CEILING FAN Installation Instruction

SAFETY INFORMATION

Please read all safety information and instructions before installing the ceiling fan and save this manual for future reference.

Installation Location

Ensure the following clearances:

• 20 inches (50 cm) from the blade tip to the wall.
• 7.6 feet (2.3 m) above the floor.

General Warnings

⚠️ WARNING

• Do not install the fan with wet hands.
• Do not insert foreign objects between the rotating fan blades.
• Do not bend the fan blades when installing or cleaning the fan.
• Do not disassemble or modify this product or use non-original parts without permission.
• Keep children away from your working area.
• Properly dispose of the fan's packaging material.
• Make sure the ceiling fan is firmly secure to the ceiling. Double check all connections before you restore power.
• Turn off the fan and wait for the blades to stop completely before performing any maintenance or cleaning.

PRE-INSTALLATION

Tools Required (Not Included)

• Power Drill [?]
• Screwdriver [?]
• Step Ladder [?]
• Wire Stripper [✂️]
• Electrical Tape [?]

Parts List

• Mounting Bracket x 1
• Coping x 1
• Motor x 1
• Fan Blades x 3
• Balance Kit X 2
• Expansion Bolt X 4
• Blade Screw X 7
• Self-tapping Screw X 4
• Remote Bracket Screw X 2
• Receiver X 1
• Remote Control X 1
• Wireless Switch X 1 (This accessory is only available when purchasing a dual control model)

INSTALLATION INSTRUCTION

Step 1: Mounting Bracket Installation

Concrete Ceiling

1. Drill holes with an electric drill (Ø8 mm).

2. Use expansion screws to fix the mounting bracket to the ceiling.

Wooden Ceiling

Fasten the mounting bracket to the ceiling with self-tapping screws.

Step 2: Fan Blade Installation

Fix the ceiling fan blade, align it with the center hole, and tighten the screws on the ceiling fan blade.

Step 3: Remove the screws on the motor head

Remove the screws securing the motor head before proceeding.

Step 4: Install a ceiling mounted clock

Install the ceiling mounted clock component.

Step 5: Hang the fan on the hanging disc hook

Carefully hang the fan assembly onto the designated hanging disc hook.

Step 6: Wiring Instruction

⚠️ Shut off the power to the fuse box or circuit breaker before wiring.

Connect the power supply wires (White Neutral wire, Green Ground wire, Black Live wire) to the receiver using wire nuts. The receiver connects to the motor power cord and the ceiling power cord. Place the receiver into the coping.

Step 7: Load into the card slot and rotate

Load the fan assembly into the card slot and rotate to secure.

Step 8: Tighten the four mounting screws on the mounting bracket

Securely tighten the four mounting screws on the mounting bracket.

OPERATION INSTRUCTION

Control Method

Remote Control

Features:

• Light ON/OFF
• Fan ON/OFF
• Speed Levels (1-6)
• Timing Control (2H, 4H, 6H)
• Direction of the fan (Forward/Reverse)

Code Matching for Remote Control:

1. Turn off the power for 10 seconds.
2. Press and hold the "Turn on/off" (light) and "Stop" (fan) buttons simultaneously.
3. Turn on the power. The fan will pair successfully after hearing two beeps.

Wireless Switch

Features:

• Turn on/off the light
• Turn on/off the fan
• Increase the speed of the fan
• Decrease the speed of the fan
• Increase the timing time
• Decrease the timing time
• Direction of the fan (Forward/Reverse)

Code Matching for Wireless Switch:

1. Turn off the power for 5 seconds.
2. Press and hold the "Light ON/OFF" and "Timer OFF" buttons simultaneously.
3. Turn on the power. The fan will pair successfully after hearing two beeps.

Note: Sensing Distance: 33 ft - 49 ft (10 m - 15 m). The direction of the fan can be changed using the Reverse Switch.

Reversible Function

Summer (Forward):

A downward airflow creates a cooling effect.

Winter (Reverse):

An upward airflow increases the indoor temperature.

PS: If you want to change the fan's rotation direction, please press the button while the fan is running.

Timing Control

• 2H: The fan will automatically shut off after two hours.
• 4H: The fan will automatically shut off after four hours.
• 6H: The fan will automatically shut off after six hours.
• Close the Timing Control: Press the "FAN ON/OFF" button.

SPECIFICATIONS

TROUBLESHOOTING

The Fan Does Not Respond to the Remote Control.

• Check that all wire connections are correct and secure.
• Verify that the power is turned on and reaching the receiver.
• Verify that the batteries of the remote control are installed with the correct polarity, making sure to install the + (positive) end of the batteries on the solid end and the - (negative) end on the spring.

The Fan Makes a Humming Noise.

• Make sure the controls you use are supplied with your fan.
• Make sure all accessories are securely fastened. Loose parts often cause a vibrating noise or buzzing sound.
• Disassembling the fan and reinstalling it can sometimes remedy this resonant vibrating noise.

The Fan Makes a Repetitive Ticking Noise.

• Check for obstructions in the rotor path.
• Make sure mounting hardware at the ceiling is firmly fastened.
• Make sure all other hardware and blade attachments are tight.
• Give the fan a "Break in Period" of a few hours to a few days, then repeat the steps above.

The Fan Wobbles.

• Make sure the mounting plate and hardware at the ceiling are firmly fastened.
• Make sure all screw fittings on the fan are tight.
• If necessary, use the self-tapping screws provided to further secure the bracket to the joist.

CONTACT INFORMATION

We want to hear your voice! Feel free to touch base if you encounter any issue when using our product(s) or want to know more about our brand. We will be more than happy to provide top-notch pre-sales & after-sales service.

Email: 2272667708@qq.com