Babyletto Dottie Bookcase

Welcome

Your kiddo is growing—and so is their world. We're here to help you build a space that inspires creativity, confidence, and independence (with a little fun along the way). From assembly to everyday use, our goal is to make things easy, thoughtful, and stylish—just like you. Our babyletto community is filled with families like yours, sharing real-life tips, room inspiration, and style ideas. Share your style with us at #babylettokids. Welcome to the next chapter of the babyletto family.

Getting Started

Find your wall material and follow steps to attach the anti-tip kit to your wall.

Icons indicate user and tool requirements:

• Single user not allowed: [user-not-allowed]
• Two users approved: [two-users-allowed]
• Drill forbidden: [drill-forbidden]
• Screwdriver approved: [screwdriver-approved]

For assistance, visit BABYLETTO.COM/SUPPORT or call (323) 282-5163.

Parts List

Parts are not to scale.

• A: FRAME (MARCO / CADRE) x4
• B: TOP SHELF (ESTANTE SUPERIOR / ÉTAGÈRE DU HAUT)
• C: MIDDLE SHELF (ESTANTE MEDIO / ÉTAGÈRE CENTRE)
• D: BOTTOM SHELF (ESTANTE INFERIOR / ÉTAGÈRE DU BAS)
• E: SUPPORT BAR (BARRA DE SOPORTE / BARRE DE SUPPORT) x12

Hardware

Hardware is shown at actual size.

• H1: Screw/Bolt (Tornillo/Perno) x24
• H2: Screw (Tornillo) x24
• H3: Plastic Anchor (Fijación de plástico / Ancrage en plastique) x24

Assembly Instructions

Step 1:

Insert 24 x H3 anchors into the designated holes on shelves B, C, and D.

Step 2:

Attach 24 x E support bars to shelves B, C, and D using 24 x H2 screws.

Step 3:

Connect the four A frame pieces to the shelf assemblies using 12 x H1 bolts.

Step 4:

Complete the structure by attaching the remaining A frame pieces with 12 x H1 bolts.

Anti-Tip Kit Installation

⚠️ Warning: Children have died from furniture tipover. ALWAYS install the tip-over restraint provided.

Installation Steps:

Step 5a:

Secure the anti-tip strap to the rear of the bookcase.

Step 5b:

Mark the wall 1-2 inches (25-50 mm) below the top of the bookcase.

Step 5c:

Find your wall material and follow instructions. Drill a 3/8" (9 mm) hole and insert the provided plastic anchor into the wall (if required for your wall type).

Step 5d:

Fasten the strap or bracket to the wall anchor or stud using the provided screw.

Step 5e:

The anti-tip kit is now installed, securing the bookcase to the wall. Complete!

Final Product and Safety Information

Your Dottie Bookcase is now assembled.

Weight Limit:

80 LBS (36.25 KG).

Care, Storage, and Warranty

Storage:

Store furniture in controlled environments, away from direct sunlight, heat sources, and humidity. Avoid extreme temperature changes which can cause wood to shrink or swell.

Care and Cleaning:

Use a soft, lint-free cloth with a non-toxic cleaner. Wipe dry immediately. Avoid abrasive chemicals or materials. For fabrics, use a non-toxic foaming fabric cleaner or leather cleaner.

Registration:

Register your product at BABYLETTO.COM/REGISTRATIONS.

Part Replacement:

Order parts at BABYLETTO.COM/PARTS or contact by mail: 8700 REX RD. PICO RIVERA, CA 90660.

Warranty:

One year limited warranty. Visit BABYLETTO.COM/WARRANTY for details.

Important Safety Warnings

• Failure to follow these warnings and assembly instructions could result in serious injury or death.
• Read all instructions before use. Keep for future reference.
• Check for damaged hardware, loose joints, missing parts, or sharp edges before and during use. Do not assemble or use if parts are missing or damaged. Contact BABYLETTO for replacements.
• Tighten all screws securely at each step and check frequently.
• If refinishing, use a non-toxic finish specified for children's products.
• This product contains small parts. Keep out of reach of children during assembly.
• Screws may have sharp points. Keep out of reach of children at all times.
• Properly discard all packaging materials after assembly is complete.
• Weight limit: 80 lb (36.25 kg).