Victrola Retro Bluetooth FM/AM Radio (VRS-2800)
Product Overview
This section details the Victrola Retro Bluetooth FM/AM Radio, model VRS-2800. The device features a retro wooden design with a prominent tuning dial, three control knobs, and a speaker grill. It offers FM/AM radio reception and Bluetooth connectivity.
Front View Controls:
- 1. AM/FM scale
- 2. AM/FM pointer
- 3. TUNING knob
- 4. Speaker Grill
- 5. OFF/Volume control knob
- 6. Power/ LED Indicator
- 7. Adjustable Tone Control Knob (Bass and Treble)
- 8. AM/FM / BT Knob (Function Selector)
Rear View:
- 9. FM Antenna
- 10. AC power cord (plugs into a wall outlet)
Safety Instructions
To prevent fire or shock hazard, do not use the plug with an extension cord or outlet unless blades can be fully inserted. Do not expose the appliance to rain or moisture.
- Read and keep instructions for future reference.
- Heed all warnings.
- Do not use near water.
- Clean only with a dry cloth.
- Do not block ventilation openings.
- Install according to manufacturer instructions, away from heat sources.
- Protect the power cord from being walked on or kinked.
- Use only manufacturer-specified attachments/accessories.
- Unplug during lightning storms or long periods of disuse.
- Refer servicing to qualified personnel.
- Do not overload wall outlets; use only the indicated power source (120V AC mains).
Warning Symbols:
- ⚡ (Lightning flash with arrowhead): Alerts to the presence of uninsulated "dangerous voltage" that may pose a risk of electric shock.
- ❗ (Exclamation point): Alerts to important operating and maintenance instructions.
Important Notes
Avoid installing the unit in places exposed to direct sunlight, heat radiating appliances, areas lacking ventilation, dusty areas, or areas subject to constant vibration and/or humid or moist conditions. Do not clean with chemical solvents. Ensure the AC power cord is plugged in before turning on. Disconnect the power cord before moving the unit.
Power Source
This product is designed to operate on 120V 60Hz AC Mains only. Attempting to operate from any other power source may cause damage not covered by warranty. The system is equipped with a domestic standard AC power 2-prong plug. If the plug does not fit your outlet, do not attempt to modify it; consult a qualified electrician to change the outlet.
Image Description: An illustration showing an AC plug with one wider blade and an AC outlet, highlighting the polarized nature of the plug.
Specifications
General
| Power Requirements | AC 120 V~60Hz |
| Power Consumption | 7W |
| Dimensions (L x H x D) | 9.4 in x 4.9 in x 6.1 in (approx) / 240mm x 125mm x 155mm (approx) |
| Weight | 2.86 lbs (approx) / 1.30 Kg (approx) |
Speaker System
| Type | 1-Way |
| Impedance | 4 ohms |
| Output power | 3W |
Radio
| FM Range | 87-108 MHz |
| AM Range | 530-1710 KHz |
Bluetooth
| Bluetooth Version | Bluetooth V4.1 |
| Bluetooth Profile | A2DP, AVRCP1.4 |
| Bluetooth Frequency Range | 2.40~2.48GHz |
| Operating Distance | 10 meters |
Troubleshooting
| Symptom | Possible Cause | Solution |
|---|
| Unit will not power on. | Unit is unplugged. | Connect the unit to the AC power supply. |
| No sound output from speakers. | Volume level is too low. Input selector does not match playback source. | Adjust the volume. Select the correct input source. |
| Noise/Distortion in sound output. | Unit too close to TV or interfering device. External factors (e.g., ESD). | Turn off interfering device and relocate unit. Disconnect power cord, wait one minute, then reconnect. |
| Unit fails to respond. | External factors (e.g., ESD). | Disconnect power cord, wait one minute, then reconnect. |
| Cannot listen to any station, or signal appears weak. | Station not tuned properly. Nearby TV interfering. Antenna not oriented properly. | Tune properly. Turn off interfering TV. Re-orient antenna. |
| The sound is distorted. | Antenna not oriented properly. | Re-orient the antenna until reception improves. |
| Bluetooth - No Sound. | Unit not in BT mode. Volume low on device or unit. Device too far or obstructed. | Ensure unit is in BT mode. Move Bluetooth device closer. Turn up volume on both devices. Turn off/on both devices. |
| Bluetooth - Sound has a lot of static. | Device too far away. | Bring your device closer to the unit. |
| Bluetooth - Unable to pair with a Bluetooth device. | Device too far away. Device does not have Bluetooth connectivity. Bluetooth pairing not successful. | Confirm device compatibility. Re-pair the unit and device. |
Victrola Vintage 3-Speed Bluetooth Portable Suitcase Record Player (VSC-550BT)
Product Overview
This section covers the Victrola Vintage 3-Speed Bluetooth Portable Suitcase Record Player, model VSC-550BT. It is a portable, suitcase-style turntable with built-in speakers, offering 3-speed playback (33 1/3, 45, 78 RPM) and Bluetooth connectivity for wireless audio streaming from external devices. It also includes Aux-in and headphone jack capabilities.
Safety Instructions
Read and keep these instructions. Heed all warnings. Do not use near water or moisture. Clean only with a dry cloth. Ensure adequate ventilation (at least 5 cm around the apparatus). Do not install near heat sources. Do not defeat the plug's safety features. Protect the power cord. Use only manufacturer-specified accessories or carts/stands. Unplug during lightning storms or when unused for long periods. Refer servicing to qualified personnel. Keep the unit in a well-ventilated environment. Do not expose to dripping or splashing; do not place liquid-filled objects on the apparatus. The main plug serves as the disconnect device. This product is for household use only.
Warning Symbols:
- ⚡ (Lightning flash with arrowhead): Alerts to the presence of uninsulated "dangerous voltage" that may pose a risk of electric shock.
- ❗ (Exclamation point): Alerts to important operating and maintenance instructions.
- ? (No smoking symbol): Indicates the apparatus should not be exposed to rain or moisture, and no naked flame sources like candles should be placed on top.
Specifications
| Power Supply | AC Adaptor: 100-240V, 50-60Hz; DC-5V 1A |
| Speaker Impedance | 4ohm, 3W |
| Max Power Consumption | 6W |
| Included | Turntable, Instruction Manual, Turntable Operation Sheet, 5V 1A switching power supply, and 45 RPM adaptor |
Design and specifications are subject to change without notice.
Turntable Layout
The turntable features several components for operation and connectivity:
- 1. TURNTABLE PLATTER
- 2. TURNTABLE SHAFT
- 3. 45 RPM ADAPTOR
- 4. LIFT LEVER
- 5. TONE ARM CLIP
- 6. LINE-IN JACK
- 7. SPEED SELECTION SWITCH
- 8. FUNCTION (BT (BLUETOOTH), LINE-IN, PHONO) KNOB
- 9. AUTO AND MANUAL STOP SELECTION SWITCH
- 10. TONE ARM
- 11. POWER ON/OFF AND VOLUME CONTROL KNOB
- 12. POWER/BLUETOOTH LIGHT INDICATOR
- 13. STYLUS CARTRIDGE
- 14. HEADPHONE JACK
- 15. BUCKLE (for closing the case)
- 16. HANDLE
- 17. SPEAKERS
- 18. RCA OUTPUT JACK
- 19. POWER ADAPTOR JACK
Turntable Operation
Power Supply: Insert the adaptor plug into the DC IN jack on the rear of the unit and connect the AC/DC adaptor to a wall outlet.
Basic Operation:
- Lift the buckle on the front and open the lid.
- Turn the FUNCTION KNOB to the PHONO position. Turn the VOLUME CONTROL KNOB clockwise to power ON the unit (red LED will light).
- Place a record on the TURNTABLE PLATTER and select the desired speed (33 1/3, 45, or 78 RPM) using the SPEED SELECTION SWITCH. Use the 45 RPM ADAPTOR for 45 RPM records.
- Open the TONE ARM CLIP. Push the LIFT LEVER backwards to raise the arm. Gently move the tone arm to the desired position over the record. The turntable will begin to spin when the arm is moved toward the record. Push the lift lever forward to lower the arm onto the record to begin playing. Note: The record spins only when the tone arm is over it if Auto Stop is ON.
- If the AUTO AND MANUAL STOP SELECTION SWITCH is ON, the record will stop automatically. If OFF, it will not stop automatically.
- Adjust the VOLUME CONTROL KNOB for desired volume.
How to Replace the Turntable Needle:
Removing the Stylus: Place a screwdriver at the tip of the stylus and push downward (direction "A"). WARNING: Excessive force may damage or break the stylus. Remove the stylus by pulling it forward and pushing downward.
Installing the Stylus: Hold the tip of the stylus and insert it by pressing (direction "B"). Push the stylus upward until it locks into the tip position (direction "C").
Bluetooth Operation
Connect external Bluetooth-compatible devices wirelessly. Power ON the unit, turn the FUNCTION KNOB to the BT (Bluetooth) position (blue LED flashes). Turn ON Bluetooth on your external device and look for "Vintage Turntable" in the pairing list. Select it to connect; the blue LED will stop flashing upon successful connection. Adjust the VOLUME CONTROL KNOB for sound level.
Aux-In Operation
Connect external audio sources (e.g., MP3 player, phone, computer) via the LINE-IN JACK. Plug a detachable Aux Cable into the LINE-IN socket, turn the FUNCTION KNOB to LINE-IN (purple LED). Connect the other end of the cable to your external source's headphone or line out socket. Power ON and adjust volume.
Earphone Operation
Plug earphones into the headphone jack on the function panel. The built-in speakers will mute. Unplug earphones when not in use for optimal performance and maintenance.
FCC Statement
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. The equipment generates, uses, and can radiate radio frequency energy. If not installed and used per instructions, it may cause harmful interference to radio or television reception. The user is encouraged to try to correct interference by one or more of the following measures: reorient or relocate the receiving antenna, increase separation between equipment and receiver, connect equipment to a different circuit than the receiver, or consult a dealer or experienced radio/TV technician.
Warranty Information
Victrola is a registered trademark of Innovative Technology Electronics LLC.
Innovative Technology Electronics LLC. Limited Warranty: 90 Days Labor, One Year Parts
Innovative Technology Electronics LLC. (IT) warrants the product to be free from "Defects" in materials under normal use for a period of "One Year" from the date of original purchase. The warranty is "Not" transferable. IT agrees, within the initial "90 Day" period, to repair or replace the product if defective at "No Charge". IT will cover the cost to repair or replace damaged "Parts" only for a total period of "One Year" from the date of original purchase. The warranty does not cover cosmetic damage, antennas, AC cords, cabinets, headbands, ear-pads, or damage due to line power surges, improper voltage supply or settings, misuse, mishandling, accident, acts of God, or attempted repair by an unauthorized service agent.
To obtain service, the purchaser MUST present an original sales receipt / proof of purchase. Contact Victrola at www.victrola.com to request an RMA (Return Material Authorization) number. Returns without an RMA number will be refused. Upon receipt and inspection, IT may issue a replacement of equivalent value. To return an item, supply full name, return address, phone number, item purchased, and reason for return.
All returns must be in original packaging or a reasonable substitute. Customer must include full name, shipping address, and telephone number inside the package. No returns to PO Boxes or APO addresses.
Include check or money order for shipping and handling:
- USD $5.00 for items $10.00 to $39.99 (Price Paid Per Unit)
- USD $10.00 for items $40.00 to $99.99 (Price Paid Per Unit)
- USD $16.00 for items $100.00 and up (Price Paid Per Unit)
- Shipping fees are non-refundable.
Send inquiries or RMA requests via the website: www.victrola.com/pages/technical-support (or www.ithomeproducts.com/support).
There are no express warranties except as listed. Repair or replacement is the exclusive remedy. IT shall not be liable for incidental or consequential damages. Implied warranties are limited to the duration of this warranty. Some states may have different limitations.
