A to Stop, Button B to Reset.

Accumulated elapsed time measurement

Press Button A to Start, Button A to Stop, Button A to Restart, Button A to Stop, Button B to Reset. Restart and stop can be repeated by pressing Button A.

Split time measurement

Press Button A to Start, Button B to Split, Button B to Split release, Button A to Stop, Button B to Reset. Measurement and release of split time can be repeated by pressing Button B.

Measurement of two competitors

Press Button A to Start, Button A to record the finish time of the 1st competitor, Button B to indicate the 2nd competitor finishes, Button A to record the finish time of the 2nd competitor, Button B to Reset.

• The stopwatch second hand can time up to 30 minutes (60 seconds x 30 times).
• The stopwatch minute hand can time up to 30 minutes.
• Before using the stopwatch, ensure the crown is in the normal position and all stopwatch hands are reset to "0". If hands do not reset correctly, follow the "Stopwatch hand position adjustment" procedure.

Stopwatch hand position adjustment

If the stopwatch hands are not in the "0" position:

1. Pull the crown out to the 2nd click position. The stopwatch will automatically reset.
2. Press Button A or B to set the stopwatch hands to the "0" position. The minute and second hands are interlocked. To set the minute hand to "0", move the second hand until the minute hand reaches "0". Hands move quickly if buttons are kept pressed.
3. Push the crown back to the normal position.

Power depletion warning function

When the battery is low, the second hand moves at two-second intervals instead of one-second intervals. Have the battery replaced as soon as possible. The watch remains accurate during this mode, but the stopwatch will not operate. If the second hand starts moving at two-second intervals during stopwatch measurement, the measurement resets, and the hands return to "0".

6 (date) 9 (24hr) 12 (day)

DISPLAY AND CROWN / BUTTON OPERATION

The watch face includes an hour hand, minute hand, second hand, stopwatch 1/10 second hand, stopwatch minute hand, stopwatch second hand, and a date indicator.

ADJUSTING THE STOPWATCH HAND POSITION

Before setting the time, ensure the stopwatch 1/10 second, second, and minute hands are at the "0" (12 o'clock) position. If the stopwatch is in use, press the button in the following order to reset it and check if the hands return to "0".

• If the stopwatch is counting: Press A then B.
• If the stopwatch is stopped: Press B.
• If the split time is displayed: Press B then A then B.

If any stopwatch hands are not in the "0" position, follow this procedure:

1. Pull the crown out to the second click.
2. Press button A or B to reset the stopwatch 1/10 second, second, and minute hands to "0" position. Pressing button A moves the hands counter-clockwise; pressing button B moves them clockwise. The stopwatch minute hand moves correspondingly with the stopwatch second hand.
3. Push the crown back to the normal position.

TIME SETTING

1. Pull out the crown to the first click.
2. Turn the crown clockwise until the previous day's date appears.
3. Pull out the crown to the second click when the second hand is at the 12 o'clock position. It will stop, and you can advance the hour and minute hands by turning the crown. Check that the AM/PM is set correctly.
4. Push the crown back to the normal position in accordance with a time signal.

*When the crown is at the second click position, do not press any button, otherwise the chronograph hands will move.

*Do not set the date between 9:00 P.M. and 1:00 A.M. Otherwise, the day may not change properly. If it is necessary to set the date during this time period, first change the time to any time outside this range, set the date, and then reset the correct time.

HOW TO USE THE STOPWATCH

The measurement time is indicated by stopwatch hands that move independently of the center and 24-hour hands. The stopwatch can measure up to 60 minutes in second. The watch indicates the measured time in second increments, ignoring the 1/10 seconds obtained.

Standard measurement

Ex) 100m race: Press A (START), A (STOP/Finish), B (RESET to "0'00").

Accumulated elapsed time measurement

Ex) Basketball game: Press A (START/Start of game), A (STOP/Time out), A (RESTART/Restart of game), A (STOP/Game over), B (RESET). Restart and stop can be repeated by pressing A.

Split time measurement

Ex) 5,000m race: Press A (START), B (SPLIT), B (SPLIT RELEASE), A (STOP), B (RESET). Measurement and release of split time can be repeated by pressing B.

*The stopwatch second hand can time up to 30 minutes (60 seconds x 30 times).

*The stopwatch minute hand can time up to 30 minutes.

6 (date) 9 (24hr)

DISPLAY AND CROWN / BUTTON OPERATION

The watch face includes an hour hand, minute hand, stopwatch minute hand, second hand, stopwatch second hand, and a 24-hour hand.

ADJUSTING THE STOPWATCH HAND POSITION

Before setting the time, check if the stopwatch second and minute hands are at the "0" (12 o'clock) position. If the stopwatch is in use, press the button in the following order to reset it, and then check if the hands return to "0" position.

• If the stopwatch is counting: A then B.
• If the stopwatch is stopped: B.
• If the split time is displayed: B then A then B.

If any stopwatch hands are not in the "0" position, reset them using the following procedure:

1. Pull out the crown.
2. Press button A or B to reset the stopwatch second and minute hands to "0" position. Pressing button A moves the hands counter-clockwise; pressing button B moves them clockwise.
3. Push the crown back to the normal position.

TIME SETTING

1. Pull out the crown to the second hand position when the second hand is at the 12 o'clock position. The second hand will stop.
2. Turn the crown to set the hour, minute, and 24-hour hands to the desired time. As the hour hand moves, the 24-hour hand also moves correspondingly. When setting the hour hand, check that the 24-hour hand is set correctly.
3. Push the crown back to the normal position in accordance with a time signal.

*Do not press any button when the crown is at the second click position, otherwise the chronograph hands will move.

*Do not set the date between 9:00 P.M. and 1:00 A.M. Otherwise, the day may not change properly. If it is necessary to set the date during this time period, first change the time to any time outside it, set the date, and then reset the correct time.

HOW TO USE THE STOPWATCH

The measurement time is indicated by stopwatch hands that move independently of the center and 24-hour hands. The stopwatch can measure up to 60 minutes in second. The watch indicates the measured time in second increments by ignoring off the 1/10 seconds obtained.

Standard measurement

Ex) 100m race: Press A (START), A (STOP/Finish), B (RESET to "0'00").

Accumulated elapsed time measurement

Ex) Basketball game: Press A (START/Start of game), A (STOP/Time out), A (RESTART/Restart of game), A (STOP/Game over), B (RESET). Restart and stop can be repeated by pressing A.

Split time measurement

Ex) 5,000m race: Press A (START), B (SPLIT), B (SPLIT RELEASE), A (STOP), B (RESET). Measurement and release of split time can be repeated by pressing B.

3 (24hr) 6 (STOP WATCH Sec) 9 (STOP)

DISPLAY AND CROWN / BUTTON OPERATION

The watch face includes an hour hand, minute hand, stopwatch minute hand, second hand, stopwatch second hand, and a 24-hour hand.

ADJUSTING THE STOPWATCH HAND POSITION

Before setting the time, check if the stopwatch second and minute hands are at the "0" (12 o'clock) position. If the stopwatch is in use, press the button in the following order to reset it, and then check if the hands return to "0" position.

• If the stopwatch is counting: A then B.
• If the stopwatch is stopped: B.
• If the split time is displayed: B then A then B.

If any stopwatch hands are not in the "0" position, reset them using the following procedure:

1. Pull the crown out to the second click.
2. Press button A or B to reset the stopwatch second and minute hands to "0" position. Pressing button A moves the hands counter-clockwise; pressing button B moves them clockwise.
3. Push the crown back to the normal position.

TIME SETTING

1. Pull out the crown to the first click.
2. Turn the crown clockwise until the previous day's date appears.
3. Pull out the crown to the second click when the second hand is at the 12 o'clock position. It will stop, and you can advance the hour and minute hands by turning the crown. Check that the 24-hour hand is set correctly.
4. Push the crown back to the normal position in accordance with a time signal.

*When the crown is at the second click position, do not press any button, otherwise the chronograph hands will move.

*Do not set the date between 9:00 P.M. and 1:00 A.M. Otherwise, the day may not change properly. If it is necessary to set the date during this time period, first change the time to any time outside it, set the date, and then reset the correct time.

HOW TO USE THE STOPWATCH

The measurement time is indicated by stopwatch hands that move independently of the center and 24-hour hands. The stopwatch can measure up to 60 minutes in second. The watch indicates the measured time in second increments by ignoring off the 1/10 seconds obtained.

Standard measurement

Ex) 100m race: Press A (START), A (STOP/Finish), B (RESET to "0'00").

Accumulated elapsed time measurement

Ex) Basketball game: Press A (START/Start of game), A (STOP/Time out), A (RESTART/Restart of game), A (STOP/Game over), B (RESET). Restart and stop can be repeated by pressing A.

Split time measurement

Ex) 5,000m race: Press A (START), B (SPLIT), B (SPLIT RELEASE), A (STOP), B (RESET). Measurement and release of split time can be repeated by pressing B.

Solar Series 3 Hands

Display

The watch face includes an hour hand, minute hand, and second hand.

Crown operation

How to set time

1. Pull the crown out to the 1st click position when the second hand is at the 12 o'clock position.
2. Turn the crown to set the hour and minute hands. When setting the minute hand, advance it 4 to 5 minutes ahead of the desired time, then turn it back to the exact time.
3. Push the crown back to the normal position.

6 (STOP WATCH Sec) 9 (STOPWATCH Min) / 3 Date

Battery consumption can be minimized by pulling out the stem.

Setting the Time and Day

Setting the Date

DO NOT set Day and Date between 9:00pm - 1:00am.

Interchangeables

How to remove straps and metal bands

Step 1: Remove the strap from the buckle by putting the case into the spring bar through the spring bar. Push upward from both sides of the end piece to remove.

Step 2: Engage the groove with the spring bar on the case end piece to attach the bracelet to the case.

Step 3: Push the bar at the end of the metal band into the notch on the watch.

Step 4: Place the pin in the hole and push the lever to the left.

To remove metal bands: Push the center button while gently pulling out the metal band.

To replace straps: Push the lever left to replace the strap.

How to replace top rings

Step 1: Turn the top ring counter-clockwise to remove it.

Step 2: Lift off the bracelet/strap.

Step 3: Place straps on the watch, turn the top ring clockwise to secure.

To replace top rings: Remove the top ring by turning counter-clockwise. Place the top ring on the watch and turn clockwise to secure.

Watch Repair

U.S. Only

For watch repair in the U.S., visit sequelrepair.com/guess-watch-repair.aspx.

For questions, contact GUESS at 1.800.248.377 (1.800.2GUESS5). Hours of Operation: Monday - Thursday, 8 AM - 5 PM EST; Friday, 8 AM - 12 PM EST. Email: support@guesswatches.com.

Customers Outside The U.S.

For customers outside the U.S., please visit GUESSWatches.com for global representatives.

Customer Service

Contact GUESS at 1.800.248.377 (1.800.2GUESS5). Hours of Operation: Monday - Thursday, 8 AM - 5 PM EST; Friday, 8 AM - 12 PM EST. Email: support@guesswatches.com.

For customers outside the U.S., please visit GUESSWatches.com for global representatives.