Beyerdynamic AMIRON ZERO

Controls and Components

Identify the parts of your AMIRON ZERO earbuds and charging case:

Putting On and Wearing

1. Remove the earbuds from the charging case. Peel off the protective film from the charging contacts located under each earbud. Place the earbuds back into the charging case to charge the integrated batteries before first use. Refer to the "Charging" section.
2. Clip the earbuds to your ear, ensuring the sound opening (speaker grill) points towards your ear canal.
3. Adjust the earbud to a comfortable wearing angle.
4. Tap the corresponding touch-sensitive area (MFB) with one finger to control the earbud. ⚠️ Please do NOT overbend the arch, as this may impact wearing comfort.

Using the beyerdynamic App

The beyerdynamic App provides customized control for your AMIRON ZERO earbuds.

• Download the beyerdynamic App from the Apple App Store (for iOS devices) or Google Play (for Android devices).
• With the app, you can perform customized operation settings and software updates. These settings are saved to your AMIRON ZERO, allowing them to be used with any playback device connected to your earbuds.

Powering On and Off

• Automatic Power On: AMIRON ZERO will automatically power on when you open the charging case.
• Automatic Power Off: AMIRON ZERO will automatically power off when you place the earbuds in the case and close the lid.
• Auto-Off Timer: AMIRON ZERO will automatically turn off if not used for 10 minutes. This time frame can be adjusted in the beyerdynamic App.

Pairing with Your Device

• First-time Use: When you use the AMIRON ZERO for the first time, they automatically enter pairing mode when you open the charging case.
• Manual Pairing: If not in pairing mode, open the charging case, insert the earbuds, and press and hold the Multi Function Button (MFB) for 5 seconds (●●●●●) on the charging case until the LED indicator starts flashing alternately red and white.
• On your mobile device, select "AMIRON ZERO" from the pairing list (?).

Music Control

Control your music playback with simple taps on the earbuds:

• Double-tap (●●): Start or stop playback.
• Triple-tap the right earbud (●●●): Play the next track.
• Triple-tap the left earbud (○○○): Play the previous track.

Call Control

Manage your calls using the earbud controls:

• Double-tap (●●): Accept an incoming call or switch between two active calls.
• Triple-tap (●●●): Hang up the current call.
• Triple-tap (●●●): Reject an incoming call.

Charging

1. Place the earbuds into the charging case.
2. Close the lid and connect the USB cable to the socket on the charging case.

Charging Times & Playback:

• 10 minutes of charging provides approximately 110 minutes of playback time.
• Fully charged earbuds offer up to 6 hours of playback time.
• The charging case provides an additional 14 hours of playback time when fully charged.

⚠️ Please fully charge the batteries in the charging case and earbuds before using AMIRON ZERO for the first time.

The LED indicator on the charging case illuminates permanently white when the batteries are fully charged.

For further information on LED displays and detailed instructions, please refer to the full manual at www.beyerdynamic.com.