Crosley CR6034A Switch II Turntable Instruction Manual

Product Overview

This document provides comprehensive instructions for the Crosley CR6034A Switch II Turntable. It covers essential safety precautions, detailed setup procedures, operation guidelines, maintenance tips, and troubleshooting advice for this versatile audio system, which features a turntable, Bluetooth connectivity, and AM/FM radio.

For assistance with questions, problems, or missing parts, please contact Crosley Customer Service at 1-888-CROSLEY. Service is available Monday through Friday, 8 a.m. to 6 p.m. EST. You can also find more information and support on the official website: www.crosleyradio.com.

Safety Instructions

Read and understand this entire manual before using this product. Keep these instructions for future reference.

1. Do not use this product near water.
2. This product should be operated only by the type of power source indicated on the marking label or in this instruction manual.
3. Do not defeat the safety purpose of the polarized plug. A polarized plug has two blades with one blade wider than the other. This plug will fit into the power outlet only one way. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician.
4. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit the product.
5. Do not overload wall outlets, extension cords, or integral convenience receptacles, as this can result in a risk of fire or electric shock.
6. Never push objects of any kind into this product through openings, as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
7. Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
8. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
9. Do not use attachments not recommended by the product manufacturer, as they may cause hazards.
10. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.
11. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating. Do not block or cover these openings.
12. Unplug the product during lightning storms or when unused for long periods of time.

Items in Package

Before discarding any packaging materials, please check thoroughly and make sure you find the following items that come along with this package:

• Turntable
• Speakers
• Turntable slip mat
• 45 RPM adapter
• Speaker wire
• 3.5mm aux in cable
• Power adaptor

Please contact Crosley customer service if any accessory is missing from the package. Retain the original packaging materials for exchange or return purposes.

Specifications

Design and specifications are subject to change without notice.

To help save power consumption, some models comply with the ERP energy saving standard. When there is no audio input for 20 minutes, their power will automatically cut-off. To turn power back on and resume playing, you will need to turn off the power and turn it on again.

Product Description and Components

The Crosley CR6034A Switch II Turntable system comprises a main unit housing the turntable mechanism, controls, and radio tuner, accompanied by two external speakers. The system is designed for versatile audio playback.

Key Components:

1. Speaker: Provides audio output.
2. Power / Volume Knob: Controls the unit's power and audio volume.
3. Speed Switch: Selects the turntable playback speed (33⅓ or 45 RPM).
4. Function Switch: Selects the audio source (e.g., PHONO, AUX, Bluetooth, FM, AM).
5. Headphone Jack: For connecting standard headphones.
6. Aux In Jack: A 3.5mm input port for connecting external audio devices such as smartphones or MP3 players.
7. Tuning Knob: Used to adjust the radio station frequency for AM and FM broadcasts.
8. Turntable Platter: The rotating disc where records are placed.
9. Turntable Spindle: The central post that secures the turntable platter and record.
10. Pitch Control: Allows for fine adjustment of the turntable's rotational speed, typically by +/- 10%.
11. Cue Lever: A mechanism to safely lift and lower the tonearm onto the record.
12. Tonearm Rest: A designated place to park the tonearm when not in use.
13. Hold Down Clip: Secures the tonearm to the base, preventing damage during transport.
14. Tonearm: The arm that holds the stylus and tracks the record groove.
15. Spring clip speaker terminals: Connectors for attaching speaker wires to the main unit.
16. Power Jack: The input port for the AC power adapter.
17. 45 RPM Adapter: A small adapter placed on the spindle to play records with larger center holes (45 RPM singles).

Initial Setup

Essential Setup

1. Place the unit on a flat, level, and stable surface that is free from vibration to ensure optimal performance.
2. Remove the tie-wrap that is securing the tonearm during shipping.
3. Place the provided slip mat onto the turntable platter.
4. Connect the speakers to the spring clip speaker terminals located on the back or side of the turntable unit.
5. Connect the AC power adapter to the Power Jack on the unit.

Important: Do not plug the AC power adapter into a wall outlet until all assembly and connections are completed. Double-check all connection settings before turning the power on. Always ensure the unit is powered off when connecting or disconnecting cables.

Stereo System Connection

The spring clip speaker terminals are designed to deliver amplified, speaker-level signals. Connect these terminals to your passive speakers using appropriate speaker wire.

Aux Input Connection

To play audio from an external device (e.g., smartphone, MP3 player) through the unit's speakers:

1. Rotate the Function Knob to select the 'Aux In' mode.
2. Connect one end of a 3.5mm auxiliary cable to your audio device and the other end to the Aux In Jack on the unit.
3. Start playback on your external audio device.

Turntable Operation

1. To turn the unit on, rotate the Power / Volume Knob.
2. Set the Function Switch to the 'PHONO' position.
3. Set the Speed Switch to match the speed of your record (33⅓ RPM for LPs, 45 RPM for singles).
4. Place the record onto the turntable platter. Use the 45 RPM Adapter if the record has a large center hole.
5. Carefully remove the stylus protector from the stylus assembly. (Note: To prevent stylus damage, ensure the stylus guard remains in place whenever the turntable is being moved or cleaned.)
6. Release the tonearm from the Hold Down Clip. (Note: When the turntable is not in use, remember to secure the tonearm by locking the hold-down clip back.)
7. Use the Cue Lever to gently lift the tonearm.
8. Carefully move the tonearm over the desired starting point on the record. Set the Cue Lever to the down position; the tonearm will descend slowly onto the record, initiating playback.
9. When the record finishes playing, use the Cue Lever again to raise the tonearm. Return the tonearm to the Tonearm Rest and release the lever. To temporarily suspend playback, repeat these steps.
10. Secure the tonearm by locking it to the Tonearm Clip.

Pitch Control

The turntable speed can be fine-tuned by approximately 10% using the Pitch Control Knob. Rotate the knob clockwise to increase the speed, and counter-clockwise to decrease it.

Needle Replacement

Removing the Needle

1. Gently pull down the front edge of the needle.
2. Pull the needle forward.
3. Pull out and remove the needle from the cartridge.

Installing a New Needle

1. Position the new needle with its tip facing downwards.
2. Align the back of the needle with the cartridge.
3. Insert the needle, starting with its front end at a downward angle, and gently lift the front of the needle upward until it securely snaps into place. (SNAP!)

Radio Operation

1. Set the Function Switch to either the 'FM' or 'AM' position.
2. Rotate the Tuning Knob to select your desired radio station.

The unit is equipped with a FM wire antenna. For optimal FM reception, adjust the position of the wire antenna until the signal is clear and free from interference. Do not connect any external antenna.

The AM antenna is integrated within the unit. If AM reception is poor, try rotating the entire unit to find a better signal.

Bluetooth Operation

1. Turn the Function Switch to 'Bluetooth' mode [Bluetooth Symbol]. An activation sound will confirm the mode change.
2. On your audio device (e.g., smartphone, tablet), enable Bluetooth and search for available devices. Select "CROSLEY CR6034" from the list to pair.
3. Upon successful pairing, the unit will play a short confirmation sound.
4. You can now play and stream music wirelessly from your paired device to the unit's speakers.

Note: Bluetooth version - 4.2

Turntable Maintenance

1. Avoid touching the stylus tip with your fingers. Be careful not to bump the stylus against the turntable mat or the edge of a record.
2. Clean the stylus regularly using a soft brush, moving it only from back to front.
3. To remove dust or grease from records, use a dedicated record cleaning brush and cleaning solution.
4. Clean the turntable lid and turntable cabinet with a slightly damp microfiber cloth.

Important: Do not use cleansers containing alcohol, benzene, or other harsh chemicals, as these may damage the turntable's paint and finish.

Crosley offers a range of cleaning accessories. For more information, please consult your retailer or visit the Crosley website: www.crosleyradio.com.

Troubleshooting

No Power

• Verify that the power adapter is correctly connected to both the unit and the power outlet.
• Ensure there is power available at the electrical outlet being used.
• Note on Power Saving: Some models comply with the ERP energy saving standard. If no audio input is detected for 20 minutes, the unit will automatically enter a low-power state. To resume playback, turn the unit off and then back on again.

Power is On, But the Platter Does Not Turn

• Confirm that the correct turntable mode (e.g., PHONO) has been selected using the Function Switch.
• Check if the turntable's drive belt has slipped off or is broken.

Turntable is Spinning, But There is No Sound, or Sound is Not Loud Enough

• Ensure the stylus protector has been removed from the stylus assembly.
• Check if the tonearm is lifted by the Cue Lever.
• Verify that headphones are not plugged into the Headphone Jack, as this will mute the speakers.

FCC Statements

FCC Caution

1. This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

2. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

3. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio TV technician for help.