With the new adapter plate, installing the KeContact P40 becomes even easier. Whether replacing an existing KeContact P30 or setting up a new installation with top cable entry, the adapter plate ensures a quick, clean, and flexible solution.
Typical Use Cases
Replacement Installation from KeContact P30 to KeContact P40
- Uses existing drill holes of the KeContact P30
- No new drilling required
- Quick and neat upgrade
Diagram Description: Illustrates the replacement process. The sequence shows a KeContact P30 unit mounted on a wall, then removed to reveal existing drill holes. The adapter plate is then mounted using these same holes, followed by the KeContact P40 being attached to the adapter plate, ensuring a seamless upgrade.
New Installation with Top Cable Entry
- Insert the cable from above
- Hidden routing between adapter plate and P40
- Ideal for underground car parks and concealed cabling
Diagram Description: Depicts a KeContact P40 unit with the adapter plate installed. A cable is shown entering from the top, routed discreetly between the adapter plate and the KeContact P40 unit, facilitating a clean and concealed cable management solution.
Your Benefits at a Glance
- Flexible use for new and existing installations
- Reduced installation effort
- Clean and discreet appearance
- Maximum flexibility in cable routing
Discover the new adapter plate for KeContact P40 now and make your installation easier than ever.
More Information:
https://www.keba.com/en/emobility/products/accessories
For more details, visit: www.keba.com/emobility
