CREATE Air Tower User Manual

Introduction

Thank you for choosing the CREATE Air Tower fan. This manual provides essential information for safe and correct use of your appliance.

Safety Precautions

Before using this electrical appliance, the following basic precautions should always be followed:

• The unit may be used only for the intended purposes. The manufacturer will not be held responsible for damages resulting from improper use or faulty handling.
• Do not use outdoors or for commercial purposes. This appliance is intended for household use only. Using the unit for commercial purposes will void the warranty.
• Ensure that the voltage indicated on the Technical Specifications matches the mains voltage before plugging in the appliance.
• Children and animals should be supervised to ensure that they do not play with the appliance or the packaging material.
• This appliance can be used by children and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Do not connect this appliance to an extension cord.
• Never lift up, carry or unplug the appliance by pulling from the power cord.
• Do not touch the fan's moving parts. Never insert any objects through the grille when the fan is working.
• Always unplug the appliance before cleaning or when idle.
• To avoid risk of electric shock, do not plug the appliance in a damp or wet room.
• Never immerse the cord, plug or main body of the appliance in water or other liquids. Should the unit fall into water, immediately unplug it from the mains and have the appliance checked by an expert before using it again. It may cause fire, electric shock, injury or death.
• Only use accessories recommended by the manufacturer.
• When not in use, store in a safe, dry, childproof location.
• Do not pick up or operate the appliance if the power supply cord or the plug are damaged, or if the unit is malfunctioning or has been dropped or damaged in any way. In case of damage, contact the aftersales service. A damaged cord or plug must be exclusively replaced by the manufacturer or a qualified person in order to avoid injuries.

Parts List

Diagram Description: A line drawing of the CREATE Air Tower fan. Numbered labels point to: 1. Control panel (top of the tower), 2. LED display (below control panel), 3. Main body (the tall tower section), 4. Air outlet (grille along the main body), 5. Stand (the base structure), 6. Base (the bottom circular part).

• 1. Control panel
• 2. LED display
• 3. Main body
• 4. Air outlet
• 5. Stand
• 6. Base

Assembly

Diagram Description: Illustrations showing the assembly steps for the fan's base. One image depicts two base pieces being joined and secured with screws. Another image shows the power cord being fed through the central hole of the assembled base, with a channel visible on the underside for cord management. A third image shows the main body of the fan being aligned and attached to the base with screws.

1. Snap the two pieces of the base together and secure them with three screws using a Phillips screwdriver.
2. Once you have attached both pieces of the base, feed the power cord through the centre hole of the base. The base is equipped with a channel on the bottom to put the cord through.
3. Align the main body of the fan with the base. Secure it using 3 long screws and a Phillips screwdriver.

Remote Control

Diagram Description: Two diagrams are shown. The first is a handheld remote control with buttons labeled with icons for Power, Speed, Mode, Timer, and Oscillation. The second diagram shows the control panel on the fan itself, with similar buttons and an LED display.

• Install the battery (not included).
• All of the buttons on the remote work as the ones on the control panel.

Operating Instructions

You can operate the appliance using the controls on the fan or with the remote control. Place the fan on a stable flat surface and plug it into a 220-240V~A.C. electrical outlet.

• Power: Turn the fan on by pressing the "Power button". To turn the fan off, press the button again.
• Speed: Use the "Speed button" to select the desired speed. Options: Low speed, Medium speed, High speed. The speed setting will be displayed on the LED panel.
• Mode: The "Mode" button switches between the different modes: NM (Normal), NT (Natural), SL (Sleep).
• Timer: The fan is equipped with a timer that allows you to set the operation time from half an hour to 7.5 hours.
• Oscillation: Press the [OSC] button to turn on and off the oscillation feature.

Cleaning and Maintenance

• Always unplug the appliance before cleaning and maintaining the appliance.
• There are no user serviceable parts inside; please contact the aftersales service.
• To clean the fan, wipe the outer surface with a soft, damp cloth and use a brush to dust the air outlet.
• Do not clean the appliance with alcohol or any solvent cleaning products. Never immerse the housing in water for cleaning.

Compliance Information

This product complies with EU Directives 2012/19/EU and 2015/863/EU regarding the restriction of hazardous substances in electrical and electronic equipment and their waste disposal. The symbol of a crossed-out dustbin on the packaging indicates that the product must be collected separately for recycling at the end of its service life. Please dispose of responsibly according to local regulations.

Markings: CE, RoHS. Made in P.R.C. (Date code: 12/20 V1)