CREATE Aroma Studio Aroma Diffuser User Manual
Thank you for choosing the CREATE Aroma Studio Aroma Diffuser. Please read these instructions carefully before use to ensure correct operation.
Safety Advice
Following these safety precautions correctly will reduce the risk of death, injury, and electric shock. Keep this manual in a safe place for future reference, along with the completed warranty card, original product packaging, and proof of purchase. If possible, pass these instructions on to the next owner of the appliance. Always follow basic safety precautions and accident prevention measures when using an electrical appliance. CREATE assumes no liability for customers failing to comply with these requirements.
- Only use the power cord supplied with the unit.
- Always remove the power cord before cleaning the diffuser.
- Essential oil should not come into contact with the exterior surface of the unit. Use only 100% pure essential oil. Do not use fragrance oils.
- To clean the aroma diffuser, first remove the top cover. Empty the water from the drainage outlet on the side of the water tank.
- The vibration plate inside the bottom of the unit should not come into contact with any hard or sharp objects.
- To remove possible buildup, gently use a cotton swab dipped in white vinegar to wipe out the inside.
- Dry with a soft cloth to avoid mineral buildup.
- Do not use strong detergents.
Parts List
- Light / Mist button
- Air outlet
- Water tank
- Air intake
- DC socket
Diagrams illustrating the parts of the Aroma Diffuser are provided, showing numbered components corresponding to the list above.
Instructions
- Connect the power cord to the DC jack on the main body.
- Remove the top cover from the base.
- Add cool water into the water tank up to the max fill line.
- Add 2-3 drops of essential oil or more oils according to your preferences.
- Replace the top cover.
- Press the light/mist button:
- Press once: Mist is activated. The 7-color LED lights change automatically.
- Press twice: The LED light color is fixed.
- Press three times: Mist is activated, but the light turns off.
- Press four times: Mist and light turn off.
- When the unit is working, press the button for over 3 seconds and the unit will shut off (including mist and LED light).
- The unit will automatically shut off when the water level becomes too low.
Diagrams illustrating the operation sequence of the light/mist button are provided, showing 6 steps.
Technical Specifications
| Characteristic | Value |
|---|---|
| Power | 5W |
| Voltage | DC 5V |
| Noise level | 35 dB |
| Capacity | 120 ml |
| Operating time | 8-9 hours (4-5 continuous mist) |
| Dimensions | 120x120x123 mm |
This product complies with European Directives: 2012/19/EU and 2015/863/EU concerning the restriction of the use of dangerous substances in electric and electronic equipment, as well as their waste disposal. The symbol of a crossed-out dustbin indicates that the product must be collected separately as waste at the end of its service life. Proper separate collection contributes to preventing negative environmental and health effects and promotes recycling.
