UREVO Folding Treadmill

Important Information

IMPORTANT: Read all instructions carefully before using this product. Retain this owner's manual for future reference.

The specifications of this product may vary from this photo, subject to change without notice.

Manufacturer: Shanghai Runmi Technology Co., Ltd.

Address: 15th Floor, Building 21B, No.1158, Zhongxin Rd, Songjiang district, Shanghai, P.R.China

Version: 5.0

Shipping & Handling Symbols: [Fragile Symbol], [Keep Upright Symbol], [This Way Up Symbol], [Recyclable Symbol]. MADE IN CHINA

Service

IMPORTANT: FOR UREVO ONLY

For damaged or defective product, questions, replacement parts or any other service support, please contact the customer service department by the following methods:

For The Best Service, Email us with order ID at: Services@urevosports.com

Response Time: 1-2 Business Days

Emailing with the information above is the best method to receive a response during peak business hours.

Website: www.urevosports.com

PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE.

Scan this QR Code to get the Product Installation Guide ▶️

Important Safety Guidelines

⚠️ Please carefully read this manual before use to ensure your safety and avoid accidents.

1. Wear suitable sports shoes and do not run barefoot for exercise. UREVO assumes no responsibility for abnormalities and injuries caused by failure to wear shoes.
2. Consider your physical condition when you start to train. Train appropriately and regularly to ensure sufficient physical strength. Improper or excessive training will not benefit your health.
3. Children under 10 years old are not allowed to use this product. Persons who are indisposed, mentally disabled, or lack common sense are not allowed to use it. Take care of elders and children and keep them from approaching or touching the product during its use. UREVO assumes no responsibility for accidental injuries due to improper operation, unauthorized modification or disassembly, or ignorance of precautions.
4. This product is suitable for home use rather than professional training, testing, or medical purposes.
5. A damaged power cord must be replaced by the manufacturer or professional maintenance personnel to avoid danger.
6. Check all parts before use to ensure screws and nuts are tightened.
7. Wear tight fitting clothes to prevent clothes from being caught by the machine. Keep children or pets away from the equipment to avoid accidents.
8. Place the equipment on smooth, clean, and level ground. Ensure there are no sharp objects nearby. Do not use it near water and heat sources.
9. Avoid touching any moving parts with hands. Do not place hands and feet in the space under the running belt.
10. This product is for one person only when it is running.
11. Please use only the accessories provided by the manufacturer and do not attempt to repair on your own.
12. The maximum weight capacity for this product is 265 lbs / 120 kg. DO NOT EXCEED MAXIMUM WEIGHT CAPACITY.
13. Please make sure to add 10ml of lubricant when using the product for the first time. Add lubricating oil every one year or after 100 hours of working.

DANGER - To reduce the risk of electric shock: Always unplug this appliance from the electrical outlet immediately after using and before cleaning.

WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons:

1. An appliance should never be left unattended plugged in. Unplug from outlet when not in use, and before putting on or taking off parts.
2. Do not operate under blanket or pillow. Excessive heating can occur and cause fire, electric shock, or injury.
3. Close supervision is necessary when this appliance is used by, on, or near children, invalids, or disabled persons.
4. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
5. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to a service center for examination and repair.
6. Do not carry this appliance by supply cord or use cord as a handle.
7. Keep the cord away from heated surfaces.
8. Never operate the appliance with the air openings blocked. Keep the air openings free of lint, hair, and the like.
9. Never drop or insert any object into any opening.
10. Do not use outdoors.
11. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
12. Caution - To reduce the risk of injury from moving parts - Unplug before servicing.
13. Warning - To reduce the risk of Electric shock - Unplug before cleaning or servicing.
14. Warning - Risk of personal injury - Keep children under the age of 13 away from the machine.
15. To disconnect, turn all controls to the position, then remove plug from outlet.
16. Connect this appliance to a properly outlet only. See grounding instructions.
17. This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Keep children under the age of 13 away from this machine.

SAVE THESE INSTRUCTIONS

GROUNDING INSTRUCTIONS:

This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

DANGER - Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product; if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

Power Supply Precautions

1. Use 110VAC 60Hz power supply.
2. The power plug must be reliably grounded, and the socket must be equipped with a dedicated circuit to avoid sharing a circuit with other electrical equipment.
3. Directly plug the power cord firmly into the socket.
4. Use a qualified socket to avoid dangers. If the plug does not match the socket, do not use the plug and ask an electrician to handle it.
5. Do not let the power cord contact the rollers. Do not put the power supply on the running belt. Do not use any damaged plugs.
6. Do not pull out or insert the power plug with wet hands.
7. Pull out the plug from the socket before cleaning and maintenance.
8. Check whether the treadmill functions normally before use. If normally, you can use it; otherwise, do not use it and contact Customer Service Department.
9. Clip the safety lock wire to your clothes before exercise for emergency stop.
10. Ensure that there is a 2000*1000mm vacant safe area without obstacles behind the treadmill during exercise.
11. In case of an abnormality, pull up with the handrail to keep your feet off the running belt and jump out of the treadmill.
12. If you feel dizzy, chest pain, nausea, or breathless during exercise, stop exercising immediately and consult a fitness coach or doctor.
13. Do not use this product outdoors, under high humidity or sunlight.
14. Power off and unplug when you leave.

Precautions for Installation

1. Read the instructions carefully before installation.
2. Take out all parts from the package and separately place them on the clean ground for your overall check and easy installation.
3. Check whether all parts are complete according to the packing list.
4. Be careful when using tools or handling. Do not install the product by force.
5. Check whether tools and packaging materials left behind are dangerous. Plastic and foam are harmful to children.
6. Install the product properly after carefully reading the steps and instructions in the manual.
7. This product must be properly installed by an adult. If necessary, ask a professional to install it.

⚠️ Warning: Install the product properly and do not damage it.

Package List

Parts List

• Speed/Function: 1 pc. (Diagram shows a console unit)
• Safety lock: 1 pc. (Diagram shows a safety key with a lanyard)
• Manual & Warranty card: 1 pc. (Diagram shows an open book icon)

Tool Pack

• A: 6mm L-shaped hexagon wrench: 1 pc. (Diagram shows an L-shaped hex wrench)
• B: Long knob: 2 pcs. (Diagram shows a knob with a long threaded shaft)
• C: Short knob: 2 pcs. (Diagram shows a knob with a short threaded shaft)
• D: Lubricating oil: 1 bottle. (Diagram shows a bottle of oil)
• E: Multi-function open spanner: 1 pc. (Diagram shows a multi-tool spanner)
• F: Plastic gasket: 4 pcs. (Diagram shows a flat plastic washer)

Product Structure

The treadmill consists of the following main components:

• Display: Located at the top of the console.
• Column: The vertical support structure connecting the base to the console.
• Knob: Used for securing the column and dashboard.
• Edge strip: Along the sides of the running belt.
• Adjusting foot pad: Located at the base of the treadmill for leveling.
• Power: Power input port, typically at the rear base.
• Safety lock: A magnetic key system for emergency stop.
• Motor cover: Encloses the motor unit.
• Running belt: The surface for walking or running.
• Rear shield (L/R): Covers the rear rollers.

Assembly

Step 1:

Lift the machine out of the package and place it on the ground. Hold the column tube and stand it up. Apply gasket F to knob B and then fix it at the bottom connection of the treadmill, tightening the knob securely. Similarly, use knob C with gasket F to fix both ends of the dashboard onto the treadmill column, tightening the knobs.

(Diagram shows the treadmill base, column, dashboard, and indicates where to attach knobs B and C with gaskets F, with close-up views of the connection points.)

Step 2:

Install the red safety switch (the end with its magnet) at the designated place with a yellow label in the middle below the dashboard. The installation of the machine is now complete.

(Diagram shows the treadmill with the safety switch magnet being placed near the console.)

Step 3: Operation

Plug in the power cord and turn on the Power. The indicator will light up, you will hear a beep, and the display will also light up.

(Diagram shows the power connection point on the treadmill base.)

The treadmill will only work if the safety lock is properly placed on the slot of the dashboard. Clip the safety lock to your clothes. In the unlikely event of an accident, pull off the safety lock to immediately shut down the motor. If you want to continue using the treadmill, put the safety lock back.

Storage

Folding the treadmill

Turn off the power before folding. Loosen the upper and lower aluminum knobs of the column counterclockwise, and then fold the column and the dashboard as shown in the diagram.

(Diagram shows the treadmill being folded by lowering the console and column.)

NOTE: Make sure the power is turned off and the power plug is removed from the socket.

Dashboard Operation

1. Display Interface

(Diagram shows the treadmill console with buttons labeled PROG., MODE, SPEED +, SPEED -, START, STOP, and a safety key slot. It also shows warning messages about keeping children away and reading the manual.)

2. Window

(Diagram shows the main display window with readouts for TIME, DISTANCE, SPEED, and CALORIES.)

The treadmill will automatically turn off the screen after 5 minutes of data retention.

3. Windows and Keys

• 3-1: The main LCD window displays time, distance, calorie, and speed.
• 3-2: Function keys: Program, Mode, Start, Stop, Speed +, and Speed -.
• 3-3: Description of function keys:
  • [Start Button]: In stop mode, press this key and the motor will start after a 3-second countdown (333, 222, 111 display).
  • [Stop Button]: In running mode, press this key and the treadmill will stop running.
  • [Speed Up Button]: In setting mode, press this key to increase the set value. When the motor is running, press this key to increase the speed.
  • [Speed Down Button]: In setting mode, press this key to decrease the set value. When the motor is running, press this key to decrease the speed.
  • [Program Button]: In stop mode, press this key to select programs in a cycle: manual mode -> P01 -> P02 -> ... -> P12.
  • [Mode Button]: When manual mode (initial state) is selected, the initial value (0.0) of speed displays. Press this key to select modes in a cycle. In manual mode, it cycles through countdown time (30:00), countdown distance (1.0), countdown calorie (50), and normal mode.

4. Start

1. Install the safety lock properly on the panel. Turn on the main power switch. The LCD will display all segments for 2 seconds, then the software version number. The treadmill enters manual (normal) mode.
2. Press the [Start Button]. Accompanied by a "bi" sound, the screen will display 333-222-111 in turn, and then the treadmill will start.

5. Description of programs

• 5-1: Manual program: Includes normal mode, time countdown, distance countdown, and calorie countdown.
• 5-2: 12-speed programs: P1, P2, P3, P4, P5, P6...P11, P12.
• 5-3: Entering the manual mode:
  • a: Turn on the power switch to directly enter normal mode (manual mode).
  • b: In stop mode, press the [Mode Button] to enter normal mode (manual mode).
  • c: Three functions in manual mode: time setting, distance setting, and calorie setting.
    • When entering manual mode, it starts in normal mode with initial values.
    • In manual (normal) mode, press the [Mode Button] to enter time countdown mode. 30:00 displays and flashes. Press [Speed +] or [Speed -] to set countdown time (range: 5:00-99:00).
    • In time countdown mode, press [Mode Button] to enter distance countdown mode. 1.0 displays and flashes. Press [Speed +] or [Speed -] to set countdown distance (range: 1.0-999.9 miles).
    • In distance countdown mode, press [Mode Button] to enter calorie countdown mode. 50 displays and flashes. Press [Speed +] or [Speed -] to set countdown calorie (range: 20-999 kcal).
• 5-4: Operation in manual mode:
  • a. Press the [Start Button] and the motor starts.
  • b. Press [Speed +] or [Speed -] to adjust the speed.
  • c. Press the [Stop Button] and the speed slowly decreases until it stops.
  • d. When the set time decreases to zero, the speed slowly decreases until it stops.
  • e. When the set distance decreases to zero, the speed slowly decreases until it stops.
  • f. When the set calorie decreases to zero, the speed slowly decreases until it stops.

6. Programs

• 6-1: The initial time is set to 30 minutes. You can set time within 5:00-99:00 using the [Speed +] or [Speed -] keys.
• 6-2: Press [Start Button] to start the motor at the speed set in the program.
• 6-3: Press the [Speed +] or [Speed -] key to adjust the speed.
• 6-4: Each program is divided into 16 segments, where the running time is 1/16 of the set time.
• 6-5: A beep sounds when switching between segments.
• 6-6: When the set time decreases to zero, the speed slowly decreases until it stops.

7. Safety Lock

In any mode, if the safety lock is pulled off, the window displays "E -7" and the buzzer sounds. If the motor is running, it will stop immediately. No operations can be performed except shutting down. When the safety lock is correctly installed, the treadmill will enter standby state again and wait for instructions.

8. Value Display

Appendix 1 Exercise in P1-P12 programs

(Table showing speed settings for 16 segments across 12 programs P1-P12. Each cell contains a speed value.)

9. Sleep

When no operations are performed for more than 10 minutes, the system turns off all displays and enters sleep mode. Press any key to wake up.

10. Common Failures of Control System and Troubleshooting

The following present error codes displayed on the electronic meter and their solutions:

If the problem in your treadmill is not included above, and you are not sure how to solve it, please contact us (Email: Services@urevosports.com) timely and do not handle it by yourself.

Adjustment of Running Belt

Situations Requiring Adjustment

The following two situations need to adjust the running belt:

Situations 1: The running belt has been adjusted before shipment, but it would be stretched and its center position would deviate from the original position after use, causing damage to the foot edge strips and rear cover due to rubbing. It is normal that the running belt is stretched during use.

Situations 2: If the running belt slips or does not run smoothly when you use the treadmill, you can adjust the tightness of the running belt.

Adjust the position of the running belt:

When you are running on the treadmill, the pressure on the running belt is imbalanced as the force applied by your feet on the belt is different, which will deviate the running belt from the center. Such deviation is normal and the running belt will return to the middle if no one runs on it. If it is not centered, you need to adjust the running belt until it moves to the middle.

1. Allow the treadmill to run with no load and adjust the speed to 7.5MPH.
2. Observe the distance between the running belt and the left and right edge strips.
   • If it moves to the left, use the hexagon wrench to rotate the left screw by 1/4 turn clockwise.
   • If it moves to the right, use the hexagon wrench to rotate the right screw by 1/4 turn clockwise.
   • If the running belt is still not centered, repeat the above operation until it moves to the middle.
3. When the running belt is in the middle, adjust the speed to 7.5MPH, and observe the deviation and smoothness of the running belt. If there is a deviation, repeat the adjustment steps. Warning! Do not tighten the rollers too much. This will result in permanent damage to the bearings.

If the above operations are not effective, you need to tighten the running belt a little more.

Adjust the tightness of the running belt:

1. Insert the 6mm hexagon wrench A into the adjusting screw on the left side of the running belt, and rotate the wrench by 1/4 turn clockwise to adjust the rear roller to tighten the running belt.
2. Repeat Step 1 and adjust the screw on the right. Be sure to rotate the adjusting screws by the same amplitude so that the rear rollers will be parallel to the frame after adjustment.
3. Repeat Steps 1 and 2 until the running belt does not slip.
4. Note that the running belt cannot be tightened too much. This would damage the running belt, the roller bearings, etc., increase the pressure on the front/rear rollers, and cause abnormal noise or other problems. If you want to reduce the tension of the running belt, rotate the wrench counterclockwise with the same amplitude on both sides.

(Diagram shows arrows indicating to tighten the rear rollers on both sides using a wrench.)

Lubricating & Maintenance

The treadmill has been lubricated before shipment. However, frequent check of lubricity of the treadmill helps keep it in the best condition. The treadmill must be lubricated after one year of use or 100 hours of running.

Each time when the treadmill is used for 30 hours or 30 days, pull up the running belt at the side and reach out your hand to touch the surface of the treadmill as far as possible. If you feel touching silicone oil, it is not necessary to add oil. If you feel high dryness, follow the instructions below to apply oil.

Use non-petroleum silicone oil.

Lubricating the treadmill:

1. Add oil on the surface below the running belt. (Diagram shows oil being applied under the belt.)
2. Cut a small opening on the oil bottle mouth for easy squeezing out oil.
3. Raise the running belt so that you can place the oil bottle to the bottom of the running belt and inject oil to the middle of the running board. Put down the running belt, press the oil filling port, and rotate the running belt to apply oil evenly on it.
4. Start the treadmill and wait one minute until oil is evenly distributed before using it.

Maintenance

Clean the treadmill frequently to extend its service life.

1. When cleaning the treadmill, be sure to pull out the power cord from the socket to shut off the power.
2. Use a clean towel or wet cloth to wipe away sweat stains and debris from the dashboard and other parts.
3. Do not use corrosive goods or liquids to prevent electronic components from damage. Do not expose the electronic components to sunlight.
4. Clean up the ground once a week to remove the dirt brought by shoes and other debris.

Warm-up

Before walking on the machine, it is best to do stretch exercises. A successful exercise plan must include warm-up, aerobic and relaxing exercises. You should do exercises at least twice or three times a week and rest one day after exercise. A few months later, you can increase the times of exercise to four or five one week.

At the end of aerobic exercise, repeated warm-up can also reduce muscle soreness. UREVO recommends the following warm-up and relaxation exercises.

1. Stretch down: Bend your knees slightly, bend your body slowly forward, relax your back and shoulders, and try your best to touch your toes. Hold for 10-15 seconds, then relax. Repeat three times. (Figure 1: Diagram shows a person bending forward to touch their toes.)
2. Hamstring stretch: Sit on a clean seat cushion and straighten one leg. Tuck the other leg inward so that it is close to the inside of the straightened leg. Try to touch your toes with your hand. Hold for 10-15 seconds, then relax. Repeat three times on each leg. (Figure 2: Diagram shows a person sitting with one leg extended and reaching for their toes.)
3. Shank and tendon stretch: Lean your body forward with hands against the wall and take a step forward with your left leg. Straighten your right leg and step on the ground with your left leg; then bend your left leg, hold it for 10-15 seconds, and then relax. Repeat three times on each leg. (Figure 3: Diagram shows a person in a lunge-like pose, leaning forward with hands on a wall.)
4. Head movement: Tilt your head to the right and count one; turn your head to the back and count two; turn your head to the left and count three; finally turn your head back to lower forward onto your breast and count four. Relax and repeat three times. (Figure 4: Diagram shows a person performing neck tilts.)
5. Waist movement: Stretch your arms to the left and right, then slowly lift them over your head. Extend your right arm as far as possible to the ceiling, hold for one second, and feel the stretch of your right muscles. Repeat the same action on your left arm. (Figure 5: Diagram shows a person stretching their arms overhead.)

Warranty

MANUFACTURER'S LIMITED WARRANTY

UREVO warrants to the original purchaser that this product is free from defects in material and workmanship when used for the purpose intended, under the conditions that it has been installed and operated in accordance with UREVO Owner's Manual. UREVO's obligation under this warranty applies to the following:

COMPONENT LENGTH OF WARRANTY

• Structural Frame: 1 year (For Home Use Only)
• All Other Components: 90 days (For Home Use Only)

Exclusions from Warranty Coverage:

UREVO does not warrant against and is not responsible for, and no implied warranty shall be deemed to cover, any product failure, product malfunction, or damages attributable to:

1. Improper installation and/or failure to abide by UREVO's installation guidelines.
2. Use of this product beyond normal home use, or in an application for which it was not designed.
3. Cosmetic items such as scratches, dents, or discolorations.
4. Damage caused by normal wear and tear, vandalism, accidental impact, or by animals.
5. Any act of Nature (such as fire, flooding, snow, ice, hurricane, earthquake, lightning, or other natural disaster), environmental condition (such as air pollution, mold, mildew, etc.), or staining from foreign substances (such as dirt, grease, oil, etc.).
6. Normal weathering due to exposure to sunlight, weather, and atmosphere which can cause colored surfaces to flake, chalk, accumulate dirt, or stains.
7. Improper operation, alteration, handling, storage, abuse, or neglect of the products.

UREVO, using its sole discretion, will either repair or replace free of charge any part(s) proven to be defective under normal home use. Any repair or replacement shall provide no new warranty coverage, but shall retain only the remaining portion of the original product's warranty. This warranty is offered only to the original purchaser and is not transferable. Proof of original purchase is required.

Replacement parts can be ordered by emailing the customer service department: Services@urevosports.com

Open Monday thru Friday 8:00 AM – 5:00 PM (PST).

When ordering replacement parts, please have the following information ready:

1. Order Number
2. Description of Parts (Add photos or videos if helpful)
3. Part Number
4. Date of Purchase