Beyerdynamic AMIRON ZERO

Controls and Components

Identify the parts of your AMIRON ZERO earbuds and charging case:

Putting On Your Earbuds

1. Remove the earbuds from the charging case. Remove any protective film from the charging contacts. Place the earbuds back in the case to charge the integrated batteries before first use.
2. Clip the earbuds onto your ears, ensuring the sound opening points towards your ear canal.
3. Adjust the earbud for a comfortable wearing angle.
4. Tap the designated area on the earbud with one finger to control it. Do not overbend the arch, as this may affect wearing comfort.

Using the beyerdynamic App

The beyerdynamic App provides customized control for your AMIRON ZERO earbuds.

• Download the app from the App Store (for iOS devices) or Google Play (for Android devices).
• Use the app to customize operation settings and perform software updates.
• These settings are saved directly to your AMIRON ZERO earbuds, allowing you to use them with any playback device.

Powering On and Off

• Power On: The AMIRON ZERO earbuds automatically power on when you open the charging case.
• Power Off: They automatically power off when you place them back in the charging case and close the lid.
• Auto Power Off: The earbuds will automatically turn off if not used for 10 minutes. This time frame can be adjusted in the beyerdynamic App.

Pairing with Devices

1. For the first use, the AMIRON ZERO automatically enters pairing mode when you open the charging case.
2. If automatic pairing does not occur, open the charging case, insert the earbuds, and press and hold the Multi Function Button (MFB) on the charging case for 5 seconds until the LED indicator on the case flashes alternately red and white.
3. On your mobile device, select "AMIRON ZERO" from the list of available Bluetooth devices.

Music Control

Control music playback using tap gestures:

• Double-tap (●●) on either earbud: Start or stop playback.
• Triple-tap the right earbud (●●●): Play the next track.
• Triple-tap the left earbud (●●●): Play the previous track.

Call Control

Manage phone calls using tap gestures:

• Double-tap (●●) on either earbud: Accept an incoming call or switch between two active calls.
• Triple-tap (●●●) on either earbud: Hang up the current call.
• Triple-tap (●●●) on either earbud: Reject an incoming call.

Charging

1. Place the earbuds into the charging case.
2. Close the lid and connect the USB cable to the charging port on the case.
3. Charging Times:
   • 10 minutes of charging provides approximately 110 minutes of playback time.
   • A full charge offers up to 6 hours of playback time.
   • Using the charging case provides an additional 14 hours of playback.
4. It is recommended to fully charge the batteries in both the charging case and the earbuds before the first use.
5. The LED indicator on the charging case will illuminate permanently white when the batteries are fully charged.
6. For more detailed information on LED indicators and charging, please refer to the full manual at www.beyerdynamic.com.