Outdoor Metal Swirl Chair
This instruction booklet contains important safety information. Please read and keep for future reference.
Before You Start
- Please read all instructions carefully.
- Retain instructions for future reference.
- Separate and count all parts and hardware.
- Read through each step carefully and follow the proper order.
- It is recommended that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
- Always place the product on a flat, steady and stable surface.
- Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.
Parts List
The following parts are included:
- Part A: Backrest (x1)
- Part B: Seat (x1)
- Part C: Front Frame (x1)
- Part D: Side Frame (x1)
- Part E: Swivel Base (x1)
- Part F: Swivel Plate (x2)
- Part G: Bolts (quantity not specified in diagram)
- Part H: Screws (quantity not specified in diagram)
- Part I: Washers (quantity not specified in diagram)
- Part J: Nuts (quantity not specified in diagram)
- Part K: Bolts (quantity not specified in diagram)
- Part L: Washers (quantity not specified in diagram)
- Part M: Nuts (quantity not specified in diagram)
Assembly Instructions
Follow these steps to assemble your chair:
- Attach Part D (Side Frame) to Part C (Front Frame).
- Attach Part B (Seat) to the assembled frame.
- Attach Part A (Backrest) to the seat and frame assembly.
- Attach Part F (Swivel Plate) to the underside of the seat using Parts H (Screws) and Parts I (Washers).
- Attach Part E (Swivel Base) to the Swivel Plate (F) using Parts K (Bolts), Parts L (Washers), and Parts M (Nuts). Ensure all connections are secure.
Return / Damage Claim Instructions
English Instructions:
- DO NOT discard the box / original packaging.
- In case a return is required, the item must be returned in its original box. Without this, your return will not be accepted.
- Take a photo of the box markings.
- A photo of the markings (text) on the side of the box is required in case a part is needed for replacement. This helps staff identify your product number to ensure you receive the correct parts.
- Take a photo of the damaged part (if applicable).
- A photo of the damage is always required to file a claim and get your replacement or refund processed quickly. Please make sure you have the box even if it is damaged.
- Send an email with the requested images.
- Email directly from the marketplace where your item was purchased with the attached images and a description of your claim.
Instructions en Français:
- NE PAS jeter la boîte/l'emballage d'origine.
- Dans le cas où un retour est requis, l'article doit être retourné dans sa boîte d'origine. Sans cela, votre retour ne sera pas accepté.
- Prenez une photo des marquages de la boîte.
- Une photo des marquages (texte) sur le côté de la boîte est requise au cas où une pièce serait nécessaire pour le remplacement. Cela aide le personnel à identifier votre numéro de produit pour s'assurer que vous recevez les bonnes pièces.
- Prenez une photo des dommages (le cas échéant).
- Une photo des dommages est toujours requise pour déposer une réclamation et obtenir rapidement votre remplacement ou votre remboursement. Assurez-vous d'avoir la boîte même si elle est endommagée.
- Envoyez-nous un e-mail avec les images demandées.
- Envoyez-nous un e-mail directement depuis le marché où votre article a été acheté avec les images ci-jointes et une description de votre réclamation.
For assistance, please contact:
Email: eva@monightsllc.com
Phone: (978)248-8126
