Legrand Connected Lighting Micromodule 5742 43

Introduction

This product is a connected accessory. It requires the Arteor with Netatmo connected starter pack to be purchased and installed first.

Pack Contents

The pack contains one (x 1) Connected lighting micromodule.

The connected lighting micromodule is a compact, rectangular device with multiple connection terminals and indicator lights on its surface.

Characteristics

Notes:

• (*) Or 10 lamps maximum. For comfortable lighting, it is recommended to use bulbs of the same type and brand.
• (**) Ferromagnetic transformers must be charged to more than 60% of their power. When calculating the permissible power, the ferromagnetic transformer efficiency must be taken into account.

Before You Start: Wiring Precautions

To install or replace a latching relay, use only this product.

You can retain existing push buttons or replace them with wireless controls.

⚠ Do not use: a connected switch (with dimmer option) to control a connected lighting micromodule.

Controlling Your Micromodule

The micromodule can be controlled via the Legrand Home+Control application. For enhanced functionality, it is recommended to combine it with at least one additional wireless lighting control and/or a mechanical push button.

To create a wireless lighting two-way switch: Add one or several wireless lighting controls from the "... with Netatmo" connected ranges.

Installation Guide

1. Install the Connected Lighting Micromodule

The Arteor with Netatmo connected lighting micromodule can be easily installed in a ceiling light or in wall lights.

1. Step 1: Switch OFF the power at the main circuit breaker. [Power Off Symbol] 0 OFF

2. Step 2: Wire the connected lighting micromodule.

   The wiring diagram shows the connected lighting micromodule. It illustrates connections for Neutral (blue wire), Live (wire of any color except blue and green/yellow), and Earth (green/yellow wire) to the module and then to a light fixture. An optional remote control wiring setup is also depicted, using a non-illuminated mechanical pushbutton, with a maximum cable length of 30 meters (Max. 30 m) and a limit of 5 such pushbuttons (x 5 Max.).

   ⚠ Safety Reminder: Make sure that the power is off before continuing with the installation.

   Technical Specifications:

   • Frequency bands: 2.4 - 2.4835 GHz
   • Power level: < 100 mW

2. Add a Connected Product to Your Installation

Follow these instructions:

• In the Legrand Home + Control application (Settings/Add a new product section).
• Or consult the user manual on legrand.fr.

Reference: www.legrand.fr/reference/574243

Contact: LEGRAND - Pro and Consumer Service - BP 30076, 87002 LIMOGES CEDEX FRANCE. Website: www.legrand.com.

Safety Instructions

This product must be installed in compliance with installation rules, preferably by a qualified electrician. Incorrect installation and/or incorrect use can lead to the risk of electric shock or fire. Read the instructions and consider the product's specific mounting location before installation. Do not open, dismantle, alter, or modify the device unless specifically required by the instructions. All Legrand products must be opened and repaired exclusively by personnel trained and approved by Legrand. Any unauthorized opening or repair voids all liabilities and rights to replacement and guarantees. Use only Legrand brand accessories.

Simplified EU Declaration of Conformity

The undersigned, Legrand, declares that the radio-electric equipment referred to in these instructions complies with directive 2014/53/EU. The full text of the EU declaration of conformity is available on the following website: www.legrandoc.com.