Snap-on BT Karaoke Microphone SSX22P157
User Manual
Important Safety Information
Warning and reminder:
- To reduce the risk of fire or electric shock, do not expose this product to moisture or rain.
- Do not place the product near any open flame.
- Only use the supplied charger to charge.
- Do not leave charging for more than 3 hours.
- Do not use the product to hit something.
- Do not disassemble, repair, or modify by yourself.
- Please properly dispose of battery and old electronic parts.
- This product uses a rechargeable internal battery; the battery cannot be disassembled.
- Please charge once a month to extend the battery life, even if you do not use the product.
Product Overview
The Snap-on BT Karaoke Microphone SSX22P157 is a versatile device for karaoke enthusiasts. It features Bluetooth connectivity, TF card playback, and various operational functions.
The product is designed and engineered in the U.S.A. and made in China. Snap-on and Wrench "S" are trademarks of Snap-on Incorporated and used under license. ©2022 Snap-on Incorporated.
For more information, visit www.snapon.com.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
Function Key Introduction and Interface Function Definition
The microphone features several controls and ports:
- 1. Microphone Volume: Adjusts the microphone's volume.
- 2. Echo: Controls the echo effect.
- 3. Power ON/OFF: Press and hold to turn the device on or off.
- 4. Mode Button (M): Short press to switch between Bluetooth and TransFlash (TF) modes. Double press to pair with another Snap-on Bluetooth Karaoke Microphone.
- 5. Previous Song: Short press to select the previous song. Long press to decrease the main volume.
- 6. Play/Pause: Short press to play or pause music. Long press to eliminate the original singing voice.
- 7. Next Song: Short press to select the next song. Long press to increase the main volume.
- 8. TransFlash (TF) card socket: Supports MP3 format tracks. Insert a TF card with downloaded files here.
- 9. Micro 5V charging port: Connect the charging cable here.
- 10. Charging indicator: A red light indicates charging; the light turns off when fully charged.
- 11. Mobile phone holder: Pull out the holder, open the stand, and insert your phone.
- 12. Microphone: The main microphone unit.
Operating Manual
Bluetooth Connection:
Long press the power button (③) to turn on the microphone. It will enter Bluetooth mode. Turn on Bluetooth on your device (e.g., mobile phone) and select "SO BT Karaoke Microphone". You will hear "Bluetooth Connected" when pairing is successful.
Bluetooth Pairing:
- To pair two Snap-on® Bluetooth Karaoke Microphones, ensure both are disconnected from any Bluetooth devices.
- Turn on both microphones. Rapidly double-click the Mode button (④) on one microphone after entering Bluetooth mode. A "Dong" tone indicates connection, which may take up to 30 seconds. They are now paired.
- On your device's Bluetooth settings, search for the microphone's pairing name and connect. You can connect both paired microphones through your device's settings.
- To disconnect pairing, turn off Bluetooth mode on your device, then double-click the Mode button (④) to hear a "DingDong" tone.
TransFlash (TF) Card Socket:
Insert a TF card with MP3 files into the TF card socket (⑧) to play your music. Switch between Bluetooth and TF modes by short pressing the Mode button (④).
Eliminate the Human Voice:
Long press the play/pause button (⑥) to remove the original singing voice. Long press the same button again to return the voice.
Charging Operation:
Use the supplied charging cable. Insert the USB end into a DC5V charger and connect the Micro USB end to the microphone's charging port (⑨). The charging indicator (⑩) will be steady red while charging and turn off when fully charged.
Specifications
- Output Power: THD=1%, 5W×1
- Bluetooth version: 5.3
- Speaker unit: 50mm rubber side, 4Ω 5W
- Diaphragm Specifications: 50mm, 1.5mm thick iron sheet, 55 degrees rubber side
- Frequency response: 100Hz-12KHz
- Pickup: Capacitive
- Echo: PT2399
- Battery Specifications: Built-in 18650 / 1500mA.h 3C lithium-ion
- Charging voltage: DC5V / 1A (Common with mobile phone adapter)
- Full charge time: About 3 hours
- Product weight: 450g
- Product Size: 85mm×(H)197mm
Accessories
- Microphone: 1pcs
- USB Cable: 1pcs
- User Manual: 1pcs